Buchumschlag

Study of the process of thermal dissociation of tantal pentachloride in vacuum

The dependence of the degree of dissociation of TaCl₅α(T, P) vapors on the temperature in the range of 1470...1820 K in a vacuum of 1.33·10⁻² Pa was by using of equilibrium chemical thermodynamics obtained. The experimental data on the dependence of αex(Т, Р) on temperature and vapor mass flow TaCl₅...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Вопросы атомной науки и техники
Datum:	2019
Hauptverfasser:	Polyakov, Yu.I., Rudenkyi, S.G., Lukirsky, Yu.V., Konovalov, I.I., Rak, V.I.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2019
Schlagworte:	Physics of radiotechnology and ion-plasma technologies
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/194942
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Study of the process of thermal dissociation of tantal pentachloride in vacuum / Yu.I. Polyakov, S.G. Rudenkyi, Yu.V. Lukirsky, I.I. Konovalov, V.I. Rak // Problems of atomic science and technology. — 2019. — № 2. — С. 141-144. — Бібліогр.: 6 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Vacuum CVD coatings Ta on target W plate of neutrons source
von: Borts, B.V., et al.
Veröffentlicht: (2019)

Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
von: Kuprin, A.S., et al.
Veröffentlicht: (2019)

The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
von: Sobol', O.V., et al.
Veröffentlicht: (2019)

Digital processing of optical emission spectra of magnetron sputtering plasma system
von: Afanasіeva, I.A., et al.
Veröffentlicht: (2019)

Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
von: Chabak, Yu.G., et al.
Veröffentlicht: (2019)

Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
von: Kovalenko, V.I., et al.
Veröffentlicht: (2019)

Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
von: Bovda, V.A., et al.
Veröffentlicht: (2019)

Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
von: Belous, V.А., et al.
Veröffentlicht: (2019)

Pure iron and nickel for new structural reactor materials
von: Pylypenko, M.M., et al.
Veröffentlicht: (2019)

Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)

Hardening of leading edges of turbine blades by electrospark alloying
von: Kalinina, N.E., et al.
Veröffentlicht: (2019)

Extracting of rare earth metals from secondary raw materials
von: Kolobov, G., et al.
Veröffentlicht: (2019)

Structural engineering of NbN/Cu multilayer coatings by changing the thickness of the layers and the magnitude of the bias potential during deposition
von: Sobol’, O.V., et al.
Veröffentlicht: (2019)

Kinetic regularities of the formation of gas products under the influence of ionizing radiation on biomass
von: Khalilov, Z.Z., et al.
Veröffentlicht: (2019)

Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2019)

Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)

Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)

Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)

Structure and corrosion resistance of vacuum-arc multi-period CrN/Cu, ZrN/Cu, and NbN/Cu coatings
von: Postelnyk, H.O., et al.
Veröffentlicht: (2020)

Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)

Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
von: Kuprin, A.S., et al.
Veröffentlicht: (2023)

Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)

Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)

Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)

Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
von: Belous, V.A., et al.
Veröffentlicht: (2021)

Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
von: Gurin, I.V., et al.
Veröffentlicht: (2022)

Creation of various structures, including nanometer scale, and investigation of mechanical and dissipative properties of VT6 titanium alloy
von: Sokolenko, V.I., et al.
Veröffentlicht: (2022)

Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)

Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)

Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)

Effect of nitrogen pressure on the structural and mechanical properties of V-Mo-N coatings deposited by cathodic arc evaporation
von: Kuprin, A.S., et al.
Veröffentlicht: (2022)

Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)

Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
von: Sereda, B., et al.
Veröffentlicht: (2023)

Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis
von: Sereda, B., et al.
Veröffentlicht: (2023)

Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)

Structural features of chromium carbide coatings obtained by the MOCVD method from the COL "BARKHOS"
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)

Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)

CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)

Use of detonation sputtering to increase the durability of hydraulic hammer critical parts
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)

Optimization of use conditions for cathodic arc nickel coating doped with phosphorus
von: Lapitskaya, V.A., et al.
Veröffentlicht: (2021)