Surface strain-hardening of the blades of gas-turbine engines in an ultrasonic field
The completed tests convincingly show that the time of strain-hardening of small blades of alloy VT8 by 1.3-mm-diam. balls should be no greater than 5 min if the edges are not protected by shields. Such strain-hardening significantly increases the endurance limits of blades with almost no reduction...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 1985 |
| Hauptverfasser: | Yatsenko, V.K., Stebel'kov, I.A., Pritchenko, V.F. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
1985
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/182867 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Surface strain-hardening of the blades of gas-turbine engines in an ultrasonic field / V.K. Yatsenko, I.A. Stebel'kov, V.F. Pritchenko // Проблемы прочности. — 1985. — № 8. — С. 1113-1117. — Бібліогр.: 3 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Stress-strain and limiting state of spoked flywheels formed from composite materials. Report 1. Computational relationships
von: Leshchenko, V.M., et al.
Veröffentlicht: (1985)
von: Leshchenko, V.M., et al.
Veröffentlicht: (1985)
Study of the stress-strain state of ribbed cylindrical shells by the finite elements method
von: Menabdishvili, P.Z, et al.
Veröffentlicht: (1985)
von: Menabdishvili, P.Z, et al.
Veröffentlicht: (1985)
Resistance to deformation and fracture of 35Kh3NM steel under conditions of shock loading
von: Gluzman, V.D., et al.
Veröffentlicht: (1985)
von: Gluzman, V.D., et al.
Veröffentlicht: (1985)
Effect of the peak temperatures and of the cooling rate on the damping properties of manganese-copper base alloys
von: Chaikovskii, B.S., et al.
Veröffentlicht: (1985)
von: Chaikovskii, B.S., et al.
Veröffentlicht: (1985)
Strength of optical glass under conditions of axial compression
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)
Use of the finite elements method to calculate the strength of conical shells with notches
von: Kabanov, V.V., et al.
Veröffentlicht: (1985)
von: Kabanov, V.V., et al.
Veröffentlicht: (1985)
Effect of decarbonization of metal on the load-carrying capacity of cylindrical pressure vessels
von: Shirshov, V.P.
Veröffentlicht: (1985)
von: Shirshov, V.P.
Veröffentlicht: (1985)
Rules of fracture development in the creep of heat-resistant steels
von: Berezina, T.G.
Veröffentlicht: (1985)
von: Berezina, T.G.
Veröffentlicht: (1985)
Effect of temperature on microplasticity and cyclic strength of alloy 1201
von: Seregin, G.V.
Veröffentlicht: (1985)
von: Seregin, G.V.
Veröffentlicht: (1985)
A mechanical model of fatigue crack propagation. Report 2
von: Karzov, G.P., et al.
Veröffentlicht: (1985)
von: Karzov, G.P., et al.
Veröffentlicht: (1985)
Effect of stress concentration on the fatigue and corrosion-fatigue properties of cast aluminum VAL10 and forced aluminum AK6 alloys
von: Karlashov, A.V., et al.
Veröffentlicht: (1985)
von: Karlashov, A.V., et al.
Veröffentlicht: (1985)
Increasing the load-carrying capacity of three-layer plates and shallow shells
von: Panteleev, A.D.
Veröffentlicht: (1985)
von: Panteleev, A.D.
Veröffentlicht: (1985)
Systems approach to problems of the design of automated test complexes. Report 2. Determination of system parameters
von: Grishko, V.G.
Veröffentlicht: (1985)
von: Grishko, V.G.
Veröffentlicht: (1985)
Change in the ductility characteristics of austenitic steels during deformation at different rates
von: Shinkarenko, E.T.
Veröffentlicht: (1985)
von: Shinkarenko, E.T.
Veröffentlicht: (1985)
Kinetics of deformation and damage accumulation in concentration zones with nonisothermal low-cycle loading
von: Kazantsev, A.G., et al.
Veröffentlicht: (1985)
von: Kazantsev, A.G., et al.
Veröffentlicht: (1985)
Integrodifferential criterion of the strength of aging polymers
von: Buryachenko, V.A., et al.
Veröffentlicht: (1985)
von: Buryachenko, V.A., et al.
Veröffentlicht: (1985)
Low-cycle fatigue and cracking resistance of power plant boiler pipes and steam lines of 12Kh1MF steel
von: Zelenskii, V.G., et al.
Veröffentlicht: (1985)
von: Zelenskii, V.G., et al.
Veröffentlicht: (1985)
A mechanical model of fatigue crack propagation. Report 1
von: Karzov, G.P., et al.
Veröffentlicht: (1985)
von: Karzov, G.P., et al.
Veröffentlicht: (1985)
Contact fatigue in low-cycle loading of Wc-Co hard alloys for metal working
von: Fal'kovskii, V.A., et al.
Veröffentlicht: (1985)
von: Fal'kovskii, V.A., et al.
Veröffentlicht: (1985)
Examination of the cracking resistance of corrosionresisting glass-reinforced plastics by acoustic emission methods
von: Naumets, V.N., et al.
Veröffentlicht: (1985)
von: Naumets, V.N., et al.
