Pure iron and nickel for new structural reactor materials
The refining processes of iron and nickel from metal and gas impurities by physical methods in vacuum are considered. The effectiveness of using electron-beam melting for purification of these metals is shown. Iron and nickel in a purity of more than 99.98 and 99.994 wt.% respectively have been prod...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2019 |
| Main Authors: | Pylypenko, M.M., Stadnik, Yu.S., Drobyshevska, A.O. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2019
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/194951 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Pure iron and nickel for new structural reactor materials / M.M. Pylypenko, Yu.S. Stadnik, A.O. Drobyshevska // Problems of atomic science and technology. — 2019. — № 2. — С. 159-163. — Бібліогр.: 10 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components
by: Prokhorenko, E.M., et al.
Published: (2019)
by: Prokhorenko, E.M., et al.
Published: (2019)
Extracting of rare earth metals from secondary raw materials
by: Kolobov, G., et al.
Published: (2019)
by: Kolobov, G., et al.
Published: (2019)
Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
by: Chabak, Yu.G., et al.
Published: (2019)
by: Chabak, Yu.G., et al.
Published: (2019)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
by: Novikov, V.Yu., et al.
Published: (2019)
by: Novikov, V.Yu., et al.
Published: (2019)
Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
by: Bovda, V.A., et al.
Published: (2019)
by: Bovda, V.A., et al.
Published: (2019)
Structural engineering of NbN/Cu multilayer coatings by changing the thickness of the layers and the magnitude of the bias potential during deposition
by: Sobol’, O.V., et al.
Published: (2019)
by: Sobol’, O.V., et al.
Published: (2019)
The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
by: Sobol', O.V., et al.
Published: (2019)
by: Sobol', O.V., et al.
Published: (2019)
Kinetic regularities of the formation of gas products under the influence of ionizing radiation on biomass
by: Khalilov, Z.Z., et al.
Published: (2019)
by: Khalilov, Z.Z., et al.
Published: (2019)
Vacuum CVD coatings Ta on target W plate of neutrons source
by: Borts, B.V., et al.
Published: (2019)
by: Borts, B.V., et al.
Published: (2019)
Digital processing of optical emission spectra of magnetron sputtering plasma system
by: Afanasіeva, I.A., et al.
Published: (2019)
by: Afanasіeva, I.A., et al.
Published: (2019)
Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
by: Kovalenko, V.I., et al.
Published: (2019)
by: Kovalenko, V.I., et al.
Published: (2019)
Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
by: Belous, V.А., et al.
Published: (2019)
by: Belous, V.А., et al.
Published: (2019)
Hardening of leading edges of turbine blades by electrospark alloying
by: Kalinina, N.E., et al.
Published: (2019)
by: Kalinina, N.E., et al.
Published: (2019)
Study of the process of thermal dissociation of tantal pentachloride in vacuum
by: Polyakov, Yu.I., et al.
Published: (2019)
by: Polyakov, Yu.I., et al.
Published: (2019)
Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
by: Kuprin, A.S., et al.
Published: (2019)
by: Kuprin, A.S., et al.
Published: (2019)
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Optimization of use conditions for cathodic arc nickel coating doped with phosphorus
by: Lapitskaya, V.A., et al.
Published: (2021)
by: Lapitskaya, V.A., et al.
Published: (2021)
Influence of iron additives on the corrosion resistance of the Zr-1%Nb alloy under operating conditions of a nuclear reactor
by: Pylypenko, M.M., et al.
Published: (2022)
by: Pylypenko, M.M., et al.
Published: (2022)
Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
by: Kuprin, A.S., et al.
Published: (2023)
by: Kuprin, A.S., et al.
Published: (2023)
Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
by: Gurin, I.V., et al.
Published: (2022)
by: Gurin, I.V., et al.
Published: (2022)
Pure hafnium for nuclear power
by: Pylypenko, M.M., et al.
Published: (2020)
by: Pylypenko, M.M., et al.
Published: (2020)
Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
by: Sereda, B., et al.
Published: (2023)
by: Sereda, B., et al.
Published: (2023)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
by: Gribanov, Yu.A., et al.
Published: (2020)
by: Gribanov, Yu.A., et al.
Published: (2020)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
by: Shirokov, B.M., et al.
Published: (2022)
by: Shirokov, B.M., et al.
Published: (2022)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020)
by: Belous, V.А., et al.
Published: (2020)
Structural features of chromium carbide coatings obtained by the MOCVD method from the COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
by: Sukhova, O.V.
Published: (2020)
by: Sukhova, O.V.
Published: (2020)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021)
by: Vasilenko, R.L., et al.
Published: (2021)
Creation of various structures, including nanometer scale, and investigation of mechanical and dissipative properties of VT6 titanium alloy
by: Sokolenko, V.I., et al.
Published: (2022)
by: Sokolenko, V.I., et al.
Published: (2022)
Effect of nitrogen pressure on the structural and mechanical properties of V-Mo-N coatings deposited by cathodic arc evaporation
by: Kuprin, A.S., et al.
Published: (2022)
by: Kuprin, A.S., et al.
Published: (2022)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
by: Sobol, O.V., et al.
Published: (2020)
by: Sobol, O.V., et al.
Published: (2020)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
by: Koshevoy, K.I., et al.
Published: (2021)
by: Koshevoy, K.I., et al.
Published: (2021)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Structure and corrosion resistance of vacuum-arc multi-period CrN/Cu, ZrN/Cu, and NbN/Cu coatings
by: Postelnyk, H.O., et al.
Published: (2020)
by: Postelnyk, H.O., et al.
Published: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
by: Levenets, V.V., et al.
Published: (2022)
by: Levenets, V.V., et al.
Published: (2022)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
by: Vahrusheva, V.S., et al.
Published: (2022)
by: Vahrusheva, V.S., et al.
Published: (2022)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
by: Rudenkyi, S.G., et al.
Published: (2020)
by: Rudenkyi, S.G., et al.
Published: (2020)
Similar Items
-
Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components
by: Prokhorenko, E.M., et al.
Published: (2019) -
Extracting of rare earth metals from secondary raw materials
by: Kolobov, G., et al.
Published: (2019) -
Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
by: Chabak, Yu.G., et al.
Published: (2019) -
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
by: Novikov, V.Yu., et al.
Published: (2019) -
Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
by: Bovda, V.A., et al.
Published: (2019)