Buchumschlag

Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components

The dependence of the hardness of polystyrene-metal composite materials on the homogeneity of the distribution of particles of a component over the volume of a composite material is investigated. Improvements are made to thermoplastic-automata, which make it possible to improve the quality of compos...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Вопросы атомной науки и техники
Datum:	2019
Hauptverfasser:	Prokhorenko, E.M., Lytvynenko, V.V., Zakharchenko, A.A., Khazhmuradov, M.A., Prokhorenko, T.G.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2019
Schlagworte:	Physics of radiotechnology and ion-plasma technologies
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/194953
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components / E.M. Prokhorenko, V.V. Lytvynenko, A.A. Zakharchenko, M.A. Khazhmuradov, T.G. Prokhorenko // Problems of atomic science and technology. — 2019. — № 2. — С. 121-126. — Бібліогр.: 12 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Kinetic regularities of the formation of gas products under the influence of ionizing radiation on biomass
von: Khalilov, Z.Z., et al.
Veröffentlicht: (2019)

Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
von: Kovalenko, V.I., et al.
Veröffentlicht: (2019)

The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
von: Sobol', O.V., et al.
Veröffentlicht: (2019)

Hardening of leading edges of turbine blades by electrospark alloying
von: Kalinina, N.E., et al.
Veröffentlicht: (2019)

Digital processing of optical emission spectra of magnetron sputtering plasma system
von: Afanasіeva, I.A., et al.
Veröffentlicht: (2019)

Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
von: Bovda, V.A., et al.
Veröffentlicht: (2019)

Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
von: Kuprin, A.S., et al.
Veröffentlicht: (2019)

Pure iron and nickel for new structural reactor materials
von: Pylypenko, M.M., et al.
Veröffentlicht: (2019)

Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)

Vacuum CVD coatings Ta on target W plate of neutrons source
von: Borts, B.V., et al.
Veröffentlicht: (2019)

Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
von: Belous, V.А., et al.
Veröffentlicht: (2019)

Study of the process of thermal dissociation of tantal pentachloride in vacuum
von: Polyakov, Yu.I., et al.
Veröffentlicht: (2019)

Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
von: Chabak, Yu.G., et al.
Veröffentlicht: (2019)

Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)

Metal containing composition materials for radiation protection
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2014)

CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)

Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)

Study of nanomodification of nickel alloy GS3 with titanium carbide
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)

Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)

Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)

Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)

Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
von: Warcholinski, B., et al.
Veröffentlicht: (2022)

Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
von: Belous, V.A., et al.
Veröffentlicht: (2021)

Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)

Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)

Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)

Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)

Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)

Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)

Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)

Structure and properties of coatings based on FeCrAl and Cr18Ni10T
von: Belous, V.А., et al.
Veröffentlicht: (2020)

Structure and properties of powder gas-plasma coatings based on nickel
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)

Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)

Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
von: Sereda, B., et al.
Veröffentlicht: (2023)

Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)

Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
von: Sukhova, O.V.
Veröffentlicht: (2020)

Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
von: Воеводин, В.Н., et al.
Veröffentlicht: (2021)

Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
von: Krivchik, L., et al.
Veröffentlicht: (2021)