Incremental digital quasi-ideal integrator application for advance flux estimation of controled induction machine
The performance of the speed controlled induction machine principally depends on the accuracy of the estimated flux. The proposed method compensates the error produced by the inherent problem in the “pure” integrator and measurement error. This paper describes the problem associated with a quasi-ide...
Gespeichert in:
| Veröffentlicht in: | Математичне та комп'ютерне моделювання. Серія: Фізико-математичні науки |
|---|---|
| Datum: | 2008 |
| Hauptverfasser: | Ustun, O., Ali-Zade, P., Mamedov, G., Radjabli, Kiamran |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут кібернетики ім. В.М. Глушкова НАН України
2008
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/18690 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Incremental digital quasi-ideal integrator application for advance flux estimation of controled induction machine / O. Ustun, P. Ali-Zade, G. Mamedov, Radjabli Kiamran // Математичне та комп'ютерне моделювання. Серія: Технічні науки: зб. наук. пр. — Кам’янець-Подільський: Кам'янець-Подільськ. нац. ун-т, 2008. — Вип. 1. — С. 174-187. — Бібліогр.: 22 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
ІНКРЕМЕНТНИЙ ЦИФРОВИЙ КВАЗІІДЕАЛ ІНТЕГРАТОР ЗАЯВКИ ПОПЕРЕДНЬОГО ПОТОКУ ОЦІНКИ КЕРУЮЧОЇ ІНДУКЦІЙНОЇ МАШИНИ
von: Ustun, O., et al.
Veröffentlicht: (2008)
von: Ustun, O., et al.
Veröffentlicht: (2008)
Computer-assisted Electrodynamic Modeling System for Oil and Gas Industry Electric Drives Study
von: Ustun, O., et al.
Veröffentlicht: (2008)
von: Ustun, O., et al.
Veröffentlicht: (2008)
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)
von: Tran, C. D., et al.
Veröffentlicht: (2025)
Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)
Principal quasi-ideals of cohomological dimension 1
von: Novikov, B.V.
Veröffentlicht: (2003)
von: Novikov, B.V.
Veröffentlicht: (2003)
Invariance of rotor flux observers in direct field-oriented control of induction motors
von: S. M. Peresada, et al.
Veröffentlicht: (2014)
von: S. M. Peresada, et al.
Veröffentlicht: (2014)
General theoretical solution of sensorless speed-flux vector control of induction motor
von: S. M. Peresada, et al.
Veröffentlicht: (2016)
von: S. M. Peresada, et al.
Veröffentlicht: (2016)
On prime, quasi-prime and differentially prime ideals of dmsp-semirings
von: I. O. Melnyk
Veröffentlicht: (2021)
von: I. O. Melnyk
Veröffentlicht: (2021)
Control of Doubly-fed Induction Machine in Excitation and Synchronization Modes
von: S. M. Peresada, et al.
Veröffentlicht: (2016)
von: S. M. Peresada, et al.
Veröffentlicht: (2016)
Simulation of induction machines with common solid rotor
von: M. Zablodskiy, et al.
Veröffentlicht: (2018)
von: M. Zablodskiy, et al.
Veröffentlicht: (2018)
Control Method in Cognitive Maps Based on Weights Increments
von: V. D. Romanenko, et al.
Veröffentlicht: (2016)
von: V. D. Romanenko, et al.
Veröffentlicht: (2016)
Control Method in Cognitive Maps Based on Weights Increments
von: Romanenko, V.D., et al.
Veröffentlicht: (2016)
von: Romanenko, V.D., et al.
Veröffentlicht: (2016)
Quasi-valuation maps based on positive implicative ideals in BCK-algebras
von: Jun, Young Bae, et al.
Veröffentlicht: (2018)
von: Jun, Young Bae, et al.
Veröffentlicht: (2018)
Quasi-valuation maps based on positive implicative ideals in BCK-algebras
von: Young Bae Jun, et al.
Veröffentlicht: (2018)
von: Young Bae Jun, et al.
Veröffentlicht: (2018)
Flux observer adaptive to induction motors active rotor resistance variations
von: S. M. Peresada, et al.
Veröffentlicht: (2022)
von: S. M. Peresada, et al.
Veröffentlicht: (2022)
Quasi-frequency induction electric drive control of scraper and screw conveyors in transient modes
von: M. M. Zablodskyi, et al.
Veröffentlicht: (2019)
von: M. M. Zablodskyi, et al.
Veröffentlicht: (2019)
Pasting of two processes with independent increments
von: Kirichinskaya, I. B., et al.
Veröffentlicht: (1993)
von: Kirichinskaya, I. B., et al.
Veröffentlicht: (1993)
Speed control of the doubly-fed induction machine with controlled converters in the stator and rotor circuits
von: I. A. Shapoval, et al.
Veröffentlicht: (2017)
von: I. A. Shapoval, et al.
Veröffentlicht: (2017)
Approximation envelopes of quasi-sinusoidal digital-analog signals
von: O. L. Karasinskyi, et al.
Veröffentlicht: (2022)
von: O. L. Karasinskyi, et al.
