Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
To increase the corrosion resistance of stainless steel from local types of corrosion, chromium oxide coatings obtained from electrolytes modified with SiO₂·nH₂O were applied to its surface. It has been established that the coatings obtained from the electrolyte with the addition of SiO₂·nH₂O are co...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2022 |
| Main Authors: | Shtefan, V.V., Balamut, N.S., Kanunnikova, N.A., Shcholokova, А.S., Zuyok, V.A., Grudnitskii, V.V., Vasilenko, R.L. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/195659 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O / V.V. Shtefan, N.S. Balamut, N.A. Kanunnikova, А.S. Shcholokova, V.A. Zuyok, V.V. Grudnitskii, R.L. Vasilenko // Problems of Atomic Science and Technology. — 2022. — № 4. — С. 131-136. — Бібліогр.: 22 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020)
by: Belous, V.А., et al.
Published: (2020)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021)
by: Vasilenko, R.L., et al.
Published: (2021)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
by: Gribanov, Yu.A., et al.
Published: (2020)
by: Gribanov, Yu.A., et al.
Published: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
by: Levenets, V.V., et al.
Published: (2022)
by: Levenets, V.V., et al.
Published: (2022)
Electrodeposition of Ni–ZrO2 nanocomposites from methylsulfonate electrolyte
by: Yu. Ye. Sknar, et al.
Published: (2015)
by: Yu. Ye. Sknar, et al.
Published: (2015)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Properties of Ni-TiO₂ composites electrodeposited from methanesulfonate electrolyte
by: Sknar, Yu.E., et al.
Published: (2017)
by: Sknar, Yu.E., et al.
Published: (2017)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
by: Sobol, O.V., et al.
Published: (2020)
by: Sobol, O.V., et al.
Published: (2020)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
by: Rudenkyi, S.G., et al.
Published: (2020)
by: Rudenkyi, S.G., et al.
Published: (2020)
Radiothermoluminescence of the γ-irradiated compositions of the ultra-high-molecular-weight polyethylene with nano-α-SiO₂
by: Maharramov, A.M., et al.
Published: (2020)
by: Maharramov, A.M., et al.
Published: (2020)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
by: Vahrusheva, V.S., et al.
Published: (2022)
by: Vahrusheva, V.S., et al.
Published: (2022)
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
by: Sukhova, O.V.
Published: (2020)
by: Sukhova, O.V.
Published: (2020)
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
by: Krivchik, L., et al.
Published: (2021)
by: Krivchik, L., et al.
Published: (2021)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
by: Rudenky, S.G., et al.
Published: (2021)
by: Rudenky, S.G., et al.
Published: (2021)
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
by: Ryabtsev, S.I., et al.
Published: (2020)
by: Ryabtsev, S.I., et al.
Published: (2020)
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
by: Efimenko, N.G., et al.
Published: (2020)
by: Efimenko, N.G., et al.
Published: (2020)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
by: Andrieieva, O.L., et al.
Published: (2023)
by: Andrieieva, O.L., et al.
Published: (2023)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
by: Kalinichenko, O.I., et al.
Published: (2023)
by: Kalinichenko, O.I., et al.
Published: (2023)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
by: Hlushkova, D.B., et al.
Published: (2021)
by: Hlushkova, D.B., et al.
Published: (2021)
Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
by: Sereda, B., et al.
Published: (2023)
by: Sereda, B., et al.
Published: (2023)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
by: Belous, V.A., et al.
Published: (2021)
by: Belous, V.A., et al.
Published: (2021)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
by: Kalinichenko, A.I., et al.
Published: (2021)
by: Kalinichenko, A.I., et al.
Published: (2021)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
by: Reshetnyak, E.N., et al.
Published: (2023)
by: Reshetnyak, E.N., et al.
Published: (2023)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
by: Koshevoy, K.I., et al.
Published: (2021)
by: Koshevoy, K.I., et al.
Published: (2021)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
by: Воеводин, В.Н., et al.
Published: (2021)
by: Воеводин, В.Н., et al.
Published: (2021)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
by: Warcholinski, B., et al.
Published: (2022)
by: Warcholinski, B., et al.
Published: (2022)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
by: Shirokov, B.M., et al.
Published: (2022)
by: Shirokov, B.M., et al.
Published: (2022)
Electrodeposition of Ni—W alloys from citratepyrophosphate electrolyte
by: S. V. Byk, et al.
Published: (2013)
by: S. V. Byk, et al.
Published: (2013)
TiO₂-2 radiating damages as a result of the irradiation helium ions with energies of 0.12 and 4 MeV on the linear accelerator
by: Butenko, V.I., et al.
Published: (2023)
by: Butenko, V.I., et al.
Published: (2023)
Properties of SiO₂-GaAs and Au-Ti-SiO₂-GaAs structures used in production of transmission lines
by: Boltovets, N.S., et al.
Published: (2002)
by: Boltovets, N.S., et al.
Published: (2002)
IR spectra of ɣ-irradiated nanocomposites ultra-high molecular weight polyethylene / α-SiO₂
by: Ismayilova, R.S., et al.
Published: (2021)
by: Ismayilova, R.S., et al.
Published: (2021)
Luminescence of SiO₂ and GeO₂ crystals with rutile structure. Comparison with α-quartz crystals and relevant glasses (Review Article)
by: Trukhin, A.N.
Published: (2016)
by: Trukhin, A.N.
Published: (2016)
Spatial separation of ions of a given mass range in the demo-imitation separator at the first turn of ionic trajectory
by: Katrechko, V.V., et al.
Published: (2021)
by: Katrechko, V.V., et al.
Published: (2021)
Роль поверхности в формировании свойств пирогенных нанокомпозитов SiO₂-Al₂O₃, SiO₂-ТіO₂ и Al₂O₃-SiO₂-ТіO₂
by: Горбик, П.П., et al.
Published: (2006)
by: Горбик, П.П., et al.
Published: (2006)
On the possibility of obtaining a beam of heavy ions in the form of an “open umbrella” with subsequent deposition in the separator manifold
by: Yuferov, V.B., et al.
Published: (2023)
by: Yuferov, V.B., et al.
Published: (2023)
Similar Items
-
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022) -
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020) -
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021) -
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
by: Gribanov, Yu.A., et al.
Published: (2020) -
CT study of products from non-metallic composites reinforced by carbon fibers
by: Levenets, V.V., et al.
Published: (2022)