Design on Key Parameters of Double Damper System for Hydraulic Rock Drill
The lack of researches on the double damper system seriously restricted the impact power’s increase of hydraulic rock drills. The structure and working principle of the double damper system are described. The key parameters such as the unloading damping pressure, damping flow, equilibrium position o...
Gespeichert in:
| Veröffentlicht in: | Прикладная механика |
|---|---|
| Datum: | 2019 |
| Hauptverfasser: | Geng, X., Ma, W., Ma, F., Tian, X. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут механіки ім. С.П. Тимошенка НАН України
2019
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/188199 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Design on Key Parameters of Double Damper System for Hydraulic Rock Drill / X. Geng, W. Ma, F. Ma, X. Tian // Прикладная механика. — 2019. — Т.55, № 6. — С. 135-141. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Design on Key Parameters of Double Damper System for Hydraulic Rock Drill
von: X. Geng, et al.
Veröffentlicht: (2019)
von: X. Geng, et al.
Veröffentlicht: (2019)
IMPACT OF A HYDRAULIC DAMPER ON TWO-POSITION POLARIZED ACTUATOR DYNAMICS
von: Baida, E. I.
Veröffentlicht: (2013)
von: Baida, E. I.
Veröffentlicht: (2013)
Substantiation of method for calculating design parameters of horizontal hydraulic classifier
von: Franchuk, V.P., et al.
Veröffentlicht: (2017)
von: Franchuk, V.P., et al.
Veröffentlicht: (2017)
Substantiation of method for calculating design parameters of horizontal hydraulic classifier
von: V. P. Franchuk, et al.
Veröffentlicht: (2017)
von: V. P. Franchuk, et al.
Veröffentlicht: (2017)
Determination of optimal parameters for dynamic low-frequency oscillation dampers
von: E. S. Lapshin, et al.
Veröffentlicht: (2018)
von: E. S. Lapshin, et al.
Veröffentlicht: (2018)
Optimization of designing on cutter parameters of PCD saw blades by simulation analysis
von: X. Yang, et al.
Veröffentlicht: (2019)
von: X. Yang, et al.
Veröffentlicht: (2019)
Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
von: B. C. Liu, et al.
Veröffentlicht: (2017)
von: B. C. Liu, et al.
Veröffentlicht: (2017)
Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
von: Liu, B.C., et al.
Veröffentlicht: (2017)
von: Liu, B.C., et al.
Veröffentlicht: (2017)
Method for determining the rational parameters of dynamic dampers of low-frequency vibrations
von: Ye. S. Lapshyn, et al.
Veröffentlicht: (2019)
von: Ye. S. Lapshyn, et al.
Veröffentlicht: (2019)
Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)
von: Wei, Y.F., et al.
Veröffentlicht: (2015)
The efficiency of destruction of rocks during drilling with pulse washing
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)
Finding ways to improve productivity drilling wells in strong rocks
von: S. P. Minieiev, et al.
Veröffentlicht: (2022)
von: S. P. Minieiev, et al.
Veröffentlicht: (2022)
Computer-aided Design of Centrifugal Pump Hydraulics
von: Косторной, А. С.
Veröffentlicht: (2015)
von: Косторной, А. С.
Veröffentlicht: (2015)
Computer-aided Design of Centrifugal Pump Hydraulics
von: Косторной, А. С.
Veröffentlicht: (2015)
von: Косторной, А. С.
Veröffentlicht: (2015)
Computer-aided Design of Centrifugal Pump Hydraulics
von: A. S. Kostornoj
Veröffentlicht: (2015)
von: A. S. Kostornoj
Veröffentlicht: (2015)
Drilling of the sidelong shaft of the well 308-dolyna using double-inhibited low-clay emulsion drilling fluid
von: Ya. S. Kotskulych, et al.
Veröffentlicht: (2016)
von: Ya. S. Kotskulych, et al.
Veröffentlicht: (2016)
Mechanics of effective destruction of rocks by chain-drilling bits rollingcutter
von: O. M. Davydenko, et al.
Veröffentlicht: (2019)
von: O. M. Davydenko, et al.
Veröffentlicht: (2019)
Drilling carbide rock cutting tool of a new type
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)
Justification of the parameters of rotary-vibration drilling of small-diameter boreholes in rocks based on a submersible cavitation hydrovibrator
von: S. P. Minieiev, et al.
Veröffentlicht: (2022)
von: S. P. Minieiev, et al.
Veröffentlicht: (2022)
Implementation of the rock thermal cyclic weakening in the diamond drill bits with an elastic console
von: V. F. Gankevich, et al.
Veröffentlicht: (2018)
von: V. F. Gankevich, et al.
Veröffentlicht: (2018)
Effective rock cutting tool for drilling small diameter for oil and gas
von: Ju. E. Budjukov, et al.
