Study of Composite Fiber Reinforcement of Cracked Thin-Walled Pressure Vessels Utilizing Multi-Scaling Technique Based on Extended Finite Element Method
One of the most important challenges of storing fluids in thin walled pressure vessels under internal pressure is preventing crack propagation. In low temperature, steel shows brittle crack propagation characteristic which is highly dangerous. In this paper, a new numerical model is presented in ord...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2018 |
| Hauptverfasser: | Mirmohammad, S.H., Safarabadi, M., Karimpour, M., Aliha, M.R.M., Berto, F. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/174016 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Study of Composite Fiber Reinforcement of Cracked Thin-Walled Pressure Vessels Utilizing Multi-Scaling Technique Based on Extended Finite Element Method / S.H. Mirmohammad, M. Safarabadi, M. Karimpour, M.R.M. Aliha, F. Berto // Проблемы прочности. — 2018. — № 6. — С. 118-130. — Бібліогр.: 24 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
An extended Sobolev scale over vector bundles
von: T. M. Zinchenko
Veröffentlicht: (2017)
von: T. M. Zinchenko
Veröffentlicht: (2017)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)
von: Ji, S.J., et al.
Veröffentlicht: (2015)
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
von: A. I. Burja, et al.
Veröffentlicht: (2017)
von: A. I. Burja, et al.
Veröffentlicht: (2017)
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
Load-carrying capacity of vessel shells with local wall thinning
von: V. M. Dolinskij, et al.
Veröffentlicht: (2009)
von: V. M. Dolinskij, et al.
Veröffentlicht: (2009)
Extended Sobolev Scale and Elliptic Operators
von: V. A. Mikhajlets, et al.
Veröffentlicht: (2013)
von: V. A. Mikhajlets, et al.
Veröffentlicht: (2013)
Extended Sobolev Scale and Elliptic Operators
von: Mikhailets, V. A., et al.
Veröffentlicht: (2013)
von: Mikhailets, V. A., et al.
Veröffentlicht: (2013)
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
Static strength of thin-walled vessel with dents under internal pressure
von: Ja. Kantor, et al.
Veröffentlicht: (2011)
von: Ja. Kantor, et al.
Veröffentlicht: (2011)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Spectral and deformation analysis of systems "vessels - reinforcement" of vertical shafts
von: S. R. Ilin, et al.
Veröffentlicht: (2015)
von: S. R. Ilin, et al.
Veröffentlicht: (2015)
Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
Olbia Glass Vessels Made Using Core-Formed Technique
von: A. Kolesnichenko
Veröffentlicht: (2019)
von: A. Kolesnichenko
Veröffentlicht: (2019)
Static strength of thin-walled vessel with dents under internal pressure
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)
Static strength of thin-walled vessel with dents under internal pressure
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)
Problem solution of noninvasive measuring of blood stream pressure on vessels walls
von: A. D. Bekh, et al.
Veröffentlicht: (2013)
von: A. D. Bekh, et al.
Veröffentlicht: (2013)
The Bauschinger effect in open-end thick-walled cylindrical pressure vessels
von: V. N. Bastun, et al.
Veröffentlicht: (2017)
von: V. N. Bastun, et al.
Veröffentlicht: (2017)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
von: Verma, S., et al.
Veröffentlicht: (2017)
von: Verma, S., et al.
Veröffentlicht: (2017)
Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
von: A. I. Burja, et al.
Veröffentlicht: (2015)
von: A. I. Burja, et al.
Veröffentlicht: (2015)
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)
von: Kim, J.W.
Veröffentlicht: (2016)
Advanced 3D Modeling System Utilizing Photogrammetric Techniques
von: V. V. Vdovychenko, et al.
Veröffentlicht: (2023)
von: V. V. Vdovychenko, et al.
Veröffentlicht: (2023)
Elliptic problems with nonclassical coundary conditions in an extended Sobolev scale
von: O. O. Murach, et al.
Veröffentlicht: (2020)
von: O. O. Murach, et al.
Veröffentlicht: (2020)
Regular Elliptic Boundary-Value Problems in the Extended Sobolev Scale
von: A. V. Anop, et al.
Veröffentlicht: (2014)
von: A. V. Anop, et al.
Veröffentlicht: (2014)
Elliptic systems in extended Sobolev scale on a closed manifold
von: T. N. Zinchenko
Veröffentlicht: (2014)
von: T. N. Zinchenko
Veröffentlicht: (2014)
Regular Elliptic Boundary-Value Problems in the Extended Sobolev Scale
von: Anop, A. V., et al.
Veröffentlicht: (2014)
von: Anop, A. V., et al.
Veröffentlicht: (2014)
Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
von: V. A. Dekret, et al.
Veröffentlicht: (2021)
von: V. A. Dekret, et al.
Veröffentlicht: (2021)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)
von: Bounouas, L., et al.
Veröffentlicht: (2001)
Modeling a circumferential crack in pipe area of a flat bottom of thick-walled pressure vessel
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)
Electro-Thermo-Mechanical Response of Thick-Walled Piezoelectric Cylinder Reinforced by Boron-Nitride Nanotubes
von: Ghorbanpour Arani, et al.
Veröffentlicht: (2013)
von: Ghorbanpour Arani, et al.
Veröffentlicht: (2013)
Electro-Thermo-Mechanical Response of Thick-Walled Piezoelectric Cylinder Reinforced by Boron-Nitride Nanotubes
von: Ghorbanpour Arani, A., et al.
Veröffentlicht: (2013)
von: Ghorbanpour Arani, A., et al.
Veröffentlicht: (2013)
A general elliptic boundary-value problem in the extended Sobolev scale
von: A. V. Anop
Veröffentlicht: (2014)
von: A. V. Anop
Veröffentlicht: (2014)
Elliptic B. Lawruk boundary value problems in the extended Sobolev scale
von: I. S. Chepurukhina
Veröffentlicht: (2015)
von: I. S. Chepurukhina
Veröffentlicht: (2015)
Subsurface and through-wall SAR imaging techniques for ground penetrating radar
von: M. Unal, et al.
Veröffentlicht: (2013)
von: M. Unal, et al.
Veröffentlicht: (2013)
Subsurface and through-wall SAR imaging techniques for ground penetrating radar
von: Unal, M., et al.
Veröffentlicht: (2013)
von: Unal, M., et al.
Veröffentlicht: (2013)
Account for pore formation in estimation of limiting state in the zone of pressure vessel wall thinning defect
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)
Ähnliche Einträge
-
Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017) -
Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
von: Hobiny, A.D., et al.
Veröffentlicht: (2018) -
An extended Sobolev scale over vector bundles
von: T. M. Zinchenko
Veröffentlicht: (2017) -
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015) -
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
von: A. I. Burja, et al.
Veröffentlicht: (2017)