Magnetron discharge intensification for effective deposition of coatings from difficult spray metals
The work is devoted to improvement of magnetron discharge parameters based on a standard magnetron sputtering system (MSS) of the MAG-5 type with an additional anode magnetic trap for discharge electrons in the conditions of localization of the discharge zone in the gap between electrodes to prevent...
Saved in:
| Date: | 2020 |
|---|---|
| Main Authors: | , , , |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2020
|
| Series: | Вопросы атомной науки и техники |
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/194663 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Magnetron discharge intensification for effective deposition of coatings from difficult spray metals / А.G. Chunadra, К.N. Sereda, I.K. Tarasov, Y.A. Vereshchaka // Problems of atomic science and tecnology. — 2020. — № 6. — С. 146-149. — Бібліогр.: 4 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Summary: | The work is devoted to improvement of magnetron discharge parameters based on a standard magnetron sputtering system (MSS) of the MAG-5 type with an additional anode magnetic trap for discharge electrons in the conditions of localization of the discharge zone in the gap between electrodes to prevent charged particles losses. Possibilities of such configuration of MSS for depositing of coatings of materials with low coefficient of sputtering (tungsten) are investigated. The increase of the coating rate has been demonstrated. The mass of the deposited tungsten increased by more than 35% compared to the use of the same MSS without additional anode magnetic trap. |
|---|