Findif code simulations of OP-1.1 Wendelstein 7-X discharges

The current development state of the finite difference, multi-fluid, 3D plasma code Findif is detailed. The code was run on four meshes prepared for the OP-1.1 wall geometry of the Wendelstein 7-X stellarator. The meshes were produced for 4 magnetic configurations; two of them are finite-beta (non v...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Вопросы атомной науки и техники
Datum:2019
Hauptverfasser: Pełka, G., Stępniewski, W., Zagórski, R., W7-X Team
Format: Artikel
Sprache:English
Veröffentlicht: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2019
Schlagworte:
Online Zugang:https://nasplib.isofts.kiev.ua/handle/123456789/194579
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:Findif code simulations of OP-1.1 Wendelstein 7-X discharges / G. Pełka, W. Stępniewski, R. Zagórski, W7-X Team // Problems of atomic science and tecnology. — 2019. — № 1. — С. 27-29. — Бібліогр.: 5 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id nasplib_isofts_kiev_ua-123456789-194579
record_format dspace
spelling Pełka, G.
Stępniewski, W.
Zagórski, R.
W7-X Team
2023-11-27T15:00:51Z
2023-11-27T15:00:51Z
2019
Findif code simulations of OP-1.1 Wendelstein 7-X discharges / G. Pełka, W. Stępniewski, R. Zagórski, W7-X Team // Problems of atomic science and tecnology. — 2019. — № 1. — С. 27-29. — Бібліогр.: 5 назв. — англ.
1562-6016
PACS: 02.60.Cb, 02.70.Bf, 52.25.Xz, 52.30.Ex, 52.55.Hc
https://nasplib.isofts.kiev.ua/handle/123456789/194579
The current development state of the finite difference, multi-fluid, 3D plasma code Findif is detailed. The code was run on four meshes prepared for the OP-1.1 wall geometry of the Wendelstein 7-X stellarator. The meshes were produced for 4 magnetic configurations; two of them are finite-beta (non vacuum). The simulated volume covers plasma edge; the computations of limiter heat load distributions were the main goal. Plasma radiation was not taken into account.
Докладно наведено поточну стадію розробки кінцево-різницевого тривимірного коду Findif для багаторідинної моделі плазми. Код було запущено на чотирьох сітках, підготовлених для геометрії стінки OP-1.1 стеларатора Wendelstein 7-X. Сітки згенеровано для 4-х магнітних конфігурацій, дві з яких – зі скінченним бета (не вакуум). Змодельований об’єм охоплює край плазми; основна мета полягає в розрахунках розподілів теплових навантажень на лімітер. Випромінювання плазми не враховувалося.
Подробно изложена текущая стадия разработки конечно-разностного трехмерного кода Findif для многожидкостной модели плазмы. Код был запущен на четырех сетках, подготовленных для геометрии стенки OP-1.1 стелларатора Wendelstein 7-X. Сетки сгенерированы для 4-х магнитных конфигураций, две из которых – с конечным бета (не вакуум). Смоделированный объем охватывает край плазмы; основная цель заключается в расчетах распределений тепловых нагрузок на лимитер. Излучение плазмы не учитывалось.
The authors are very thankful to Joachim Geiger and Sergey Bozhenkov, who provided them with data on magnetic field distribution and wall elements positions. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014 – 2018 under the grant agreement № 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This work was partly supported by Polish Ministry of Science and Higher Education within the framework of the scientific financial resources in the year 2018 allocated for the realization of the international co-financed project.
en
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
Вопросы атомной науки и техники
Magnetic confinement
Findif code simulations of OP-1.1 Wendelstein 7-X discharges
Моделювання РОЗРЯДІВ OP-1.1 Wendelstein 7-X за допомогою коду Findif
Моделирование разрядов OP-1.1 Wendelstein 7-X С помощью кода Findif
Article
published earlier
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
title Findif code simulations of OP-1.1 Wendelstein 7-X discharges
spellingShingle Findif code simulations of OP-1.1 Wendelstein 7-X discharges
Pełka, G.
Stępniewski, W.
Zagórski, R.
