Investigation into hydride reorientation in dummy fuel rod cladding (Zr-1%Nb) under internal pressure during testing simulating SNF handling and accidents with limiting cladding heating up to 410 °С
This paper presents the results of experimental investigations into hydride reorientation that (HRT) can occur in fuel rod claddings under conditions simulating normal and some accident SNF handling modes with limiting cladding heating up to 410 °C. Dummy fuel rods with Zr-1%Nb cladding with differe...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2020 |
| Main Authors: | Riedkina, G.P., Chernyayeva, Т.P., Grytsyna, V.M., Krasnorutskyy, V.S., Petelguzov, I.A., Slabospytska, O.O. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2020
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/194352 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Investigation into hydride reorientation in dummy fuel rod cladding (Zr-1%Nb) under internal pressure during testing simulating SNF handling and accidents with limiting cladding heating up to 410 °С / G.P. Riedkina, Т.P. Chernyayeva, V.M. Grytsyna, V.S. Krasnorutskyy, I.A. Petelguzov, O.O. Slabospytska // Problems of atomic science and tecnology. — 2020. — № 1. — С. 96-105. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Facility for hydrogenation and thermal testing of internally pressurized dummy fuel rods
by: Dolgiy, V.A., et al.
Published: (2020)
by: Dolgiy, V.A., et al.
Published: (2020)
Effect of Hydrogen, Hydride Orientation and Temperature on Low-Cycle Fatigue Resistance of Zr-1%Nb Fuel Rod Claddings
by: G. Riedkina, et al.
Published: (2021)
by: G. Riedkina, et al.
Published: (2021)
Identification of the fuel rod cladding destruction from the change of the SNF storage casks radiation
by: Rudychev, V.G., et al.
Published: (2020)
by: Rudychev, V.G., et al.
Published: (2020)
Assessment of impacting the thin protective coatings on the stress–strain state of the cladding of fuel rods of nuclear reactors
by: Povolotskii, E.V., et al.
Published: (2020)
by: Povolotskii, E.V., et al.
Published: (2020)
Influencing of thin protective coatings on natural frequencies of radial oscillations of claddings of fuel rods of nuclear reactors
by: Mazurenko, Yu.E., et al.
Published: (2020)
by: Mazurenko, Yu.E., et al.
Published: (2020)
Explosive cladding for ITER components
by: E. Karton, et al.
Published: (2009)
by: E. Karton, et al.
Published: (2009)
Industrial Applications of explosion clad
by: Dzh. G. Benker
Published: (2009)
by: Dzh. G. Benker
Published: (2009)
Assessment of the corrosion resistance of the main alternative materials for light water reactors tolerant fuel rod cladding
by: Zuyok, V., et al.
Published: (2022)
by: Zuyok, V., et al.
Published: (2022)
Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
by: Kuprin, A.S., et al.
Published: (2023)
by: Kuprin, A.S., et al.
Published: (2023)
Research the behaviour and properties of WWER type fuel claddings from Zr1%Nb alloy in loss of the coolant accident
by: Semerak, M.M., et al.
Published: (2021)
by: Semerak, M.M., et al.
Published: (2021)
About the role of contact resistances in the process of electroslag cladding
by: K. A. Tsykulenko
Published: (2009)
by: K. A. Tsykulenko
Published: (2009)
Analysis of process of bead shaping in cladding on narrow substrate
by: K. A. Jushchenko, et al.
Published: (2015)
by: K. A. Jushchenko, et al.
Published: (2015)
Application of RELAP5/MOD3.2 Cladding Deformation Model for VVER-1000 Fuel in Design-Basis Accident Analysis
by: Ju. Ju. Vorobev, et al.
Published: (2016)
by: Ju. Ju. Vorobev, et al.
Published: (2016)
Restoration of worn helical coarse pitch gears by electroslag cladding
by: S. M. Kozulin, et al.
Published: (2021)
by: S. M. Kozulin, et al.
Published: (2021)
Restoration explosion cladding of threaded channel of railway car axles
by: L. M. Lobanov, et al.
Published: (2012)
by: L. M. Lobanov, et al.
Published: (2012)
One-sided welding of clad pipelines of nuclear power plants
by: O. G. Kasatkin, et al.
Published: (2012)
by: O. G. Kasatkin, et al.
Published: (2012)
A method for VVER fuel element cladding reliability prediction
by: S. N. Pelykh, et al.
Published: (2014)
by: S. N. Pelykh, et al.
Published: (2014)
Evaluation of the Applicability of Cladding Deformation Model for VVER-1000 Fuel
by: Ju. Ju. Vorobev, et al.
Published: (2015)
by: Ju. Ju. Vorobev, et al.
Published: (2015)
Multi-group modeling of protection against neutron and gamma radiation by materials based on titanium hydride
by: Yastrebinsky, R.N., et al.
Published: (2020)
by: Yastrebinsky, R.N., et al.
Published: (2020)
Characteristics of formation and properties of brass-steel joint produced by autovacuum cladding
by: I. P. Serebrianyk, et al.
