Swelling prediction of AISI 304 and 18Cr10NiTi austenitic stainless steels using various empirical functions
A review of the known empirical dependences of austenitic steel swelling on in-reactor environments is carried out. The performance of empirical functions is compared in application to the conditions of thermal neutron reactor internals. Comparison with experimental data is made, and the influence o...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2022 |
| ISSN: | 1562-6016 |
| Main Authors: | Kalchenko, A.S., Lazarev, N.P. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/195416 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Swelling prediction of AISI 304 and 18Cr10NiTi austenitic stainless steels using various empirical functions / A.S. Kalchenko, N.P. Lazarev // Problems of Atomic Science and Technology. — 2022. — № 4. — С. 25-32. — Бібліогр.: 23 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
The influence of 18Cr10NiTi and ODS 18Cr10NiTi austenitic stainless steels microstructure on the deuterium desorption
by: Kalchenko, A.S., et al.
Published: (2020)
by: Kalchenko, A.S., et al.
Published: (2020)
Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
by: Tolstolutskaya, G.D., et al.
Published: (2020)
by: Tolstolutskaya, G.D., et al.
Published: (2020)
Effect of argon-ion irradiation on cavity formation in 18Cr10NiTi austenitic steel and its strengthened version
by: Kolodiy, I.V., et al.
Published: (2020)
by: Kolodiy, I.V., et al.
Published: (2020)
High-resolution transmission electron microscopy study of crystallography and morphology of TiC precipitates in argon-irradiated 18Cr10NiTi steel
by: Kalchenko, A.S., et al.
Published: (2021)
by: Kalchenko, A.S., et al.
Published: (2021)
Effect of grain boundary on the cavity formation behavior in 1.4 MeV Ar⁺ irradiated 18Cr10NiTi-ODS steel
by: Tolstolutskaya, G.D., et al.
Published: (2023)
by: Tolstolutskaya, G.D., et al.
Published: (2023)
Influence of environmental conditions on microstructure development and swelling in irradiated austenitic stainless steels
by: Voyevodin, V.N., et al.
Published: (2005)
by: Voyevodin, V.N., et al.
Published: (2005)
Comparative study of helium bubble formation in Cr-Fe-Ni-Mn high-entropy alloy and 18Cr10NiTi steel after irradiation and post-irradiation annealing
by: Kalchenko, А.S., et al.
Published: (2019)
by: Kalchenko, А.S., et al.
Published: (2019)
Swelling of ferritic structural materials at high levels of damage doses and gas concentrations
by: Vasilenko, R.L., et al.
Published: (2020)
by: Vasilenko, R.L., et al.
Published: (2020)
Helium release from 12Cr18Ni10Ti stainless steel after impact of steady-state glow discharge helium plasma
by: Glazunov, G.P., et al.
Published: (2021)
by: Glazunov, G.P., et al.
Published: (2021)
Diagnosis of damage in austenitic steel AISI 304 at mechanical loading by measurements of coercive force
by: O. P. Hopkalo, et al.
Published: (2019)
by: O. P. Hopkalo, et al.
Published: (2019)
Effect of Friction Time on Microstructure and Mechanical Properties of Friction Welded AISI 304 Stainless Steel to AISI 1060 Steel
by: H. Ates, et al.
Published: (2013)
by: H. Ates, et al.
Published: (2013)
Effect of Friction Time on Microstructure and Mechanical Properties of Friction Welded AISI 304 Stainless Steel to AISI 1060 Steel
by: Ates, H., et al.
Published: (2013)
by: Ates, H., et al.
Published: (2013)
The Fatigue Strength of AISI 430—304 Stainless Steels Welded by CO₂ Laser Beam Welding
by: Caligulu, U., et al.
Published: (2015)
by: Caligulu, U., et al.
Published: (2015)
Dynamics of the plasma electrolytic polishing process of austenitic steel AISI 304 in a solution of ammonium sulfate
by: Mihal, O.V., et al.
Published: (2018)
by: Mihal, O.V., et al.
Published: (2018)
The Fatigue Strength of AISI 430—304 Stainless Steels Welded by CO2 Laser Beam Welding
by: U. Caligulu, et al.
Published: (2015)
by: U. Caligulu, et al.
Published: (2015)
Effect of irradiation and thermo-induced processes on reactor in vessel elements during long-term operation
by: Breslavsky, D., et al.
Published: (2022)
by: Breslavsky, D., et al.
Published: (2022)
The Influence of Hydrogen Addition to Argon as a Shielding Gas on the Fatigue Performance of TIG Welded AISI 304 Stainless Steel
by: E. Gцzьtok, et al.
Published: (2013)
by: E. Gцzьtok, et al.
Published: (2013)
The Influence of Hydrogen Addition to Argon as a Shielding Gas on the Fatigue Performance of TIG Welded AISI 304 Stainless Steel
by: Gözütok, E., et al.
Published: (2013)
by: Gözütok, E., et al.
Published: (2013)
Mechanisms of radiation damage and development of structural materials for operating and advanced nuclear reactors
by: Voyevodin, V.N., et al.
Published: (2021)
by: Voyevodin, V.N., et al.
Published: (2021)
Effect of argon ion irradiation on hardening and microstructure of ferritic-martensitic steel T91
by: Voyevodin, V.N., et al.
