Buchumschlag

Use of the finite elements method to calculate the strength of conical shells with notches

The present study determines the moment stress--strain state of conical shells with notches of arbitrary size and form under complex loading. The problem is solved by the finite elements method in displacements.

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	1985
Hauptverfasser:	Kabanov, V.V., Zheleznov, L.P.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 1985
Schlagworte:	Scientific-technical section
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/182896
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Use of the finite elements method to calculate the strength of conical shells with notches / V.V. Kabanov, L.P. Zheleznov // Проблемы прочности. — 1985. — № 8. — С. 1169-1174. — Бібліогр.: 4 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Study of the stress-strain state of ribbed cylindrical shells by the finite elements method
von: Menabdishvili, P.Z, et al.
Veröffentlicht: (1985)

Integrodifferential criterion of the strength of aging polymers
von: Buryachenko, V.A., et al.
Veröffentlicht: (1985)

Strength of optical glass under conditions of axial compression
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)

Effect of temperature on microplasticity and cyclic strength of alloy 1201
von: Seregin, G.V.
Veröffentlicht: (1985)

Increasing the load-carrying capacity of three-layer plates and shallow shells
von: Panteleev, A.D.
Veröffentlicht: (1985)

Examination of the cracking resistance of corrosionresisting glass-reinforced plastics by acoustic emission methods
von: Naumets, V.N., et al.
Veröffentlicht: (1985)

Effect of the peak temperatures and of the cooling rate on the damping properties of manganese-copper base alloys
von: Chaikovskii, B.S., et al.
Veröffentlicht: (1985)

Effect of decarbonization of metal on the load-carrying capacity of cylindrical pressure vessels
von: Shirshov, V.P.
Veröffentlicht: (1985)

Rules of fracture development in the creep of heat-resistant steels
von: Berezina, T.G.
Veröffentlicht: (1985)

Resistance to deformation and fracture of 35Kh3NM steel under conditions of shock loading
von: Gluzman, V.D., et al.
Veröffentlicht: (1985)

Stress-strain and limiting state of spoked flywheels formed from composite materials. Report 1. Computational relationships
von: Leshchenko, V.M., et al.
Veröffentlicht: (1985)

A mechanical model of fatigue crack propagation. Report 2
von: Karzov, G.P., et al.
Veröffentlicht: (1985)

Surface strain-hardening of the blades of gas-turbine engines in an ultrasonic field
von: Yatsenko, V.K., et al.
Veröffentlicht: (1985)

Effect of stress concentration on the fatigue and corrosion-fatigue properties of cast aluminum VAL10 and forced aluminum AK6 alloys
von: Karlashov, A.V., et al.
Veröffentlicht: (1985)

Systems approach to problems of the design of automated test complexes. Report 2. Determination of system parameters
von: Grishko, V.G.
Veröffentlicht: (1985)

Change in the ductility characteristics of austenitic steels during deformation at different rates
von: Shinkarenko, E.T.
Veröffentlicht: (1985)

Kinetics of deformation and damage accumulation in concentration zones with nonisothermal low-cycle loading
von: Kazantsev, A.G., et al.
Veröffentlicht: (1985)

Low-cycle fatigue and cracking resistance of power plant boiler pipes and steam lines of 12Kh1MF steel
von: Zelenskii, V.G., et al.
Veröffentlicht: (1985)

A mechanical model of fatigue crack propagation. Report 1
von: Karzov, G.P., et al.
Veröffentlicht: (1985)

Contact fatigue in low-cycle loading of Wc-Co hard alloys for metal working
von: Fal'kovskii, V.A., et al.
Veröffentlicht: (1985)

Joint finite elements with vector approximation of unknowns for the calculation of thin shells of complex geometry
von: Ye. A. Storozhuk
Veröffentlicht: (2020)

The method of calculating compressive strength of the truncated conical rock samples at a constant contact shear stress
von: D. L. Vasilev, et al.
Veröffentlicht: (2013)

Vibrations of Layered Conical Shell under Nonstationary Loading
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2022)

Axially symmetric vibrations of a complete conical shell
von: V. A. Trotsenko, et al.
Veröffentlicht: (2020)

Using conical regularization in calculating Lagrangian estimates in quadratic optimization problems
von: Ju. P. Laptin, et al.
Veröffentlicht: (2017)

Application of integrative information technology in the evaluation processes of research institutions
von: Nesterenko, Oleksandr V., et al.
Veröffentlicht: (2024)

Low bound on a magnetic field strength in the hot universe
von: Elizalde, E., et al.
Veröffentlicht: (2012)

Some aspects regarding the quality of the accounting infirmation and its users
von: Dochev, M.
Veröffentlicht: (2010)

6-Hour Work Day Instead of Usual 8: Feasibility (or Benefits) of Implementation for Ukrainian Enterprises
von: Vorontsov, M., et al.
Veröffentlicht: (2019)

The Ukrainian-Polish Seminars
von: Liashenko, V., et al.
Veröffentlicht: (2019)

Locally Imperfect Conical Shells under Uniform External Pressure
von: Ghanbari Ghazijahani, T., et al.
Veröffentlicht: (2013)

Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)

Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: K. V. Avramov, et al.
Veröffentlicht: (2014)

Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)

Determination of natural frequencies of an elliptic shell of constant thickness by the finite element method
von: V. D. Budak, et al.
Veröffentlicht: (2014)

Calculation of geometric parameters of a magnetic quadrupole lens working near to saturation
von: Mytsykov, A.O.
Veröffentlicht: (2000)

Finite-element solution of the problems of the theory of shells amenable to shear and compression
von: Ye. Bernakevych, et al.
Veröffentlicht: (2018)

Symbol calculations the approximate integrals of motion for Hamiltonian systems with N degrees of freedom
von: Bogachev, V.E., et al.
Veröffentlicht: (2012)

Leakage Inductance Calculation of High-Voltage Transformer Windings by Means of the Software using the Finite Elements Method
von: V. O. Brzhezytskyi, et al.
Veröffentlicht: (2014)

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)