Buchumschlag

Structure and properties of coatings based on FeCrAl and Cr18Ni10T

The process of vacuum-arc deposition of protective coatings from multicomponent FeCrAl cathodes and 18Cr10NiT stainless steel onto fragments of Zr1Nb alloy claddings has been developed. The influence of the reaction atmosphere (vacuum, nitrogen, oxygen) during the deposition of coatings on their str...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Вопросы атомной науки и техники
Datum:	2020
Hauptverfasser:	Belous, V.А., Bortnitskaya, М.A., Vasilenko, R.L., Voyevodin, V.N., Klimenko, І.О., Kovalenko, V.І., Kolodiy, І.V., Kuprin, A.S., Marinin, V.G., Ovcharenko, V.D., Tikhonovsky, М.А.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2020
Schlagworte:	Physics of radiation and ion-plasma technologies
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/194374
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Structure and properties of coatings based on FeCrAl and Cr18Ni10T / V.А. Belous, М.A. Bortnitskaya, R.L. Vasilenko, V.N. Voyevodin, І.О. Klimenko, V.І. Kovalenko, І.V. Kolodiy, A.S. Kuprin, V.G. Marinin, V.D. Ovcharenko, М.А. Tikhonovsky // Problems of atomic science and tecnology. — 2020. — № 2. — С. 125-131. — Бібліогр.: 20 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)

Surface morphology and sputtering of FeCrAl coating on steel exposed to low-energy deuterium plasmas
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)

The influence of 18Cr10NiTi and ODS 18Cr10NiTi austenitic stainless steels microstructure on the deuterium desorption
von: Kalchenko, A.S., et al.
Veröffentlicht: (2020)

Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
von: Warcholinski, B., et al.
Veröffentlicht: (2022)

Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
von: Kuprin, A.S., et al.
Veröffentlicht: (2023)

Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
von: Belous, V.A., et al.
Veröffentlicht: (2021)

Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)

Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
von: Sukhova, O.V.
Veröffentlicht: (2020)

Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
von: Kovalenko, V.I., et al.
Veröffentlicht: (2019)

Effect of argon-ion irradiation on cavity formation in 18Cr10NiTi austenitic steel and its strengthened version
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)

Structure and corrosion resistance of vacuum-arc multi-period CrN/Cu, ZrN/Cu, and NbN/Cu coatings
von: Postelnyk, H.O., et al.
Veröffentlicht: (2020)

Cavitation and erosion resistance of vacuum arc Ti, Ti-Al, Ti-Zr, and Ti-Ni coatings
von: Klimenko, І.О., et al.
Veröffentlicht: (2022)

Effect of nitrogen pressure on the structural and mechanical properties of V-Mo-N coatings deposited by cathodic arc evaporation
von: Kuprin, A.S., et al.
Veröffentlicht: (2022)

Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)

Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)

Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)

Comparative study of helium bubble formation in Cr-Fe-Ni-Mn high-entropy alloy and 18Cr10NiTi steel after irradiation and post-irradiation annealing
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)

The effect OF Cr, Cr-N and Cr-Ox coatings on deuterium retention and penetration in zirconium alloy Zr-1Nb
von: Kopanetz, I.E., et al.
Veröffentlicht: (2015)

Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)

Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
von: Kuprin, A.S., et al.
Veröffentlicht: (2019)

Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)

Optimization of use conditions for cathodic arc nickel coating doped with phosphorus
von: Lapitskaya, V.A., et al.
Veröffentlicht: (2021)

Effect of grain boundary on the cavity formation behavior in 1.4 MeV Ar⁺ irradiated 18Cr10NiTi-ODS steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2023)

Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)

Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)

CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)

Creation of various structures, including nanometer scale, and investigation of mechanical and dissipative properties of VT6 titanium alloy
von: Sokolenko, V.I., et al.
Veröffentlicht: (2022)

Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)

Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)

Structure and properties of powder gas-plasma coatings based on nickel
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)

Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
von: Gurin, I.V., et al.
Veröffentlicht: (2022)

Deuterium trapping and sputtering of tungsten coatings exposed to low-energy deuterium plasma
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)

Study of nanomodification of nickel alloy GS3 with titanium carbide
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
von: Krivchik, L., et al.
Veröffentlicht: (2021)

Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)

Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)

Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)

Use of detonation sputtering to increase the durability of hydraulic hammer critical parts
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)

Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)