W7-X Team
Magnetic confinement
title_short Findif code simulations of OP-1.1 Wendelstein 7-X discharges
title_full Findif code simulations of OP-1.1 Wendelstein 7-X discharges
title_fullStr Findif code simulations of OP-1.1 Wendelstein 7-X discharges
title_full_unstemmed Findif code simulations of OP-1.1 Wendelstein 7-X discharges
title_sort findif code simulations of op-1.1 wendelstein 7-x discharges
author Pełka, G.
Stępniewski, W.
Zagórski, R.
W7-X Team
author_facet Pełka, G.
Stępniewski, W.
Zagórski, R.
W7-X Team
topic Magnetic confinement
topic_facet Magnetic confinement
publishDate 2019
language English
container_title Вопросы атомной науки и техники
publisher Національний науковий центр «Харківський фізико-технічний інститут» НАН України
format Article
title_alt Моделювання РОЗРЯДІВ OP-1.1 Wendelstein 7-X за допомогою коду Findif
Моделирование разрядов OP-1.1 Wendelstein 7-X С помощью кода Findif
description The current development state of the finite difference, multi-fluid, 3D plasma code Findif is detailed. The code was run on four meshes prepared for the OP-1.1 wall geometry of the Wendelstein 7-X stellarator. The meshes were produced for 4 magnetic configurations; two of them are finite-beta (non vacuum). The simulated volume covers plasma edge; the computations of limiter heat load distributions were the main goal. Plasma radiation was not taken into account. Докладно наведено поточну стадію розробки кінцево-різницевого тривимірного коду Findif для багаторідинної моделі плазми. Код було запущено на чотирьох сітках, підготовлених для геометрії стінки OP-1.1 стеларатора Wendelstein 7-X. Сітки згенеровано для 4-х магнітних конфігурацій, дві з яких – зі скінченним бета (не вакуум). Змодельований об’єм охоплює край плазми; основна мета полягає в розрахунках розподілів теплових навантажень на лімітер. Випромінювання плазми не враховувалося. Подробно изложена текущая стадия разработки конечно-разностного трехмерного кода Findif для многожидкостной модели плазмы. Код был запущен на четырех сетках, подготовленных для геометрии стенки OP-1.1 стелларатора Wendelstein 7-X. Сетки сгенерированы для 4-х магнитных конфигураций, две из которых – с конечным бета (не вакуум). Смоделированный объем охватывает край плазмы; основная цель заключается в расчетах распределений тепловых нагрузок на лимитер. Излучение плазмы не учитывалось.
issn 1562-6016
url https://nasplib.isofts.kiev.ua/handle/123456789/194579
citation_txt Findif code simulations of OP-1.1 Wendelstein 7-X discharges / G. Pełka, W. Stępniewski, R. Zagórski, W7-X Team // Problems of atomic science and tecnology. — 2019. — № 1. — С. 27-29. — Бібліогр.: 5 назв. — англ.
work_keys_str_mv AT pełkag findifcodesimulationsofop11wendelstein7xdischarges
AT stepniewskiw findifcodesimulationsofop11wendelstein7xdischarges
AT zagorskir findifcodesimulationsofop11wendelstein7xdischarges
AT w7xteam findifcodesimulationsofop11wendelstein7xdischarges
AT pełkag modelûvannârozrâdívop11wendelstein7xzadopomogoûkodufindif
AT stepniewskiw modelûvannârozrâdívop11wendelstein7xzadopomogoûkodufindif
AT zagorskir modelûvannârozrâdívop11wendelstein7xzadopomogoûkodufindif
AT w7xteam modelûvannârozrâdívop11wendelstein7xzadopomogoûkodufindif
AT pełkag modelirovanierazrâdovop11wendelstein7xspomoŝʹûkodafindif
AT stepniewskiw modelirovanierazrâdovop11wendelstein7xspomoŝʹûkodafindif
AT zagorskir modelirovanierazrâdovop11wendelstein7xspomoŝʹûkodafindif
AT w7xteam modelirovanierazrâdovop11wendelstein7xspomoŝʹûkodafindif
first_indexed 2025-12-01T15:34:33Z
last_indexed 2025-12-01T15:34:33Z
_version_ 1850860578598289408