Construction and Verification of the Constitutive Model of Pure Copper Deformation at Elevated Temperatures
The deformation behavior of pure copper was studied in hot compression tests in the temperature range of 773–1173 K and strain rate interval of 0.001–1.0 s⁻¹, the corresponding flow stress curves were plotted. The new method to calculate critical and saturation stresses was devised, quantitative ana...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2019 |
| Main Authors: | Huang, S.H., Wu, Y., Zhao, Z.D., Xia, X.S. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2019
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/188310 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Construction and Verification of the Constitutive Model of Pure Copper Deformation at Elevated Temperatures / S.H. Huang, Y. Wu, Z.D. Zhao, X.S. Xia // Проблеми міцності. — 2019. — № 1. — С. 127-136. — Бібліогр.: 16 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Electron Backscatter Diffraction Analysis of the Microstructure Fineness in Pure Copper under Torsional Deformation
by: Wang, C.P., et al.
Published: (2018)
by: Wang, C.P., et al.
Published: (2018)
Thermodynamic verification of constitutive equations for a nonlinear anisotropic body
by: E. E. Kurchakov
Published: (2015)
by: E. E. Kurchakov
Published: (2015)
The effect of plastic deformation on the behavior of low-temperature minimum of thermopower of copper
by: V. N. Svetlov
Published: (2012)
by: V. N. Svetlov
Published: (2012)
Surface impedance of copper MOB depending on the annealing temperature and deformation degree
by: Kutovoj, V.A., et al.
Published: (2006)
by: Kutovoj, V.A., et al.
Published: (2006)
Concerning problematic character of statistical verification of theoretical constructs
by: S. Dembitskij
Published: (2014)
by: S. Dembitskij
Published: (2014)
Concerning problematic character of statistical verification of theoretical constructs
by: S. Dembitskyi
Published: (2014)
by: S. Dembitskyi
Published: (2014)
Unstable plastic deformation of ultrafine-grained copper at temperature of 0.5 K
by: N. V. Isaev, et al.
Published: (2017)
by: N. V. Isaev, et al.
Published: (2017)
Cementation of boron-containing liquid radioactive waste at elevated temperature
by: Yu. O. Olkhovyk, et al.
Published: (2019)
by: Yu. O. Olkhovyk, et al.
Published: (2019)
Absorption–desorption of carbon dioxide in carbon honeycombs at elevated temperatures
by: N. V. Krainyukova, et al.
Published: (2019)
by: N. V. Krainyukova, et al.
Published: (2019)
The influence of intensive plastic deformation on thermopower low-temperature peak and resistivity of polycrystalline copper
by: V. N. Svetlov, et al.
Published: (2012)
by: V. N. Svetlov, et al.
Published: (2012)
Dynamic Testing of Reinforced Glass Fibre-Epoxy Composite at Elevated Temperatures
by: Gieleta, R., et al.
Published: (2002)
by: Gieleta, R., et al.
Published: (2002)
Superplastic behavior of 1933 aluminum alloy with bimodal structure at elevated temperatures
by: Bryukhovetsky, V.V., et al.
Published: (2018)
by: Bryukhovetsky, V.V., et al.
Published: (2018)
Shape Memory Effect Driven by Diffusionless and Diffusional Transformations at Elevated Temperatures
by: Firstov, G.S., et al.
Published: (2002)
by: Firstov, G.S., et al.
Published: (2002)
The Hybrid Model of the Severe-Plastic-Deformation-Induced Anomalous Temperature Dependence of Shear Modulus for Copper
by: N. V. Tokii, et al.
Published: (2014)
by: N. V. Tokii, et al.
Published: (2014)
The plastic deformation mechanisms of ultra fine-grained copper at temperatures 4.2–300 K
by: N. V. Isaev, et al.
Published: (2016)
by: N. V. Isaev, et al.
Published: (2016)
Modeling and assessing of steel strength for turbogenerators under complex loading and at elevated temperatures
by: Ya. L. Ivanytskyi, et al.
Published: (2021)
by: Ya. L. Ivanytskyi, et al.
Published: (2021)
Constructing Compact Tests for Functional Verification of VHDL Descriptions of the Finite State Machines
by: P. N. Bibilo, et al.
Published: (2017)
by: P. N. Bibilo, et al.
Published: (2017)
Peculiarities of the development of hydrogels based on chitosan and poly(ethylene glycol) disuccinate at elevated temperature
by: Yu. Zholobko, et al.
Published: (2014)
by: Yu. Zholobko, et al.
Published: (2014)
Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation
by: Tang, C., et al.
