Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
The reliability of the vane apparatus of steam turbines largely determines the operation of the turbine as a whole. The results of scientific research indicate that the surface operation of the blades in the wet-steam flow is caused by a combination of corrosion and drip erosion. The presence of che...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2021 |
| Main Authors: | Hlushkova, D.B., Bahrov, V.A., Hrinchenko, O.D., Hnatiuk, A.A., Kalinina, N.E., Kalinin, V.T. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2021
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/194963 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades / D.B. Hlushkova, V.A. Bahrov, O.D. Hrinchenko, A.A. Hnatiuk, N.E. Kalinina, V.T. Kalinin // Problems of Atomic Science and Technology. — 2021. — № 2. — С. 136-141. — Бібліогр.: 7 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Hardening of leading edges of turbine blades by electrospark alloying
by: Kalinina, N.E., et al.
Published: (2019)
by: Kalinina, N.E., et al.
Published: (2019)
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
by: Rudenkyi, S.G., et al.
Published: (2020)
by: Rudenkyi, S.G., et al.
Published: (2020)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
by: Vahrusheva, V.S., et al.
Published: (2022)
by: Vahrusheva, V.S., et al.
Published: (2022)
CT study of products from non-metallic composites reinforced by carbon fibers
by: Levenets, V.V., et al.
Published: (2022)
by: Levenets, V.V., et al.
Published: (2022)
Simulation of the Erosion-Corrosion Destruction Process of Steam Turbine Low-Pressure Cylinder Blades
by: O. L. Shubenko, et al.
Published: (2023)
by: O. L. Shubenko, et al.
Published: (2023)
Simulation of the Erosion-Corrosion Destruction Process of Steam Turbine Low-Pressure Cylinder Blades
by: Шубенко, О. Л., et al.
Published: (2023)
by: Шубенко, О. Л., et al.
Published: (2023)
Simulation of the Erosion-Corrosion Destruction Process of Steam Turbine Low-Pressure Cylinder Blades
by: Шубенко, О. Л., et al.
Published: (2023)
by: Шубенко, О. Л., et al.
Published: (2023)
Heat treatment influence on the steel 15X11MF wear resistance
by: M. A. Pohribnyi, et al.
Published: (2014)
by: M. A. Pohribnyi, et al.
Published: (2014)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
by: Krivchik, L., et al.
Published: (2021)
by: Krivchik, L., et al.
Published: (2021)
Movement of charged particles in magnetic and nonuniform stochastic electric fields
by: Azarenkov, N.A., et al.
Published: (2021)
by: Azarenkov, N.A., et al.
Published: (2021)
On the possibility of obtaining a beam of heavy ions in the form of an “open umbrella” with subsequent deposition in the separator manifold
by: Yuferov, V.B., et al.
Published: (2023)
by: Yuferov, V.B., et al.
Published: (2023)
Electrochemical and Chemical Mechanisms of the Erosion-Corrosion Process of Wet-Steam Turbine Rotor Blades Destruction Under the Influence of Electrified Moisture
by: A. O. Tarelin, et al.
Published: (2021)
by: A. O. Tarelin, et al.
Published: (2021)
Modernization of the helium ion accelerator microwave power supply system
by: Gaponenko, N.I., et al.
Published: (2023)
by: Gaponenko, N.I., et al.
Published: (2023)
Express-method of evaluation of the influence of reinforcement corrosion on integrity of reinforced concrete
by: M. I. Hredil
Published: (2013)
by: M. I. Hredil
Published: (2013)
TiO₂-2 radiating damages as a result of the irradiation helium ions with energies of 0.12 and 4 MeV on the linear accelerator
by: Butenko, V.I., et al.
Published: (2023)
by: Butenko, V.I., et al.
Published: (2023)
Electrochemical and Chemical Mechanisms of the Erosion-Corrosion Process of Wet-Steam Turbine Rotor Blades Destruction Under the Influence of Electrified Moisture
by: Тарелин, А. А., et al.
Published: (2021)
by: Тарелин, А. А., et al.
