Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis
An experimental study and numerical calculation are conducted to investigate the crack propagation in a 2D woven composite. Crack propagation tests of single-layer composite plate specimens permit this process to be directly followed. Analysis of their fracture surfaces reveals crack propagation pat...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2018 |
| Hauptverfasser: | Wang, Y.Q., Cheng, P., Liu, X.S., Bao, Y.J., Gao, H. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173999 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis / Y.Q. Wang, P. Cheng, X.S. Liu, Y.J. Bao, H. Gao // Проблемы прочности. — 2018. — № 5. — С. 127-134. — Бібліогр.: 20 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
Formation of crystal stock in the process of the plate shape for type Ib large synthetic diamond single crystals
von: G. Gao, et al.
Veröffentlicht: (2020)
von: G. Gao, et al.
Veröffentlicht: (2020)
Effect of Double-Atom Vacancy Defects on the Elastic Properties of Single-Layered Graphene Sheets
von: Wang, Z.Q., et al.
Veröffentlicht: (2017)
von: Wang, Z.Q., et al.
Veröffentlicht: (2017)
Fabrication and mechanical performance of 3D woven basalt fiber composite materials
von: Lihua Lv, et al.
Veröffentlicht: (2017)
von: Lihua Lv, et al.
Veröffentlicht: (2017)
Zakarpatskiy perlit as component of mineral woven fabric material
von: O. O. Tytova, et al.
Veröffentlicht: (2019)
von: O. O. Tytova, et al.
Veröffentlicht: (2019)
A model of crack with cohesive zone for a mixed mode of fracture
von: M. F. Selivanov
Veröffentlicht: (2015)
von: M. F. Selivanov
Veröffentlicht: (2015)
Initial Fracture of Viscoelastic Isotropic Plate with Two Collinear Cracks of Equal Length
von: A. A. Kaminskij, et al.
Veröffentlicht: (2014)
von: A. A. Kaminskij, et al.
Veröffentlicht: (2014)
Finite Element Modeling of Plain Weave Fabric from an Un-Woven Initia Yarn Configuration
von: Ferranto, J.S., et al.
Veröffentlicht: (2015)
von: Ferranto, J.S., et al.
Veröffentlicht: (2015)
Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
von: Zhang, Z.Q., et al.
Veröffentlicht: (2016)
von: Zhang, Z.Q., et al.
Veröffentlicht: (2016)
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Wang, Y.X., et al.
Veröffentlicht: (2014)
von: Wang, Y.X., et al.
Veröffentlicht: (2014)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2019)
von: Hu, X.L., et al.
Veröffentlicht: (2019)
Study on the Fabrication of Nano-SiC/Ni-P Composite Coatings with the Assistance of Electromagnetic-Ultrasonic Compound Field
von: Zhou, H.Z., et al.
Veröffentlicht: (2017)
von: Zhou, H.Z., et al.
Veröffentlicht: (2017)
Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
Evaluation of crack growth resistance of structural materials under mixed-mode fracture macromechanisms
von: Wen Guang Song, et al.
Veröffentlicht: (2018)
von: Wen Guang Song, et al.
Veröffentlicht: (2018)
Numerical bifurcation of a delayed diffusive hematopoiesis model with Dirichlet boundary condition
von: X. Y. Liu, et al.
Veröffentlicht: (2024)
von: X. Y. Liu, et al.
Veröffentlicht: (2024)
On the geometry of a totally damaged zone near a mode III crack tip in creep-damage coupled problem
von: Stepanova, L.V.
Veröffentlicht: (2005)
von: Stepanova, L.V.
Veröffentlicht: (2005)
Mode I crack initiation in orthotropic viscoelastic plate under biaxial loading
von: O. S. Bogdanova
Veröffentlicht: (2013)
von: O. S. Bogdanova
Veröffentlicht: (2013)
Modeling of fatigue crack growth in plates under arbitrary Mode I stress
von: A. Jankowiak, et al.
Veröffentlicht: (2013)
von: A. Jankowiak, et al.
Veröffentlicht: (2013)
Modeling of fatigue crack growth in plates under arbitrary Mode I stress
von: Jankowiak, А., et al.
Veröffentlicht: (2013)
von: Jankowiak, А., et al.
Veröffentlicht: (2013)
Accumulation of damages in materials during fracture
von: S. A. Nedoseka, et al.
Veröffentlicht: (2017)
von: S. A. Nedoseka, et al.
Veröffentlicht: (2017)
Investigation fracture of an orthotropic plate with a circular hole and two edge cracks by the method of dynamic elasticity
von: M. P. Malezhyk, et al.
Veröffentlicht: (2019)
von: M. P. Malezhyk, et al.
Veröffentlicht: (2019)
Effect of initial stresses on fracture of composite material with a near-surface Mode III crack
von: V. L. Bohdanov
Veröffentlicht: (2013)
von: V. L. Bohdanov
Veröffentlicht: (2013)
Pre-Fracture Zone Near Mode I Crack Tip in Nonlinearly Elastic Orthotropic Material
von: A. A. Kaminskij, et al.
Veröffentlicht: (2019)
von: A. A. Kaminskij, et al.
Veröffentlicht: (2019)
Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)
Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)
Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)
von: He, X., et al.
Veröffentlicht: (2014)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2015)
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2015)
Fracture Process in ± θ Laminates Subjected to Mode II Loading
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
Dynamic Properties of Purkinje Cells Having Different Electrophysiological Parameters: A Model Study
von: Zhang, X., et al.
Veröffentlicht: (2015)
von: Zhang, X., et al.
Veröffentlicht: (2015)
Mathematical modeling of fracture processes of plates with systems of cracks under long-term loads, high temperatures and corrosive medium
von: Ye. Andreikiv, et al.
Veröffentlicht: (2016)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2016)
Synchronization analysis for a class of genetic oscillator networks
von: Q. Gao, et al.
Veröffentlicht: (2017)
von: Q. Gao, et al.
Veröffentlicht: (2017)
Synchronization analysis for a class of genetic oscillator networks
von: Gao, Q., et al.
Veröffentlicht: (2017)
von: Gao, Q., et al.
Veröffentlicht: (2017)
Methodology of HTHP diamond single crystal brittle fracture investigations by crack propagation analysis under shock load
von: L. M. Devin, et al.
Veröffentlicht: (2024)
von: L. M. Devin, et al.
Veröffentlicht: (2024)
Three-dimensional simulation of the cracked samples fracturing
von: I. E. Shipovskij
Veröffentlicht: (2014)
von: I. E. Shipovskij
Veröffentlicht: (2014)
Mathematical modeling of damage accumulation under conditions of creep and corrosion cracking of structural materials
von: Zhigang Liu, et al.
Veröffentlicht: (2020)
von: Zhigang Liu, et al.
Veröffentlicht: (2020)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
von: Wang, X.R., et al.
Veröffentlicht: (2018)
von: Wang, X.R., et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017) -
Formation of crystal stock in the process of the plate shape for type Ib large synthetic diamond single crystals
von: G. Gao, et al.
Veröffentlicht: (2020) -
Effect of Double-Atom Vacancy Defects on the Elastic Properties of Single-Layered Graphene Sheets
von: Wang, Z.Q., et al.
Veröffentlicht: (2017) -
Fabrication and mechanical performance of 3D woven basalt fiber composite materials
von: Lihua Lv, et al.
Veröffentlicht: (2017) -
Zakarpatskiy perlit as component of mineral woven fabric material
von: O. O. Tytova, et al.
Veröffentlicht: (2019)