Veröffentlicht: (2016)
von: Ju. E. Budjukov, et al.
Veröffentlicht: (2016)
Decision-Making in Choosing Drill Bits and Drilling Operational Parameters Based on Initial Data
von: G. M. Efendiev, et al.
Veröffentlicht: (2016)
von: G. M. Efendiev, et al.
Veröffentlicht: (2016)
Factors of influence of coal hydraulic treatment on unlouding of the face area in the rocks
von: Ju. E. Poljakov, et al.
Veröffentlicht: (2016)
von: Ju. E. Poljakov, et al.
Veröffentlicht: (2016)
Determination of hydraulic parameters for geothermal heat exchanger
von: Chepak, O.P., et al.
Veröffentlicht: (2018)
von: Chepak, O.P., et al.
Veröffentlicht: (2018)
Determination of hydraulic parameters for geothermal heat exchanger
von: O. P. Chepak, et al.
Veröffentlicht: (2018)
von: O. P. Chepak, et al.
Veröffentlicht: (2018)
Influence of durability of synthetic diamonds on efficiency of destruction of mountain rock drill bits
von: A. M. Isonkin
Veröffentlicht: (2016)
von: A. M. Isonkin
Veröffentlicht: (2016)
Impact of surfactants on the process of hydraulic action on the coal seam in conditions of the rock loosening
von: C. P. Mineev, et al.
Veröffentlicht: (2014)
von: C. P. Mineev, et al.
Veröffentlicht: (2014)
Algebro-Geometric Solutions to a New Hierarchy of Soliton Equations
von: Wang, H., et al.
Veröffentlicht: (2015)
von: Wang, H., et al.
Veröffentlicht: (2015)
Algebro-Geometric Solutions to a New Hierarchy of Soliton Equations
von: H. Wang, et al.
Veröffentlicht: (2015)
von: H. Wang, et al.
Veröffentlicht: (2015)
The mineral katagenesis and deformations as the key factors impacting on the rock geomechanical properties
von: L. F. Mametova
Veröffentlicht: (2016)
von: L. F. Mametova
Veröffentlicht: (2016)
Influence of regime and operational factors on the damper system of the salient-pole synchronous machine rotor
von: Yu. M. Vaskovskyi, et al.
Veröffentlicht: (2021)
von: Yu. M. Vaskovskyi, et al.
Veröffentlicht: (2021)
Research of technological parameters of blasthole drilling with cutter drilling bits which have pins of different regidity
von: V. G. Synkov, et al.
Veröffentlicht: (2016)
von: V. G. Synkov, et al.
Veröffentlicht: (2016)
Key parameters of commercial silicon solar cells with rear metallization
von: Sachenko, A.V., et al.
Veröffentlicht: (2019)
von: Sachenko, A.V., et al.
Veröffentlicht: (2019)
Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel
von: Chen, Y.X., et al.
Veröffentlicht: (2015)
von: Chen, Y.X., et al.
Veröffentlicht: (2015)
Efficiency of the use of diamond drilling bits with a different intensity of the destruction of the mountain rocks
von: A. M. Isonkin
Veröffentlicht: (2017)
von: A. M. Isonkin
Veröffentlicht: (2017)
Interaction of the istrument with the rock bottom of the well when drilling with continuous and pulsed frequency of rotation
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)
Mechanism of filtration processes in the rocks at applying hydraulic shock on the column of liquid injected into the stratum
von: S. P. Mineev, et al.
Veröffentlicht: (2014)
von: S. P. Mineev, et al.
Veröffentlicht: (2014)
The method of evaluating the stress state of rock mass by determining the direction and shape of hydraulic fractures
von: L. I. Pimonenko, et al.
Veröffentlicht: (2015)
von: L. I. Pimonenko, et al.
Veröffentlicht: (2015)
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
von: B. F. Zaytsev, et al.
Veröffentlicht: (2018)
von: B. F. Zaytsev, et al.
Veröffentlicht: (2018)
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
von: Zaytsev, B.F., et al.
Veröffentlicht: (2018)
von: Zaytsev, B.F., et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Design on Key Parameters of Double Damper System for Hydraulic Rock Drill
von: X. Geng, et al.
Veröffentlicht: (2019) -
IMPACT OF A HYDRAULIC DAMPER ON TWO-POSITION POLARIZED ACTUATOR DYNAMICS
von: Baida, E. I.
Veröffentlicht: (2013) -
Substantiation of method for calculating design parameters of horizontal hydraulic classifier
von: Franchuk, V.P., et al.
Veröffentlicht: (2017) -
Substantiation of method for calculating design parameters of horizontal hydraulic classifier
von: V. P. Franchuk, et al.
Veröffentlicht: (2017) -
Determination of optimal parameters for dynamic low-frequency oscillation dampers
von: E. S. Lapshin, et al.
Veröffentlicht: (2018)