Published: (2022)
by: I. P. Serebrianyk, et al.
Published: (2022)
Specifics of non-stationarity of process of explosion cladding of large-sized billets
by: Sh. Silchenko, et al.
Published: (2009)
by: Sh. Silchenko, et al.
Published: (2009)
Technology for automatic submerged-arc welding and cladding at low-density current
by: S. V. Dragan, et al.
Published: (2009)
by: S. V. Dragan, et al.
Published: (2009)
Soatings based on nano clad powders for the corrosion protection of magnesium alloys
by: I. V. Smyrnov, et al.
Published: (2012)
by: I. V. Smyrnov, et al.
Published: (2012)
Fractal model of estimating quality of cold worked fuel cladding tubes
by: Vakhrusheva, V.S., et al.
Published: (2021)
by: Vakhrusheva, V.S., et al.
Published: (2021)
Possibility of preserving shape and sizes of cylindrical tubular billets of moulds in explosion cladding
by: Ju. P. Meshcherjakov, et al.
Published: (2009)
by: Ju. P. Meshcherjakov, et al.
Published: (2009)
Application of laser-arc cladding for filling of narrow cavities in products of aluminium alloys
by: Ju. Khaskin
Published: (2009)
by: Ju. Khaskin
Published: (2009)
Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment
by: Guan, B., et al.
Published: (2019)
by: Guan, B., et al.
Published: (2019)
Process and property of hot-rolled stainless steel/carbon steel cladding bar
by: Zhining Jia, et al.
Published: (2016)
by: Zhining Jia, et al.
Published: (2016)
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
by: Jin, H.R., et al.
Published: (2018)
by: Jin, H.R., et al.
Published: (2018)
Synthesis of hydrogen storage materials in a Ti-Zr-Ni system using the hydride cycle technology during dehydrogenation by an electron beam in a vacuum
by: Dmytrenko, O.E., et al.
Published: (2020)
by: Dmytrenko, O.E., et al.
Published: (2020)
Research status and application of the high-entropy and traditional alloys fabricated via the laser cladding
by: Y. Geng, et al.
Published: (2020)
by: Y. Geng, et al.
Published: (2020)
A method for minimization of cladding failure parameter accumulation probability in VVER fuel elements
by: Pelykh, S.N., et al.
Published: (2014)
by: Pelykh, S.N., et al.
Published: (2014)
Influence of structure of hafnium rods on their mechanical properties, corrosion and radiation resistances
by: V. A. Zuyok, et al.
Published: (2020)
by: V. A. Zuyok, et al.
Published: (2020)
Structural peculiarities of metal of end claddings on single crystal blades made from nickel superalloys
by: K. A. Jushchenko, et al.
Published: (2009)
by: K. A. Jushchenko, et al.
Published: (2009)
Features of a low-ampere argon-arc and microplasma powder cladding on a narrow substrate
by: A. V. Jarovitsyn, et al.
Published: (2009)
by: A. V. Jarovitsyn, et al.
Published: (2009)
Determination of parameters of shock-compressed gas in welding gap ahead of contact point in explosion cladding
by: Ju. Bondarenko, et al.
Published: (2009)
by: Ju. Bondarenko, et al.
Published: (2009)
Experience in cladding of marine propeller shaft at PJSC "Kherson Shipyard"
by: Zh. G. Goloborodko
Published: (2012)
by: Zh. G. Goloborodko
Published: (2012)
Properties of iron-base alloys for plasma-powder cladding of sealing surfaces of different-application fittings
by: E. F. Perepletchikov, et al.
Published: (2011)
by: E. F. Perepletchikov, et al.
Published: (2011)
The influence of thermochemical treatment on oxidation of fuel cladding tubes made of Zr–1% Nb alloy
by: V. M. Voievodin, et al.
Published: (2020)
by: V. M. Voievodin, et al.
Published: (2020)
The fatigue damage control of Al-clad D16AT alloy by characteristics of surface deformation relief
by: S. R. Ignatovich, et al.
Published: (2011)
by: S. R. Ignatovich, et al.
Published: (2011)
Similar Items
-
Facility for hydrogenation and thermal testing of internally pressurized dummy fuel rods
by: Dolgiy, V.A., et al.
Published: (2020) -
Effect of Hydrogen, Hydride Orientation and Temperature on Low-Cycle Fatigue Resistance of Zr-1%Nb Fuel Rod Claddings
by: G. Riedkina, et al.
Published: (2021) -
Identification of the fuel rod cladding destruction from the change of the SNF storage casks radiation
by: Rudychev, V.G., et al.
Published: (2020) -
Assessment of impacting the thin protective coatings on the stress–strain state of the cladding of fuel rods of nuclear reactors
by: Povolotskii, E.V., et al.
Published: (2020) -
Influencing of thin protective coatings on natural frequencies of radial oscillations of claddings of fuel rods of nuclear reactors
by: Mazurenko, Yu.E., et al.
Published: (2020)