Buchumschlag

Intense plastic deformation of high-purity cast beryllium

The effect of intense plastic deformation on the mechanical properties, structure, and texture of high-purity cast beryllium was studied. For the first time, angular pressing of high-purity cast beryllium was carried out at temperatures of 600 and 500 °C. It is shown that the degree of grain refinem...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Вопросы атомной науки и техники
Datum:	2020
Hauptverfasser:	Vasilev, A.A., Stetsenko, S.P., Vasilenko, R.L., Malykhin, D.G., Stoyev, P.I., Khovrich, S.V., Trembach, O.V., Kovtun, K.V.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2020
Schlagworte:	Physics and the technology of construction materials
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/194745
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Intense plastic deformation of high-purity cast beryllium / A.A. Vasil’ev, S.P. Stetsenko, R.L. Vasilenko, D.G. Malykhin, P.I. Stoyev, S.V. Khovrich, O.V. Trembach. K.V. Kovtun // Problems of atomic science and tecnology. — 2020. — № 1. — С. 230-235. — Бібліогр.: 11 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

V International scientific conference «High-purity materials: preparation, applications, properties»
Veröffentlicht: (2020)

Production of high-purity zinc single crystals by vertical directed crystallization method
von: Shcherban, A.P., et al.
Veröffentlicht: (2020)

Mineral insulators for kompton detectors of neutrons with a metal hafnium emitter
von: Bohdan, E.A., et al.
Veröffentlicht: (2020)

Facility for hydrogenation and thermal testing of internally pressurized dummy fuel rods
von: Dolgiy, V.A., et al.
Veröffentlicht: (2020)

Investigation into hydride reorientation in dummy fuel rod cladding (Zr-1%Nb) under internal pressure during testing simulating SNF handling and accidents with limiting cladding heating up to 410 °С
von: Riedkina, G.P., et al.
Veröffentlicht: (2020)

Studies of the features of the sorption of an europium by natural and synthetic zeolites for using it in the nuclear energy
von: Levenets, V.V., et al.
Veröffentlicht: (2020)

Current state of methods for low–dense constructional composite materials producing (overview)
von: Shcherbakova, E.P., et al.
Veröffentlicht: (2020)

Nuclear zirconium – the basis of alloys with improved neutron-physical, radiation, and corrosion properties
von: Mukhachev, A.P., et al.
Veröffentlicht: (2020)

Effect of electronic radiation on the evolution of nanostructure and creep of Zr at the temperature of 670 K
von: Karaseva, E.V., et al.
Veröffentlicht: (2020)

Research of the thermal desorption processes in oxide mixtures at laser effect
von: Katrechko, V.V., et al.
Veröffentlicht: (2020)

Investigation on corrosion properties of carbon-carbon composites
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)

Experimental study on radioactive waste immobilization in low-temperature magnesium-potassium phosphate ceramic matrix
von: Sayenko, S.Yu., et al.
Veröffentlicht: (2020)

Zone for collecting the ions of a given mass range in the plasma filter of masses
von: Katrechko, V.V., et al.
Veröffentlicht: (2020)

Application of interval analysis for improving reliability of estimation of hardness value spread for nuclear structural materials
von: Yefimov, A.V., et al.
Veröffentlicht: (2020)

Suppression of segregation and control of the structure of ingots and casting
von: Shapovalov, V.O., et al.
Veröffentlicht: (2020)

The microplasma aluminum and titanium oxidation in condensed environments
von: Vinnikov, D.V., et al.
Veröffentlicht: (2020)

Peculiarities of kinetic and mechanical properties of high-entropy alloy Аl₀.₅CoCuCrNiFe in range ~ 300…77 К
von: Voyevodin, V.N., et al.
Veröffentlicht: (2020)

Assessment of impacting the thin protective coatings on the stress–strain state of the cladding of fuel rods of nuclear reactors
von: Povolotskii, E.V., et al.
Veröffentlicht: (2020)

Improving the efficiency of the unit of the Zaporizhzhia NPP with a WWER–1000 reactor
von: Cheilytko, A.A., et al.
Veröffentlicht: (2020)

Modification of the aluminum alloy by the radiation and mechanical treatment
von: Donets, S.E., et al.
Veröffentlicht: (2020)

Synthesis of hydrogen storage materials in a Ti-Zr-Ni system using the hydride cycle technology during dehydrogenation by an electron beam in a vacuum
von: Dmytrenko, O.E., et al.
Veröffentlicht: (2020)

Electron irradiation, temperature, and stress effect on corrosion of Zr-, Ni-Cr-, and Fe-Cr-based alloys in the vicinity of the water coolant supercritical transition
von: Bakai, O.S., et al.
Veröffentlicht: (2020)

Components of automated intellectual systems supporting decisions at the stage of operation and equipment diagnostics of nuclear power units
von: Yefimov, О.V., et al.
Veröffentlicht: (2020)

Elastic interaction energy of point defects with a basal dislocation loop in zirconium
von: Trotsenko, O.G., et al.
Veröffentlicht: (2020)

Influencing of thin protective coatings on natural frequencies of radial oscillations of claddings of fuel rods of nuclear reactors
von: Mazurenko, Yu.E., et al.
Veröffentlicht: (2020)

Strengthening of the surface of steel (9XФМ) exposed to a high-current electron beam
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2020)

Basic approaches to the choice of material for working blades of the last stages of the LPC of powerful steam turbines
von: Slaston, L.O., et al.
Veröffentlicht: (2020)

Analyses of structure phase stability of U-Mo target of the neutron source
von: Borts, B.V., et al.
Veröffentlicht: (2020)

Influence of mechanical-thermal treatment on the microstructure and current-carrying capacity of Nb-Ti-superconductor
von: Storozhilov, G.E., et al.
Veröffentlicht: (2020)

Concomitant extraction process of niobium at the titanium tetrachloride production
von: Sarsembekov, Т.К., et al.
Veröffentlicht: (2020)

Multi-group modeling of protection against neutron and gamma radiation by materials based on titanium hydride
von: Yastrebinsky, R.N., et al.
Veröffentlicht: (2020)

Influence of purity on microstructure and strength characteristics of refrigable microcomposites
von: Azarenkov, N.A., et al.
Veröffentlicht: (2020)

The &quot;magnetic memory&quot; effects in high-purity beryllium
von: Ye. I. Kurek, et al.
Veröffentlicht: (2016)

Strain hardening of flat samples of two–dimensional high purity Al polycrystals
von: Badiyan, E.E., et al.
Veröffentlicht: (2020)

Features of formation of crystallographic texture and properties in Ti-3Al-2.5V titanium alloy during tubes manufacture
von: Vakhrusheva, V.S., et al.
Veröffentlicht: (2019)

Electrode processes in electrolysis of zirconium at production of plastic zirconium for nuclear energy
von: Mukhachev, A.P., et al.
Veröffentlicht: (2019)

Development of plastic deformation in two-dimensional copper polycrystals with different twin structure
von: Ftomov, Ye.V., et al.
Veröffentlicht: (2022)

Research by direct methods of the base metal of main circulation pipeline of the power unit 3 of the south ukraine NPP after 200 thousand hours of operation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2022)

Crystal lattice rotations during plastic deformation of two–dimensional polycrystalline Al samples
von: Badiyan, E.E., et al.
Veröffentlicht: (2020)

Formation of plastic properties of 12Cr18Ni10Ti steel highly irradiated by neutrons
von: Maksimkin, О.P., et al.
Veröffentlicht: (2021)