Published: (2017)
by: Tang, C., et al.
Published: (2017)
Influence of micron WC addition on the microstructure and mechanical properties of ultrafine WC–Co cemented carbides at the elevated temperature
by: C. Liu, et al.
Published: (2018)
by: C. Liu, et al.
Published: (2018)
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
by: Arsić, D., et al.
Published: (2016)
by: Arsić, D., et al.
Published: (2016)
Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures
by: A. P. Zhudra
Published: (2014)
by: A. P. Zhudra
Published: (2014)
Gas-abrasive wear resis-tance at elevated temperatures of coatings produced using arc metallization
by: V. I. Pokhmurskij, et al.
Published: (2013)
by: V. I. Pokhmurskij, et al.
Published: (2013)
Comparative analysis of thermoelectric and compression heat pumps for individual air conditioners at elevated ambient temperatures
by: L. I. Anatychuk, et al.
Published: (2016)
by: L. I. Anatychuk, et al.
Published: (2016)
Corrosion and hydrogenation of 09H2S steel in hydrogen sulphide environments at elevated temperatures and pressures.
by: M. S. Khoma, et al.
Published: (2015)
by: M. S. Khoma, et al.
Published: (2015)
Low-temperature thermal expansion of pure and inert gas-doped fullerite C₆₀
by: Aleksandrovskii, A.N., et al.
Published: (2003)
by: Aleksandrovskii, A.N., et al.
Published: (2003)
Deformation behavior of vacuum condensates of copper and nickel in nanostructured state
by: A. I. Ustinov, et al.
Published: (2016)
by: A. I. Ustinov, et al.
Published: (2016)
Using of numerical modeling for verification of the functional hypothesis
by: Sokolovsky, A.I., et al.
Published: (2007)
by: Sokolovsky, A.I., et al.
Published: (2007)
High pure zirconium
by: Pylypenko, M.M.
Published: (2018)
by: Pylypenko, M.M.
Published: (2018)
High pure zirconium
by: Pylypenko, M.M.
Published: (2017)
by: Pylypenko, M.M.
Published: (2017)
Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
by: Martynenko, V. G., et al.
Published: (2018)
by: Martynenko, V. G., et al.
Published: (2018)
Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
by: Martynenko, V. G., et al.
Published: (2018)
by: Martynenko, V. G., et al.
Published: (2018)
Hammett acidity function for mixed ZrO2 – SiO2 oxide at elevated temperatures
by: E. I. Inshina, et al.
Published: (2012)
by: E. I. Inshina, et al.
Published: (2012)
Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
by: V. G. Martynenko, et al.
Published: (2018)
by: V. G. Martynenko, et al.
Published: (2018)
The charge trapping/emission processes in silicon nanocrystalline nonvolatile memory assisted by electric field and elevated temperatures
by: V. A. Ievtukh, et al.
Published: (2016)
by: V. A. Ievtukh, et al.
Published: (2016)
The charge trapping/emission processes in silicon nanocrystalline nonvolatile memory assisted by electric field and elevated temperatures
by: Ievtukh, V.A., et al.
Published: (2016)
by: Ievtukh, V.A., et al.
Published: (2016)
Satisfiability For Symbolic Verification in VRS
by: A. Letichevsky, et al.
Published: (2013)
by: A. Letichevsky, et al.
Published: (2013)
Satisfiability For Symbolic Verification in VRS
by: Letichevsky, A., et al.
Published: (2013)
by: Letichevsky, A., et al.
Published: (2013)
Analysis of deformations of copper-chromium based electrodes in resistance-spot welding
by: Ch. Nachimani
Published: (2015)
by: Ch. Nachimani
Published: (2015)
Mechanical properties structural sensitivity of Al-Mg-Si ternary system cast aluminum alloys at elevated temperatures
by: P. M. Romanko, et al.
Published: (2014)
by: P. M. Romanko, et al.
Published: (2014)
Similar Items
-
Electron Backscatter Diffraction Analysis of the Microstructure Fineness in Pure Copper under Torsional Deformation
by: Wang, C.P., et al.
Published: (2018) -
Thermodynamic verification of constitutive equations for a nonlinear anisotropic body
by: E. E. Kurchakov
Published: (2015) -
The effect of plastic deformation on the behavior of low-temperature minimum of thermopower of copper
by: V. N. Svetlov
Published: (2012) -
Surface impedance of copper MOB depending on the annealing temperature and deformation degree
by: Kutovoj, V.A., et al.
Published: (2006) -
Concerning problematic character of statistical verification of theoretical constructs
by: S. Dembitskij
Published: (2014)