Veröffentlicht: (1985)
The analysis of the damage blades of gas-turbine engines
von: Ju. S. Nalimov
Veröffentlicht: (2014)
von: Ju. S. Nalimov
Veröffentlicht: (2014)
Hardening of leading edges of turbine blades by electrospark alloying
von: Kalinina, N.E., et al.
Veröffentlicht: (2019)
von: Kalinina, N.E., et al.
Veröffentlicht: (2019)
Improvement of heat-resistance of the coating for gas-turbine engine blades
von: S. G. Rudenkij, et al.
Veröffentlicht: (2019)
von: S. G. Rudenkij, et al.
Veröffentlicht: (2019)
Structural-mechanical properties of nickel alloy of gas turbine engine blades
von: Yu. H. Kvasnytska, et al.
Veröffentlicht: (2021)
von: Yu. H. Kvasnytska, et al.
Veröffentlicht: (2021)
Improving the performance of working blades of modern industrial gas turbine engines
von: Ju. G. Kvasnitskaja
Veröffentlicht: (2015)
von: Ju. G. Kvasnitskaja
Veröffentlicht: (2015)
Numerical Analysis of Working Processes in the Blade Channels of the Highly-Loaded Turbine of a Marine Gas Turbine Engine, Using a Refined Finite Element Model
von: Morhun, Serhii O.
Veröffentlicht: (2019)
von: Morhun, Serhii O.
Veröffentlicht: (2019)
Numerical Analysis of Working Processes in the Blade Channels of the Highly-Loaded Turbine of a Marine Gas Turbine Engine, Using a Refined Finite Element Model
von: Morhun, Serhii O.
Veröffentlicht: (2019)
von: Morhun, Serhii O.
Veröffentlicht: (2019)
The stress-strain state of the lock joint of the operating blades of the turbine
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
The stress-strain state of the lock joint of the operating blades of the turbine
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
The stress-strain state of the lock joint of the operating blades of the turbine
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2013)
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2013)
Measurement of temperature of molten zone at the directional crystallization of blades of the gas-turbine engine
von: M. O. Markin, et al.
Veröffentlicht: (2017)
von: M. O. Markin, et al.
Veröffentlicht: (2017)
Measurement of temperature of molten zone at the directional crystallization of blades of the gas-turbine engine
von: Markin, M.O., et al.
Veröffentlicht: (2017)
von: Markin, M.O., et al.
Veröffentlicht: (2017)
Testing of gas-turbine blades engines using the accelerator of high current relativistic electrons
von: Ye. Donets, et al.
Veröffentlicht: (2020)
von: Ye. Donets, et al.
Veröffentlicht: (2020)
Investigations of the structural features of a high-temperature nickel alloy for gas turbine engine blades
von: Yu. H. Kvasnytska, et al.
Veröffentlicht: (2023)
von: Yu. H. Kvasnytska, et al.
Veröffentlicht: (2023)
Application of radiation processes for testing of gas turbine blades
von: Bazaleev, M.I., et al.
Veröffentlicht: (2019)
von: Bazaleev, M.I., et al.
Veröffentlicht: (2019)
Fatigue fracture of gas turbine engine blades made of a new heat-resistant nickel alloy
von: O. I. Balytskyi, et al.
Veröffentlicht: (2021)
von: O. I. Balytskyi, et al.
Veröffentlicht: (2021)
The role of stress–strain state of gas turbine engine metal parts in predicting their safe life
von: Z. A. Duriagina, et al.
Veröffentlicht: (2021)
von: Z. A. Duriagina, et al.
Veröffentlicht: (2021)
Strain hardening of titanium alloys doped
von: A. V. Kotko
Veröffentlicht: (2013)
von: A. V. Kotko
Veröffentlicht: (2013)
Development of the technology for microplasma powder cladding of flange platform faces of blades of highpressure turbine aircraft engine
von: K. A. Jushchenko, et al.
Veröffentlicht: (2010)
von: K. A. Jushchenko, et al.
Veröffentlicht: (2010)
Numerical Analysis of Working Processes in the Blade Channels of the Highly-Loaded Turbine of a Marine Gas Turbine Engine, Using a Refined Finite Element Model
von: S. O. Morhun
Veröffentlicht: (2019)
von: S. O. Morhun
Veröffentlicht: (2019)
Ähnliche Einträge
-
Stress-strain and limiting state of spoked flywheels formed from composite materials. Report 1. Computational relationships
von: Leshchenko, V.M., et al.
Veröffentlicht: (1985) -
Study of the stress-strain state of ribbed cylindrical shells by the finite elements method
von: Menabdishvili, P.Z, et al.
Veröffentlicht: (1985) -
Resistance to deformation and fracture of 35Kh3NM steel under conditions of shock loading
von: Gluzman, V.D., et al.
Veröffentlicht: (1985) -
Effect of the peak temperatures and of the cooling rate on the damping properties of manganese-copper base alloys
von: Chaikovskii, B.S., et al.
Veröffentlicht: (1985) -
Strength of optical glass under conditions of axial compression
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)