Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
The regularities of structural formation of the weld metal and HAZ during multilayer welding, made by the transverse humping method, with short sections of defects on cast steel 15Kh1M1FL with perlite electrodes without heating and heat treatment are considered. It has been established that the stru...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2020 |
| Main Authors: | Efimenko, N.G., Artyomova, S.V. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2020
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/194418 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing / N.G. Efimenko, S.V. Artyomova // Problems of atomic science and tecnology. — 2020. — № 4. — С. 84-88. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
by: Hlushkova, D.B., et al.
Published: (2021)
by: Hlushkova, D.B., et al.
Published: (2021)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
by: Vahrusheva, V.S., et al.
Published: (2022)
by: Vahrusheva, V.S., et al.
Published: (2022)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
by: Rudenky, S.G., et al.
Published: (2021)
by: Rudenky, S.G., et al.
Published: (2021)
Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
by: Sereda, B., et al.
Published: (2023)
by: Sereda, B., et al.
Published: (2023)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
by: Sobol, O.V., et al.
Published: (2020)
by: Sobol, O.V., et al.
Published: (2020)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
by: Kalinichenko, A.I., et al.
Published: (2021)
by: Kalinichenko, A.I., et al.
Published: (2021)
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
by: Ryabtsev, S.I., et al.
Published: (2020)
by: Ryabtsev, S.I., et al.
Published: (2020)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
by: Gribanov, Yu.A., et al.
Published: (2020)
by: Gribanov, Yu.A., et al.
Published: (2020)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
by: Sukhova, O.V.
Published: (2020)
by: Sukhova, O.V.
Published: (2020)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
by: Воеводин, В.Н., et al.
Published: (2021)
by: Воеводин, В.Н., et al.
Published: (2021)
CT study of products from non-metallic composites reinforced by carbon fibers
by: Levenets, V.V., et al.
Published: (2022)
by: Levenets, V.V., et al.
Published: (2022)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
by: Krivchik, L., et al.
Published: (2021)
by: Krivchik, L., et al.
Published: (2021)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
by: Kalinichenko, O.I., et al.
Published: (2023)
by: Kalinichenko, O.I., et al.
Published: (2023)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
by: Reshetnyak, E.N., et al.
Published: (2023)
by: Reshetnyak, E.N., et al.
Published: (2023)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
by: Koshevoy, K.I., et al.
Published: (2021)
by: Koshevoy, K.I., et al.
Published: (2021)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
by: Andrieieva, O.L., et al.
Published: (2023)
by: Andrieieva, O.L., et al.
Published: (2023)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
by: Belous, V.A., et al.
Published: (2021)
by: Belous, V.A., et al.
Published: (2021)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021)
by: Vasilenko, R.L., et al.
Published: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020)
by: Belous, V.А., et al.
Published: (2020)
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
by: Warcholinski, B., et al.
Published: (2022)
by: Warcholinski, B., et al.
Published: (2022)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
by: Shirokov, B.M., et al.
Published: (2022)
by: Shirokov, B.M., et al.
Published: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
by: Rudenkyi, S.G., et al.
Published: (2020)
by: Rudenkyi, S.G., et al.
Published: (2020)
Hardening of leading edges of turbine blades by electrospark alloying
by: Kalinina, N.E., et al.
Published: (2019)
by: Kalinina, N.E., et al.
Published: (2019)
Study of the process of thermal dissociation of tantal pentachloride in vacuum
by: Polyakov, Yu.I., et al.
Published: (2019)
by: Polyakov, Yu.I., et al.
Published: (2019)
Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
by: Belous, V.А., et al.
Published: (2019)
by: Belous, V.А., et al.
Published: (2019)
Recrystallization in the metal of welding joints of steam trucks
by: Dmytryk, V.V., et al.
Published: (2019)
by: Dmytryk, V.V., et al.
Published: (2019)
Production of molecular hydrogen formed by the thermal and radiation-thermal transformation of water in the nano-Si+H₂O system
by: Jafarov, J.D., et al.
Published: (2019)
by: Jafarov, J.D., et al.
Published: (2019)
Effect of defects originating under the proton irradiation on the electrophysical and detector properties of CdTe:Cl and CdZnTe
by: Kondrik, A.I.
Published: (2021)
by: Kondrik, A.I.
Published: (2021)
Behavior of the Ti-Zr-Ni thin film containing quasicrystalline and approximant phases under radiative-thermal action in transition modes
by: Malykhin, S.V., et al.
Published: (2020)
by: Malykhin, S.V., et al.
Published: (2020)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
by: Novikov, V.Yu., et al.
Published: (2019)
by: Novikov, V.Yu., et al.
Published: (2019)
Investigation of the radiation-thermal oxidation of beryllium in the system Be-water by the methods of infrared and optical spectroscopy
by: Gadzhieva, N.N., et al.
Published: (2023)
by: Gadzhieva, N.N., et al.
Published: (2023)
Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
by: Bovda, V.A., et al.
Published: (2019)
by: Bovda, V.A., et al.
Published: (2019)
Kinetic regularities of the formation of gas products under the influence of ionizing radiation on biomass
by: Khalilov, Z.Z., et al.
Published: (2019)
by: Khalilov, Z.Z., et al.
Published: (2019)
Similar Items
-
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
by: Hlushkova, D.B., et al.
Published: (2021) -
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022) -
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023) -
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022) -
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
by: Vahrusheva, V.S., et al.
Published: (2022)