Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
In the present study, the microstructure development and properties of the starting Fe-B-C powders for plasma spraying fabricated by dispersing a consumable rotating rod were investigated as functions of alloying elements additions. These powders were prepared in the following compositional ranges:...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2020 |
| Main Author: | Sukhova, O.V. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2020
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/194417 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings / O.V. Sukhova // Problems of atomic science and tecnology. — 2020. — № 4. — С. 77-83. — Бібліогр.: 30 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021)
by: Vasilenko, R.L., et al.
Published: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020)
by: Belous, V.А., et al.
Published: (2020)
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
by: Ryabtsev, S.I., et al.
Published: (2020)
by: Ryabtsev, S.I., et al.
Published: (2020)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
by: Belous, V.A., et al.
Published: (2021)
by: Belous, V.A., et al.
Published: (2021)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
by: Rudenky, S.G., et al.
Published: (2021)
by: Rudenky, S.G., et al.
Published: (2021)
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
by: Warcholinski, B., et al.
Published: (2022)
by: Warcholinski, B., et al.
Published: (2022)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
by: Sobol, O.V., et al.
Published: (2020)
by: Sobol, O.V., et al.
Published: (2020)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
by: Koshevoy, K.I., et al.
Published: (2021)
by: Koshevoy, K.I., et al.
Published: (2021)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
by: Reshetnyak, E.N., et al.
Published: (2023)
by: Reshetnyak, E.N., et al.
Published: (2023)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
by: Shirokov, B.M., et al.
Published: (2022)
by: Shirokov, B.M., et al.
Published: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
by: Kalinichenko, A.I., et al.
Published: (2021)
by: Kalinichenko, A.I., et al.
Published: (2021)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
by: Kalinichenko, O.I., et al.
Published: (2023)
by: Kalinichenko, O.I., et al.
Published: (2023)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
by: Belous, V.А., et al.
Published: (2019)
by: Belous, V.А., et al.
Published: (2019)
Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
by: Kovalenko, V.I., et al.
Published: (2019)
by: Kovalenko, V.I., et al.
Published: (2019)
Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
by: Sereda, B., et al.
Published: (2023)
by: Sereda, B., et al.
Published: (2023)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
by: Vahrusheva, V.S., et al.
Published: (2022)
by: Vahrusheva, V.S., et al.
Published: (2022)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
by: Gribanov, Yu.A., et al.
Published: (2020)
by: Gribanov, Yu.A., et al.
Published: (2020)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
by: Воеводин, В.Н., et al.
Published: (2021)
by: Воеводин, В.Н., et al.
Published: (2021)
CT study of products from non-metallic composites reinforced by carbon fibers
by: Levenets, V.V., et al.
Published: (2022)
by: Levenets, V.V., et al.
Published: (2022)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
by: Krivchik, L., et al.
Published: (2021)
by: Krivchik, L., et al.
Published: (2021)
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
by: Efimenko, N.G., et al.
Published: (2020)
by: Efimenko, N.G., et al.
Published: (2020)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
by: Hlushkova, D.B., et al.
Published: (2021)
by: Hlushkova, D.B., et al.
Published: (2021)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
by: Andrieieva, O.L., et al.
Published: (2023)
by: Andrieieva, O.L., et al.
Published: (2023)
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
by: Rudenkyi, S.G., et al.
Published: (2020)
by: Rudenkyi, S.G., et al.
Published: (2020)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
by: Novikov, V.Yu., et al.
Published: (2019)
by: Novikov, V.Yu., et al.
Published: (2019)
Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
by: Chabak, Yu.G., et al.
Published: (2019)
by: Chabak, Yu.G., et al.
Published: (2019)
Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
by: Kuprin, A.S., et al.
Published: (2019)
by: Kuprin, A.S., et al.
Published: (2019)
The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
by: Sobol', O.V., et al.
Published: (2019)
by: Sobol', O.V., et al.
Published: (2019)
Vacuum CVD coatings Ta on target W plate of neutrons source
by: Borts, B.V., et al.
Published: (2019)
by: Borts, B.V., et al.
Published: (2019)
Digital processing of optical emission spectra of magnetron sputtering plasma system
by: Afanasіeva, I.A., et al.
Published: (2019)
by: Afanasіeva, I.A., et al.
Published: (2019)
Surface morphology and sputtering of FeCrAl coating on steel exposed to low-energy deuterium plasmas
by: Voyevodin, V.N., et al.
Published: (2019)
by: Voyevodin, V.N., et al.
Published: (2019)
Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
by: Bovda, V.A., et al.
Published: (2019)
by: Bovda, V.A., et al.
Published: (2019)
Kinetic regularities of the formation of gas products under the influence of ionizing radiation on biomass
by: Khalilov, Z.Z., et al.
Published: (2019)
by: Khalilov, Z.Z., et al.
Published: (2019)
Similar Items
-
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022) -
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021) -
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020) -
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
by: Ryabtsev, S.I., et al.
Published: (2020) -
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
by: Belous, V.A., et al.
Published: (2021)