Optimization of use conditions for cathodic arc nickel coating doped with phosphorus
The results of tribological tests for a cathodic arc nickel coating doped with phosphorus are presented. The coating (thickness of 2 μm) is applied by a vacuum arc method from a nickel target with 6% phosphorus. The friction coefficient (Cfᵣ) was determined on the tribometer, the depth of wear h of...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2021 |
| Main Authors: | Lapitskaya, V.A., Kuznetsova, T.A., Trukhan, R.E., Khabarava, A.V., Chizhik, S.A., Kuprin, A.S., Komarov, A.I. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2021
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/195447 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Optimization of use conditions for cathodic arc nickel coating doped with phosphorus / V.A. Lapitskaya, T.A. Kuznetsova, R.E. Trukhan, A.V. Khabarava, S.A. Chizhik, A.S. Kuprin, A.I. Komarov, D.V. Orda, D.V. Kudin, A. Koneru // Problems of Atomic Science and Technology. — 2021. — № 5. — С. 104-110. — Бібліогр.: 14 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
by: Warcholinski, B., et al.
Published: (2022)
by: Warcholinski, B., et al.
Published: (2022)
Effect of nitrogen pressure on the structural and mechanical properties of V-Mo-N coatings deposited by cathodic arc evaporation
by: Kuprin, A.S., et al.
Published: (2022)
by: Kuprin, A.S., et al.
Published: (2022)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021)
by: Vasilenko, R.L., et al.
Published: (2021)
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
by: Kuprin, A.S., et al.
Published: (2023)
by: Kuprin, A.S., et al.
Published: (2023)
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Structure and corrosion resistance of vacuum-arc multi-period CrN/Cu, ZrN/Cu, and NbN/Cu coatings
by: Postelnyk, H.O., et al.
Published: (2020)
by: Postelnyk, H.O., et al.
Published: (2020)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
by: Sobol, O.V., et al.
Published: (2020)
by: Sobol, O.V., et al.
Published: (2020)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Structural features of chromium carbide coatings obtained by the MOCVD method from the COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020)
by: Belous, V.А., et al.
Published: (2020)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
by: Reshetnyak, E.N., et al.
Published: (2023)
by: Reshetnyak, E.N., et al.
Published: (2023)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
by: Kalinichenko, A.I., et al.
Published: (2021)
by: Kalinichenko, A.I., et al.
Published: (2021)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
by: Shirokov, B.M., et al.
Published: (2022)
by: Shirokov, B.M., et al.
Published: (2022)
Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
by: Kuprin, A.S., et al.
Published: (2019)
by: Kuprin, A.S., et al.
Published: (2019)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
by: Sukhova, O.V.
Published: (2020)
by: Sukhova, O.V.
Published: (2020)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
by: Kalinichenko, O.I., et al.
Published: (2023)
by: Kalinichenko, O.I., et al.
Published: (2023)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
by: Koshevoy, K.I., et al.
Published: (2021)
by: Koshevoy, K.I., et al.
Published: (2021)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
by: Belous, V.A., et al.
Published: (2021)
by: Belous, V.A., et al.
Published: (2021)
Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
by: Chabak, Yu.G., et al.
Published: (2019)
by: Chabak, Yu.G., et al.
Published: (2019)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
by: Hlushkova, D.B., et al.
Published: (2021)
by: Hlushkova, D.B., et al.
Published: (2021)
Creation of various structures, including nanometer scale, and investigation of mechanical and dissipative properties of VT6 titanium alloy
by: Sokolenko, V.I., et al.
Published: (2022)
by: Sokolenko, V.I., et al.
Published: (2022)
Cavitation and erosion resistance of vacuum arc Ti, Ti-Al, Ti-Zr, and Ti-Ni coatings
by: Klimenko, І.О., et al.
Published: (2022)
by: Klimenko, І.О., et al.
Published: (2022)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
by: Sobol', O.V., et al.
Published: (2019)
by: Sobol', O.V., et al.
Published: (2019)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
by: Rudenkyi, S.G., et al.
Published: (2020)
by: Rudenkyi, S.G., et al.
Published: (2020)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
by: Rudenky, S.G., et al.
Published: (2021)
by: Rudenky, S.G., et al.
Published: (2021)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
by: Gribanov, Yu.A., et al.
Published: (2020)
by: Gribanov, Yu.A., et al.
Published: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
by: Levenets, V.V., et al.
Published: (2022)
by: Levenets, V.V., et al.
Published: (2022)
Use of detonation sputtering to increase the durability of hydraulic hammer critical parts
by: Hlushkova, D.B., et al.
Published: (2021)
by: Hlushkova, D.B., et al.
Published: (2021)
Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
by: Gurin, I.V., et al.
Published: (2022)
by: Gurin, I.V., et al.
Published: (2022)
The development of the electrochemical deposition process of nickel–diamond coating with phosphorus modified DND
by: Ju. Dolmatov, et al.
Published: (2019)
by: Ju. Dolmatov, et al.
Published: (2019)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
by: Vahrusheva, V.S., et al.
Published: (2022)
by: Vahrusheva, V.S., et al.
Published: (2022)
Pure iron and nickel for new structural reactor materials
by: Pylypenko, M.M., et al.
Published: (2019)
by: Pylypenko, M.M., et al.
Published: (2019)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
by: Воеводин, В.Н., et al.
Published: (2021)
by: Воеводин, В.Н., et al.
Published: (2021)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
by: Krivchik, L., et al.
Published: (2021)
by: Krivchik, L., et al.
Published: (2021)
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
by: Efimenko, N.G., et al.
Published: (2020)
by: Efimenko, N.G., et al.
Published: (2020)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Similar Items
-
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
by: Warcholinski, B., et al.
Published: (2022) -
Effect of nitrogen pressure on the structural and mechanical properties of V-Mo-N coatings deposited by cathodic arc evaporation
by: Kuprin, A.S., et al.
Published: (2022) -
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021) -
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022) -
Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
by: Kuprin, A.S., et al.
Published: (2023)