Published: (2019)
by: Voyevodin, V.N., et al.
Published: (2019)
Analysis of structural transformations in natural quartzites under the influence of gamma irradiation
by: Bereznyak, E.P., et al.
Published: (2021)
by: Bereznyak, E.P., et al.
Published: (2021)
The short-range order and its influence on radiation stability of low-concentration Fe-Cr alloys
by: Petrenko, P.V., et al.
Published: (2021)
by: Petrenko, P.V., et al.
Published: (2021)
Effect of severe plastic deformation on radiation hardening of T91 ferritic-martensitic steel
by: Voyevodin, V.N., et al.
Published: (2021)
by: Voyevodin, V.N., et al.
Published: (2021)
Helium and hydrogen effects in structural materials for nuclear applications
by: Karpov, S.A., et al.
Published: (2022)
by: Karpov, S.A., et al.
Published: (2022)
Stress-strain state and wear modelling for fuel rod – grid contact
by: Breslavsky, D., et al.
Published: (2023)
by: Breslavsky, D., et al.
Published: (2023)
Comparative study of the effect of gamma-radiation on the structural and thermophysical properties of nitrile-butadiene rubber filled with different nanometal oxides
by: Khankishiyeva, R.F., et al.
Published: (2020)
by: Khankishiyeva, R.F., et al.
Published: (2020)
Tribological characteristics of 'steel-ceramics-irradiated-by-helium-ions' pair
by: Butenko, V.I., et al.
Published: (2021)
by: Butenko, V.I., et al.
Published: (2021)
Second-order phase transitions in crystalline media under the temperature effects
by: Borts, B.V., et al.
Published: (2022)
by: Borts, B.V., et al.
Published: (2022)
Theoretical evidence for stationary size distribution of oxide nanoparticles in dispersion strengthened steel under cascade producing irradiation
by: Borisenko, Alexander
Published: (2019)
by: Borisenko, Alexander
Published: (2019)
Production of molecular hydrogen formed by the thermal and radiation-thermal transformation of water in the nano-Si+H₂O system
by: Jafarov, J.D., et al.
Published: (2019)
by: Jafarov, J.D., et al.
Published: (2019)
Morphological characteristics of craters on the surface of AA1933 aluminum alloy irradiated by pulsed electron beam
by: Bryukhovetsky, V.V., et al.
Published: (2023)
by: Bryukhovetsky, V.V., et al.
Published: (2023)
Electrical properties of gamma-modified composites copolymer of polyvinylidene fluoride with tetrafluoroethylene and silicon
by: Nuruyev, I.M.
Published: (2019)
by: Nuruyev, I.M.
Published: (2019)
Radiation hardness of polysiloxane-based scintillators
by: Zhmurin, P.М., et al.
Published: (2022)
by: Zhmurin, P.М., et al.
Published: (2022)
The effect of the external medium on the structuralphase transformations of quartzite upon high-energy electron irradiation
by: Bereznyak, E.P., et al.
Published: (2019)
by: Bereznyak, E.P., et al.
Published: (2019)
Effect of γ-irradiation on the structure of high density polyethylene composites with GaAs and GaAs<Te> fillers
by: Gadzhieva, N.N., et al.
Published: (2020)
by: Gadzhieva, N.N., et al.
Published: (2020)
The influence of mass and size effects on the radiolysis process of water in the BeO/H₂O suspended system by the γ-quanta
by: Jafarov, Y.D.
Published: (2020)
by: Jafarov, Y.D.
Published: (2020)
Investigation of the radiation-thermal oxidation of beryllium in the system Be-water by the methods of infrared and optical spectroscopy
by: Gadzhieva, N.N., et al.
Published: (2023)
by: Gadzhieva, N.N., et al.
Published: (2023)
Direct martensitic transformations of low-carbon steels
by: Belykh, D.G., et al.
Published: (2023)
by: Belykh, D.G., et al.
Published: (2023)
High-entropy alloys as a prospective class of new radiation-tolerant materials research development analysis based on the information databases
by: Levenets, A.V., et al.
Published: (2021)
by: Levenets, A.V., et al.
Published: (2021)
Spherical standing burning wave with external automatic reactivity control
by: Leleko, Yu.Y., et al.
Published: (2019)
by: Leleko, Yu.Y., et al.
Published: (2019)
Similar Items
-
The influence of 18Cr10NiTi and ODS 18Cr10NiTi austenitic stainless steels microstructure on the deuterium desorption
by: Kalchenko, A.S., et al.
Published: (2020) -
Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
by: Tolstolutskaya, G.D., et al.
Published: (2020) -
Effect of argon-ion irradiation on cavity formation in 18Cr10NiTi austenitic steel and its strengthened version
by: Kolodiy, I.V., et al.
Published: (2020) -
High-resolution transmission electron microscopy study of crystallography and morphology of TiC precipitates in argon-irradiated 18Cr10NiTi steel
by: Kalchenko, A.S., et al.
Published: (2021) -
Effect of grain boundary on the cavity formation behavior in 1.4 MeV Ar⁺ irradiated 18Cr10NiTi-ODS steel
by: Tolstolutskaya, G.D., et al.
Published: (2023)