Buchumschlag

Extracting of rare earth metals from secondary raw materials

A review of new publications on rare earth extraction technologies from various types of secondary raw materials: permanent magnet scrap made of Nd₂Fe₁₄B alloy and nickel-metal hydride batteries, spent catalysts, electronics scrap, waste luminophores and scrap fluorescent lamps. Дано огляд нових пуб...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Вопросы атомной науки и техники
Datum:	2019
Hauptverfasser:	Kolobov, G., Pavlov, V., Pecherytsya, K., Moseiko, Yu., Lichkonenko, N., Prochorova, А.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2019
Schlagworte:	Physics of radiotechnology and ion-plasma technologies
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/194955
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Extracting of rare earth metals from secondary raw materials / G. Kolobov, V. Pavlov, K. Pecherytsya, Yu. Moseiko, N. Lichkonenko, А. Prochorova // Problems of atomic science and technology. — 2019. — № 2. — С. 136-140. — Бібліогр.: 33 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
von: Bovda, V.A., et al.
Veröffentlicht: (2019)

Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2019)

Pure iron and nickel for new structural reactor materials
von: Pylypenko, M.M., et al.
Veröffentlicht: (2019)

Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
von: Chabak, Yu.G., et al.
Veröffentlicht: (2019)

Kinetic regularities of the formation of gas products under the influence of ionizing radiation on biomass
von: Khalilov, Z.Z., et al.
Veröffentlicht: (2019)

Digital processing of optical emission spectra of magnetron sputtering plasma system
von: Afanasіeva, I.A., et al.
Veröffentlicht: (2019)

Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)

Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
von: Kovalenko, V.I., et al.
Veröffentlicht: (2019)

Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
von: Belous, V.А., et al.
Veröffentlicht: (2019)

Hardening of leading edges of turbine blades by electrospark alloying
von: Kalinina, N.E., et al.
Veröffentlicht: (2019)

The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
von: Sobol', O.V., et al.
Veröffentlicht: (2019)

Study of the process of thermal dissociation of tantal pentachloride in vacuum
von: Polyakov, Yu.I., et al.
Veröffentlicht: (2019)

Vacuum CVD coatings Ta on target W plate of neutrons source
von: Borts, B.V., et al.
Veröffentlicht: (2019)

Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
von: Kuprin, A.S., et al.
Veröffentlicht: (2019)

Structural engineering of NbN/Cu multilayer coatings by changing the thickness of the layers and the magnitude of the bias potential during deposition
von: Sobol’, O.V., et al.
Veröffentlicht: (2019)

Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Secondary raw materials of radioactive metals
von: Kolobov, G.A., et al.
Veröffentlicht: (2019)

CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)

Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
von: Gurin, I.V., et al.
Veröffentlicht: (2022)

Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
von: Sereda, B., et al.
Veröffentlicht: (2023)

Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)

Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
von: Sukhova, O.V.
Veröffentlicht: (2020)

Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)

Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)

Study of nanomodification of nickel alloy GS3 with titanium carbide
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)

Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)

Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
von: Belous, V.A., et al.
Veröffentlicht: (2021)

Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)

Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)

Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)

Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
von: Воеводин, В.Н., et al.
Veröffentlicht: (2021)

Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
von: Krivchik, L., et al.
Veröffentlicht: (2021)

Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)

Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)

Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)

Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)

Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)

Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)

Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)