Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
In the work, the surface of samples made of 25X1MF steel was saturated with chromium. For this, the method of vacuum activated diffusion chromium plating was used. In this process, sodium chloride was used as an activator. It was found that vacuum activated diffusion chromium plating of samples made...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2020 |
| Hauptverfasser: | Rudenkyi, S.G., Zmij, V.I., Kartzev, N.F., Korneev, A.A., Kunchenko, A.V., Kunchenko, V.V., Kunchenko, Y.V., Marinin, V.G., Kovalenko, V.I., Bortnytska, M.O., Ryzhova, T.P., Lashenko, I.A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2020
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/194375 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF / S.G. Rudenkyi, V.I. Zmij, N.F. Kartzev, A.A. Korneev, A.V. Kunchenko, V.V. Kunchenko, Y.V. Kunchenko, V.G. Marinin, V.I. Kovalenko, M.O. Bortnytska, T.P. Ryzhova, I.A. Lashenko // Problems of atomic science and tecnology. — 2020. — № 2. — С. 132-138. — Бібліогр.: 9 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)
Study of the process of thermal dissociation of tantal pentachloride in vacuum
von: Polyakov, Yu.I., et al.
Veröffentlicht: (2019)
von: Polyakov, Yu.I., et al.
Veröffentlicht: (2019)
The model of the formation of a layered structure of coatings obtained by vacuum arc deposition
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2005)
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2005)
Improvement of heat-resistance of the coating for gas-turbine engine blades
von: S. G. Rudenkij, et al.
Veröffentlicht: (2019)
von: S. G. Rudenkij, et al.
Veröffentlicht: (2019)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
ПРОЦЕС ВАКУУМНОГО АКТИВОВАНОГО ДИФУЗІЙНОГО ХРОМУВАННЯ СТАЛЕЙ 15Х12ВНМФ і 20Х1М1Ф1ТР
von: Rudenki, Sergey, et al.
Veröffentlicht: (2022)
von: Rudenki, Sergey, et al.
Veröffentlicht: (2022)
On the formation of micro-, nanolayer coatings by the vacuum-arc deposition method
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2004)
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2004)
Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
von: Kovalenko, V.I., et al.
Veröffentlicht: (2019)
von: Kovalenko, V.I., et al.
Veröffentlicht: (2019)
About depth of the zone of updating of properties (hardening) materials the irradiation at T ≤ 100 °S low-energy plasma of the glow descharge
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2009)
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2009)
About increase of resistance of the tool with nanolayer n-TiNx/CrNx coverings during cutting
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2007)
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2007)
Influence of low energy glow discharge to the properties of irradiated materials in the process of vacuum-arc deposition
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2009)
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2009)
Vacuum Activated Diffusion Chromium Plating of 15Kh12VNMF and 20Kh1M1F1TR Steels
von: S. G. Rudenki, et al.
Veröffentlicht: (2022)
von: S. G. Rudenki, et al.
Veröffentlicht: (2022)
TiO₂-2 radiating damages as a result of the irradiation helium ions with energies of 0.12 and 4 MeV on the linear accelerator
von: Butenko, V.I., et al.
Veröffentlicht: (2023)
von: Butenko, V.I., et al.
Veröffentlicht: (2023)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
System of Management of Information Flows in the System for Budgeting of Trade Enterprises
von: M. O. Kunchenko
Veröffentlicht: (2015)
von: M. O. Kunchenko
Veröffentlicht: (2015)
Research of a vacuum diffusion boron silicification process for constructional materials
von: Zmij, V.I., et al.
Veröffentlicht: (2013)
von: Zmij, V.I., et al.
Veröffentlicht: (2013)
Vacuum CVD coatings Ta on target W plate of neutrons source
von: Borts, B.V., et al.
Veröffentlicht: (2019)
von: Borts, B.V., et al.
Veröffentlicht: (2019)
Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
von: Kuprin, A.S., et al.
Veröffentlicht: (2019)
von: Kuprin, A.S., et al.
Veröffentlicht: (2019)
High precision kvazyiterative two-channel servosystem with differential gear
von: A. A. Khudjaev, et al.
Veröffentlicht: (2015)
von: A. A. Khudjaev, et al.
Veröffentlicht: (2015)
On the possibility of obtaining a beam of heavy ions in the form of an “open umbrella” with subsequent deposition in the separator manifold
von: Yuferov, V.B., et al.
Veröffentlicht: (2023)
von: Yuferov, V.B., et al.
Veröffentlicht: (2023)
Modernization of the helium ion accelerator microwave power supply system
von: Gaponenko, N.I., et al.
Veröffentlicht: (2023)
von: Gaponenko, N.I., et al.
Veröffentlicht: (2023)
Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
von: Chabak, Yu.G., et al.
Veröffentlicht: (2019)
von: Chabak, Yu.G., et al.
Veröffentlicht: (2019)
Vacuum arc sputtering of subsrate surface by chrome and molybdenum ions
von: V. A. Stolbovoj
Veröffentlicht: (2009)
von: V. A. Stolbovoj
Veröffentlicht: (2009)
Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
von: Bovda, V.A., et al.
Veröffentlicht: (2019)
von: Bovda, V.A., et al.
Veröffentlicht: (2019)
The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
von: Sobol', O.V., et al.
Veröffentlicht: (2019)
von: Sobol', O.V., et al.
Veröffentlicht: (2019)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)
von: Sobol, O.V., et al.
Veröffentlicht: (2020)
Modification of medium-chrome deposited metal
von: K. K. Stepnov, et al.
Veröffentlicht: (2011)
von: K. K. Stepnov, et al.
Veröffentlicht: (2011)
Movement of charged particles in magnetic and nonuniform stochastic electric fields
von: Azarenkov, N.A., et al.
Veröffentlicht: (2021)
von: Azarenkov, N.A., et al.
Veröffentlicht: (2021)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
von: Belous, V.А., et al.
Veröffentlicht: (2020)
von: Belous, V.А., et al.
Veröffentlicht: (2020)
Spatial separation of ions of a given mass range in the demo-imitation separator at the first turn of ionic trajectory
von: Katrechko, V.V., et al.
Veröffentlicht: (2021)
von: Katrechko, V.V., et al.
Veröffentlicht: (2021)
Micro- and nanoindentation of pyrolytic carbide-chrome coatings
von: S. A. Krokhmal, et al.
Veröffentlicht: (2011)
von: S. A. Krokhmal, et al.
Veröffentlicht: (2011)
Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
von: Belous, V.А., et al.
Veröffentlicht: (2019)
von: Belous, V.А., et al.
Veröffentlicht: (2019)
Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2019)
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2019)
Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)
Digital processing of optical emission spectra of magnetron sputtering plasma system
von: Afanasіeva, I.A., et al.
Veröffentlicht: (2019)
von: Afanasіeva, I.A., et al.
Veröffentlicht: (2019)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
von: Belous, V.A., et al.
Veröffentlicht: (2021)
von: Belous, V.A., et al.
Veröffentlicht: (2021)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Ähnliche Einträge
-
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021) -
Study of the process of thermal dissociation of tantal pentachloride in vacuum
von: Polyakov, Yu.I., et al.
Veröffentlicht: (2019) -
The model of the formation of a layered structure of coatings obtained by vacuum arc deposition
von: Ju. V. Kunchenko, et al.
Veröffentlicht: (2005) -
Improvement of heat-resistance of the coating for gas-turbine engine blades
von: S. G. Rudenkij, et al.
Veröffentlicht: (2019) -
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)