Veröffentlicht: (2022)
On the localization of quasi-Lamb waves in the layer of ideal fluid – elastic layer system
von: A. M. Bagno
Veröffentlicht: (2016)
von: A. M. Bagno
Veröffentlicht: (2016)
Speed control of a matrix converter excited doubly-fed induction machine
von: Shapoval, I.A., et al.
Veröffentlicht: (2011)
von: Shapoval, I.A., et al.
Veröffentlicht: (2011)
Robust fault-tolerant sliding mode control and advanced fault diagnosis for doubly-fed induction generators
von: Hamdi, N., et al.
Veröffentlicht: (2025)
von: Hamdi, N., et al.
Veröffentlicht: (2025)
Multiphysics modeling of the induction heating and melting of conductive workpieces with magnetic flux concentrator
von: A. D. Podoltsev, et al.
Veröffentlicht: (2015)
von: A. D. Podoltsev, et al.
Veröffentlicht: (2015)
Algorithm of Flux Reference Forming for Vector Controled Induction Motor in Field Weakening Region for Traction Applications
von: A. B. Voronko
Veröffentlicht: (2014)
von: A. B. Voronko
Veröffentlicht: (2014)
$S$-weakly prime ideals in noncommutative rings
von: Çay, Hatice, et al.
Veröffentlicht: (2026)
von: Çay, Hatice, et al.
Veröffentlicht: (2026)
Fault-tolerant control of a double star induction machine operating in active redundancy
von: Guizani, S., et al.
Veröffentlicht: (2025)
von: Guizani, S., et al.
Veröffentlicht: (2025)
The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
von: Планковский, С. И., et al.
Veröffentlicht: (2016)
von: Планковский, С. И., et al.
Veröffentlicht: (2016)
The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
von: Планковский, С. И., et al.
Veröffentlicht: (2016)
von: Планковский, С. И., et al.
Veröffentlicht: (2016)
Electric machine with axial magnetic flux, permanent magnets and multilayered printing windings
von: V. V. Grebenikov, et al.
Veröffentlicht: (2020)
von: V. V. Grebenikov, et al.
Veröffentlicht: (2020)
The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
von: S. I. Plankovskij, et al.
Veröffentlicht: (2011)
von: S. I. Plankovskij, et al.
Veröffentlicht: (2011)
Minimax filtering of sequences with periodically stationary increments
von: M. M. Luz, et al.
Veröffentlicht: (2022)
von: M. M. Luz, et al.
Veröffentlicht: (2022)
Reconstruction of images with large non-uniform increments
von: S. I. Melnik, et al.
Veröffentlicht: (2016)
von: S. I. Melnik, et al.
Veröffentlicht: (2016)
Diagnostics of the Effectiveness of Development of the Machine-Building Quasi-Integration Structures in Ukraine
von: Zh. M. Zhyhalkevych
Veröffentlicht: (2020)
von: Zh. M. Zhyhalkevych
Veröffentlicht: (2020)
Observer-based speed estimation for vector controlled induction motors
von: S. Peresada, et al.
Veröffentlicht: (2022)
von: S. Peresada, et al.
Veröffentlicht: (2022)
Herstein's theorem for prime ideals of semirings with involution
von: Ali, Liaqat, et al.
Veröffentlicht: (2026)
von: Ali, Liaqat, et al.
Veröffentlicht: (2026)
Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
von: Chaabane, H., et al.
Veröffentlicht: (2022)
von: Chaabane, H., et al.
Veröffentlicht: (2022)
Mathematical model of a two-machine induction motor with rotating inductor
von: V. V. Lutso, et al.
Veröffentlicht: (2019)
von: V. V. Lutso, et al.
Veröffentlicht: (2019)
Further results on the regulation problem for linear systems with constraints on control and its increment
von: A. Abdelhak, et al.
Veröffentlicht: (2023)
von: A. Abdelhak, et al.
Veröffentlicht: (2023)
Conditions of Minimal Increment of Entropy in Equivalent Carnot Cycles
von: V. P. Bondar
Veröffentlicht: (2015)
von: V. P. Bondar
Veröffentlicht: (2015)
Potential Method in the Limit Problems for the Processes with Independent Increments
von: M. S. Bratiichuk
Veröffentlicht: (2015)
von: M. S. Bratiichuk
Veröffentlicht: (2015)
Ähnliche Einträge
-
ІНКРЕМЕНТНИЙ ЦИФРОВИЙ КВАЗІІДЕАЛ ІНТЕГРАТОР ЗАЯВКИ ПОПЕРЕДНЬОГО ПОТОКУ ОЦІНКИ КЕРУЮЧОЇ ІНДУКЦІЙНОЇ МАШИНИ
von: Ustun, O., et al.
Veröffentlicht: (2008) -
Computer-assisted Electrodynamic Modeling System for Oil and Gas Industry Electric Drives Study
von: Ustun, O., et al.
Veröffentlicht: (2008) -
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025) -
Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023) -
Principal quasi-ideals of cohomological dimension 1
von: Novikov, B.V.
Veröffentlicht: (2003)