Published: (2021)
Electrochemical and Chemical Mechanisms of the Erosion-Corrosion Process of Wet-Steam Turbine Rotor Blades Destruction Under the Influence of Electrified Moisture
by: Тарелин, А. А., et al.
Published: (2021)
by: Тарелин, А. А., et al.
Published: (2021)
Spatial separation of ions of a given mass range in the demo-imitation separator at the first turn of ionic trajectory
by: Katrechko, V.V., et al.
Published: (2021)
by: Katrechko, V.V., et al.
Published: (2021)
New concept of the main part of multicharged ions linear accelerator on the combined RF focusing basis
by: Tishkin, S.S., et al.
Published: (2023)
by: Tishkin, S.S., et al.
Published: (2023)
Vibrations of the steam turbine bladed disk subjected to the shroud parameters mistuning
by: A. A. Larin
Published: (2010)
by: A. A. Larin
Published: (2010)
Low-cycle fatigue and cracking resistance of power plant boiler pipes and steam lines of 12Kh1MF steel
by: Zelenskii, V.G., et al.
Published: (1985)
by: Zelenskii, V.G., et al.
Published: (1985)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
by: M. H. Shulzhenko, et al.
Published: (2021)
by: M. H. Shulzhenko, et al.
Published: (2021)
Modelling of Corrosion of the Burner Swirling Blades of the Boiler TPP-312
by: S. H. Kobzar, et al.
Published: (2019)
by: S. H. Kobzar, et al.
Published: (2019)
Effect of Blade Material of Steam Turbine Rotor on Aeroelastic Characteristics
by: Биков, Ю. А., et al.
Published: (2025)
by: Биков, Ю. А., et al.
Published: (2025)
Rotor blades efficiency increase at the last stage of steam turbines
by: Левченко, Е. В., et al.
Published: (2017)
by: Левченко, Е. В., et al.
Published: (2017)
Rotor blades efficiency increase at the last stage of steam turbines
by: Левченко, Е. В., et al.
Published: (2017)
by: Левченко, Е. В., et al.
Published: (2017)
Effect of Blade Material of Steam Turbine Rotor on Aeroelastic Characteristics
by: Биков, Ю. А., et al.
Published: (2025)
by: Биков, Ю. А., et al.
Published: (2025)
Rotor blades efficiency increase at the last stage of steam turbines
by: E. V. Levchenko, et al.
Published: (2010)
by: E. V. Levchenko, et al.
Published: (2010)
Features of structure formation of surface layers with high content of boron on steel 15Kh11MF in the conditions of furnace and induction heating
by: S. A. Kniaziev
Published: (2020)
by: S. A. Kniaziev
Published: (2020)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
by: Shirokov, B.M., et al.
Published: (2022)
by: Shirokov, B.M., et al.
Published: (2022)
Peculiarities of the formation of a hardened layer during laser borinizing of piston rings
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Aeroelastic Characteristics of Rotor Blades of Last Stage of a Powerful Steam Turbine
by: L. V. Kolodiazhna, et al.
Published: (2023)
by: L. V. Kolodiazhna, et al.
Published: (2023)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
by: Sobol, O.V., et al.
Published: (2020)
by: Sobol, O.V., et al.
Published: (2020)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
by: Шульженко, Н. Г., et al.
Published: (2021)
by: Шульженко, Н. Г., et al.
Published: (2021)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
by: Шульженко, Н. Г., et al.
Published: (2021)
by: Шульженко, Н. Г., et al.
Published: (2021)
Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
by: Kuprin, A.S., et al.
Published: (2019)
by: Kuprin, A.S., et al.
Published: (2019)
Digital processing of optical emission spectra of magnetron sputtering plasma system
by: Afanasіeva, I.A., et al.
Published: (2019)
by: Afanasіeva, I.A., et al.
Published: (2019)
Similar Items
-
Hardening of leading edges of turbine blades by electrospark alloying
by: Kalinina, N.E., et al.
Published: (2019) -
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023) -
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023) -
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022) -
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
by: Rudenkyi, S.G., et al.
Published: (2020)