Creation of various structures, including nanometer scale, and investigation of mechanical and dissipative properties of VT6 titanium alloy
With the use of cryogenic deformations by rolling and quasi-hydroextrusion, as well as annealing up to 723 K, various structures, including nanometer ones, were created in ultrafine-grained (UFG) titanium alloy of the VT6 grade, and mechanical and dissipative properties were studied. The deformation...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2022 |
| Hauptverfasser: | Sokolenko, V.I., Mats, A.V., Okovit, V.S., Kalinovsky, V.V., Khaimovich, P.A., Shulgin, N.A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/195656 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Creation of various structures, including nanometer scale, and investigation of mechanical and dissipative properties of VT6 titanium alloy / V.I. Sokolenko, A.V. Mats, V.S. Okovit, V.V. Kalinovsky, P.A. Khaimovich, N.A. Shulgin // Problems of Atomic Science and Technology. — 2022. — № 4. — С. 114-119. — Бібліогр.: 12 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Modification of structure and properties of nanostructured VT1-0 titanium alloy under ultrasonic influence
von: Savchuk, E.S., et al.
Veröffentlicht: (2022)
von: Savchuk, E.S., et al.
Veröffentlicht: (2022)
Study of nanomodification of nickel alloy GS3 with titanium carbide
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)
Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
von: Gurin, I.V., et al.
Veröffentlicht: (2022)
von: Gurin, I.V., et al.
Veröffentlicht: (2022)
Surface modification of the titanium alloy VT22 by high current pulsed electron beam
von: Donets, S.Ye., et al.
Veröffentlicht: (2022)
von: Donets, S.Ye., et al.
Veröffentlicht: (2022)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)
von: Sobol, O.V., et al.
Veröffentlicht: (2020)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Optimization of use conditions for cathodic arc nickel coating doped with phosphorus
von: Lapitskaya, V.A., et al.
Veröffentlicht: (2021)
von: Lapitskaya, V.A., et al.
Veröffentlicht: (2021)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
von: Belous, V.A., et al.
Veröffentlicht: (2021)
von: Belous, V.A., et al.
Veröffentlicht: (2021)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
von: Kuprin, A.S., et al.
Veröffentlicht: (2023)
von: Kuprin, A.S., et al.
Veröffentlicht: (2023)
Structure and corrosion resistance of vacuum-arc multi-period CrN/Cu, ZrN/Cu, and NbN/Cu coatings
von: Postelnyk, H.O., et al.
Veröffentlicht: (2020)
von: Postelnyk, H.O., et al.
Veröffentlicht: (2020)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
von: Belous, V.А., et al.
Veröffentlicht: (2020)
von: Belous, V.А., et al.
Veröffentlicht: (2020)
Structure and properties of powder gas-plasma coatings based on nickel
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)
Use of detonation sputtering to increase the durability of hydraulic hammer critical parts
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)
Effect of nitrogen pressure on the structural and mechanical properties of V-Mo-N coatings deposited by cathodic arc evaporation
von: Kuprin, A.S., et al.
Veröffentlicht: (2022)
von: Kuprin, A.S., et al.
Veröffentlicht: (2022)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
von: Sukhova, O.V.
Veröffentlicht: (2020)
von: Sukhova, O.V.
Veröffentlicht: (2020)
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
von: Warcholinski, B., et al.
Veröffentlicht: (2022)
von: Warcholinski, B., et al.
Veröffentlicht: (2022)
Micromechanical properties of titanium VT1-0 cryorolled to various degrees of strain
von: A. V. Rusakova, et al.
Veröffentlicht: (2015)
von: A. V. Rusakova, et al.
Veröffentlicht: (2015)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
von: Krivchik, L., et al.
Veröffentlicht: (2021)
von: Krivchik, L., et al.
Veröffentlicht: (2021)
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)
Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
von: Sereda, B., et al.
Veröffentlicht: (2023)
von: Sereda, B., et al.
Veröffentlicht: (2023)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)
Structural features of chromium carbide coatings obtained by the MOCVD method from the COL "BARKHOS"
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
von: Воеводин, В.Н., et al.
Veröffentlicht: (2021)
von: Воеводин, В.Н., et al.
Veröffentlicht: (2021)
Ähnliche Einträge
-
Modification of structure and properties of nanostructured VT1-0 titanium alloy under ultrasonic influence
von: Savchuk, E.S., et al.
Veröffentlicht: (2022) -
Study of nanomodification of nickel alloy GS3 with titanium carbide
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023) -
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021) -
Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
von: Gurin, I.V., et al.
Veröffentlicht: (2022) -
Surface modification of the titanium alloy VT22 by high current pulsed electron beam
von: Donets, S.Ye., et al.
Veröffentlicht: (2022)