Buchumschlag

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Analytical Modeling

The results of analytical analysis of interfacial bond stress-slip behavior of steel bars embedded in recycled aggregate concrete (RAC) are reported in this paper. Significantly large data from the laboratory pullout tests of specimens were analyzed including the specimens tested by the author. A bo...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2019
1. Verfasser:	Rafi, M.M.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2019
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/188316
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Analytical Modeling / M.M. Rafi // Проблеми міцності. — 2019. — № 1. — С. 187-196. — Бібліогр.: 44 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Experimental Testing
von: Rafi, M.M.
Veröffentlicht: (2018)

Analytical Analysis of the Interfacial Stress in Damaged Reinforced Concrete Beams Strengthened by Bonded Composite Plates
von: Hassaine Daouadji, T.
Veröffentlicht: (2013)

Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)

An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
von: Zhao, Z., et al.
Veröffentlicht: (2016)

Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
von: Jin, H.R., et al.
Veröffentlicht: (2018)

Experimental Study of Concrete Subjected to Explosive Loading
von: Rekucki, R., et al.
Veröffentlicht: (2002)

Experimental study of the salt solution erosing influence on strength of concrete with recycled coarse aggregate
von: Liu Faming, et al.
Veröffentlicht: (2017)

Preparation, Properties, and Microstructure of Graphite Powder-Containing Conductive Concrete
von: Liu, S.H., et al.
Veröffentlicht: (2019)

Coupled Deformation and Diffusion Process at the Stainless Steel/Carbon Steel Interface in the Deformation Bonding Process
von: Li, S., et al.
Veröffentlicht: (2018)

Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
von: Tang, C., et al.
Veröffentlicht: (2015)

Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)

A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)

Flexural Fracture Toughness and First-Crack Strength Tests of Steel Fiber-Silica Fume Concrete and Its Engineering Applications
von: Zhang, J.P., et al.
Veröffentlicht: (2018)

Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)

Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
von: Vasudevan, G., et al.
Veröffentlicht: (2013)

Numerical simulation of brittle damage in concrete specimens
von: Labadi, Y., et al.
Veröffentlicht: (2005)

In service inspections of thick walled concrete sructures
von: Pecinka, L., et al.
Veröffentlicht: (2006)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)

Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
von: Zhang, L., et al.
Veröffentlicht: (2015)

Thermomechanical Response of LNG Concrete Tank to Cryogenic Temperatures
von: Dahmani, L.
Veröffentlicht: (2011)

Analysis of Crack Coalescence in Concrete Using Neural Networks
von: Haeri, H., et al.
Veröffentlicht: (2016)

Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints
von: Kubita, A., et al.
Veröffentlicht: (2016)

Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)

Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)

Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements
von: Dahmani, L., et al.
Veröffentlicht: (2009)

Crack Identification in Reinforced Concrete Beams Using ANSYS Software
von: Dahmani, L., et al.
Veröffentlicht: (2010)

Mechanical Stresses and Crack Analysis of Concrete under the Hygrothermic Effect
von: Dahmani, L.
Veröffentlicht: (2011)

On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
von: Ferreira, A. J. M.
Veröffentlicht: (2003)

Evaluating Sensitivity of an AAR-Affected Concrete Arch Dam to the Effects of Structural Joints and Solar Radiation
von: Lamea, M., et al.
Veröffentlicht: (2015)

Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
von: Ye, X.F., et al.
Veröffentlicht: (2018)

Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)

Laser Beam Surface Pretreatment for the Adhesive Bond Strength Improvement
von: Ciecińska, B.
Veröffentlicht: (2016)

Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
von: Haeri, H.
Veröffentlicht: (2015)

XFEM Simulation of Pore-Induced Fracture of a Heterogeneous Concrete Beam in Three-Point Bending
von: Zhang, C.C., et al.
Veröffentlicht: (2018)

Magnetic method for determination of the thickness of protective concrete layer and diameter of rebars of building structures
von: A. P. Gusev, et al.
Veröffentlicht: (2017)

Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008)

Micromechanical Coupled Study of Crack Growth Initiation Criterion in Pressure Vessel Steel
von: Rakin, M., et al.
Veröffentlicht: (2004)

Predictive Performance of Artificial Neural Network and Multiple Linear Regression Models in Predicting Adhesive Bonding Strength of Wood
von: Bardak, S., et al.
Veröffentlicht: (2016)

Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint
von: Sajikumar, K.S., et al.
Veröffentlicht: (2014)

Study on the Cracking Mechanism of YQ450NQR1 High-Strength Weathering Steel
von: Qing, J.S., et al.
Veröffentlicht: (2018)