Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
Protective coatings with different compositions of Fe, Cr, and Al were deposited by cathodic arc evaporation method on fragments of Zr1Nb alloy fuel claddings. The influence of the composition and structural state of the developed coatings on their physical and mechanical properties (microhardness,...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2021 |
| Main Authors: | Vasilenko, R.L., Voyevodin, V.N., Belous, V.А., Bortnitskaya, М.A., Kolodiy, І.V., Klimenko, І.О., Ovcharenko, V.D., Kovalenko, V.І., Marinin, V.G., Ilchenko, A.V., Tikhonovsky, М.А., Kuprin, A.S. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2021
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/194960 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation / R.L. Vasilenko, V.N. Voyevodin, V.А. Belous, М.A. Bortnitskaya, І.V. Kolodiy, І.О. Klimenko, V.D. Ovcharenko, V.І. Kovalenko, V.G. Marinin, A.V. Ilchenko, М.А. Tikhonovsky, A.S. Kuprin // Problems of Atomic Science and Technology. — 2021. — № 2. — С. 119-128. — Бібліогр.: 29 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020)
by: Belous, V.А., et al.
Published: (2020)
Surface morphology and sputtering of FeCrAl coating on steel exposed to low-energy deuterium plasmas
by: Voyevodin, V.N., et al.
Published: (2019)
by: Voyevodin, V.N., et al.
Published: (2019)
Corrosion resistance of VC–FeCr and VC–FeCrSo coatings obtained by supersonic gas-flame spraying
by: M. M. Student, et al.
Published: (2018)
by: M. M. Student, et al.
Published: (2018)
Optimization of conductive monotectic Cu-(FeCr-C) alloys composition
by: V. V. Khristenko, et al.
Published: (2015)
by: V. V. Khristenko, et al.
Published: (2015)
Structure and wear resistance of VC–FeCr and VC–FeCrCo coatings obtained by supersonic gas-flame spraying
by: M. M. Student, et al.
Published: (2018)
by: M. M. Student, et al.
Published: (2018)
Структура литого композиційного матеріалу системи [Al – FeCr], отриманого з використанням дисперснонаповненої моделі, що газифікується
by: Небожак, І. А., et al.
Published: (2023)
by: Небожак, І. А., et al.
Published: (2023)
High-entropy AlCoFeCrVNi and AlCoFeCrVTi alloys obtained by mechanical alloying and subsequent sintering
by: V. V. Cherniavskyi, et al.
Published: (2018)
by: V. V. Cherniavskyi, et al.
Published: (2018)
Mechanical properties of AlCoFeCrVNi and AlCoFeCrVTi highentropy lloys obtained by sintering under pressure
by: O. I. Yurkova, et al.
Published: (2019)
by: O. I. Yurkova, et al.
Published: (2019)
Високоентропійні AlCoFeCrVNi та AlCoFeCrVTi сплави, отримані механічним легуванням і наступним спіканням
by: Cherniavskyi, V. V., et al.
Published: (2018)
by: Cherniavskyi, V. V., et al.
Published: (2018)
Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
by: Kolodiy, I.V., et al.
Published: (2021)
by: Kolodiy, I.V., et al.
Published: (2021)
The features of structure formation at synthesis of high entropy alloys of Al – Cr – Fe – Ni – Cu, Al – Ti – Cr – Fe – Ni – Cu and Ti – Cr – Fe – Ni – Cu systems by means of powder metallurgy
by: H. A. Bahliuk, et al.
Published: (2015)
by: H. A. Bahliuk, et al.
Published: (2015)
Electronic properties of AlN crystal doped with Cr, Mn and Fe
by: Syrotyuk, S.V., et al.
Published: (2013)
by: Syrotyuk, S.V., et al.
Published: (2013)
Structure and mechanical properties of high-entropy AlCuNiFeCr and AlCuNiFeCrTi coatings obtained by electron beam surfacing
by: O. I. Yurkova, et al.
Published: (2017)
by: O. I. Yurkova, et al.
Published: (2017)
Влияние плазменных вакуумно-дуговых покрытий CrN, CrAl и Al₂O₃ на процесс насыщения дейтерием сплава Zr + 1 % Nb
by: Бартак, В.А., et al.
Published: (2016)
by: Бартак, В.А., et al.
Published: (2016)
Features of Current—Voltage Characteristics of F/I/S Co2CrAl—I—Pb Heterostructures
by: E. M. Rudenko, et al.
Published: (2011)
by: E. M. Rudenko, et al.
Published: (2011)
Особенности вольт-амперных характеристик гетероструктур F/I/S Co₂CrAl—I—Pb
by: Руденко, Э.М., et al.
Published: (2011)
by: Руденко, Э.М., et al.
Published: (2011)
Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури
by: Небожак, І.А., et al.
Published: (2023)
by: Небожак, І.А., et al.
Published: (2023)
The effect OF Cr, Cr-N and Cr-Ox coatings on deuterium retention and penetration in zirconium alloy Zr-1Nb
by: Kopanetz, I.E., et al.
Published: (2015)
by: Kopanetz, I.E., et al.
Published: (2015)
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
by: Warcholinski, B., et al.
Published: (2022)
by: Warcholinski, B., et al.
Published: (2022)
Вольт-амперные характеристики низкоомных туннельных структур ферромагнетик–изолятор–сверхпроводник Co₂CrAl–I–Pb
by: Руденко, Э.М., et al.
Published: (2013)
by: Руденко, Э.М., et al.
Published: (2013)
Wear resistance of Fe-Cr–Mn–Ti–Al coatings sprayed by powder wires
by: L. I. Bohun, et al.
Published: (2019)
by: L. I. Bohun, et al.
Published: (2019)
The role of technological process in structural performances of quasi-crystalline Al–Fe–Cr alloy
by: O. V. Byakova, et al.
Published: (2020)
by: O. V. Byakova, et al.
Published: (2020)
Вплив параметрів мікроструктури литого композиційного матеріалу системи [Al – FeCr], отриманого у «порожнині» ливарної форми за ЛГМ-процесом, на його механічні характеристики
by: Небожак, І. А., et al.
Published: (2023)
by: Небожак, І. А., et al.
Published: (2023)
Effect of carbon on the properties of CrN coatings formed by cathodic arc evaporation in stationary system
by: Kuprin, A.S., et al.
Published: (2016)
by: Kuprin, A.S., et al.
Published: (2016)
Producing of thick vacuum condensates of high-entropic alloys CrFeCoNiCu and AlCrFeCoNiCu by the method of electron beam deposition
by: A. I. Ustinov, et al.
Published: (2019)
by: A. I. Ustinov, et al.
Published: (2019)
Hardening of Cr-Fe-Ni-Mn high-entropy alloys caused by the irradiation with argon ions
by: Tolstolutskaya, G.D., et al.
Published: (2017)
by: Tolstolutskaya, G.D., et al.
Published: (2017)
Removal of Cr(VI) from aqueous solutions by calcined Zn/Al- and Mg/Fe-hydrotalcites
by: G. N. Pshinko, et al.
Published: (2014)
by: G. N. Pshinko, et al.
Published: (2014)
Характер зв’язку армуючої фази з матрицею в литому композиційному матеріалі системи [Al – FeCr] та механізм процесу армування ливарних Al-сплавів за ЛГМ-процесом
by: Небожак, Іван, et al.
Published: (2023)
by: Небожак, Іван, et al.
Published: (2023)
Strain sensitivity effect in double-layered Cu/Cr and Fe/Cr films
by: D. V. Velikodnyj, et al.
Published: (2008)
by: D. V. Velikodnyj, et al.
Published: (2008)
Тензоэффект в двухслойных пленках Cu/Cr и Fe/Cr
by: Великодный, Д.В., et al.
Published: (2008)
by: Великодный, Д.В., et al.
Published: (2008)
Current-voltage characteristics of low-resistance tunnel structures ferromagnet–isolator–super-conductor Co2CrAl–I–Pb
by: E. M. Rudenko, et al.
Published: (2013)
by: E. M. Rudenko, et al.
Published: (2013)
Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
by: V. M. Nadutov, et al.
Published: (2016)
by: V. M. Nadutov, et al.
Published: (2016)
Ultrasonic study of as-cast heterogeneous high-entropy alloy AlCuCrCoNiFe
by: Nadutov, V.M., et al.
Published: (2016)
by: Nadutov, V.M., et al.
Published: (2016)
Термостабильность структуры и механических свойств наноквазикристаллического Al₉₄Fe₃Cr₃-сплава, консолидированного экструзией
by: Бякова, А.В., et al.
Published: (2015)
by: Бякова, А.В., et al.
Published: (2015)
Study of Ordering in Fe—25%Al—Cr Alloys by Dilatometry, Heat Flow and Mechanical Spectroscopy
by: Z. Belamri, et al.
Published: (2013)
by: Z. Belamri, et al.
Published: (2013)
Study of Ordering in Fe—25%Al—Cr Alloys by Dilatometry, Heat Flow and Mechanical Spectroscopy
by: Belamri, Z., et al.
Published: (2013)
by: Belamri, Z., et al.
Published: (2013)
Optimization of chromium content in powder wires Fe–Cr–C, Fe–Cr–B by corrosion resistance of electric arc coatings
by: T. R. Stupnytskyi, et al.
Published: (2016)
by: T. R. Stupnytskyi, et al.
Published: (2016)
Formation of Structure and Phase Composition of Nanocrystalline CuNiAlFeCr Alloy by the Mechanical Alloying Method
by: A. I. Jurkova, et al.
Published: (2014)
by: A. I. Jurkova, et al.
Published: (2014)
High-entropy AlCoNiFeCrTiVx coatings obtained by electron-beam cladding
by: O. I. Yurkova, et al.
Published: (2019)
by: O. I. Yurkova, et al.
Published: (2019)
Високоентропійні AlCоNiFeCrTiVx покриття, отримані електронно-променевим наплавленням
by: Yurkova, А., et al.
Published: (2019)
by: Yurkova, А., et al.
Published: (2019)
Similar Items
-
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020) -
Surface morphology and sputtering of FeCrAl coating on steel exposed to low-energy deuterium plasmas
by: Voyevodin, V.N., et al.
Published: (2019) -
Corrosion resistance of VC–FeCr and VC–FeCrSo coatings obtained by supersonic gas-flame spraying
by: M. M. Student, et al.
Published: (2018) -
Optimization of conductive monotectic Cu-(FeCr-C) alloys composition
by: V. V. Khristenko, et al.
Published: (2015) -
Structure and wear resistance of VC–FeCr and VC–FeCrCo coatings obtained by supersonic gas-flame spraying
by: M. M. Student, et al.
Published: (2018)