Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
The AlCrN coatings were formed using cathodic arc evaporation at constant nitrogen pressure and arc current ranged from 50 to 120 A. Scanning electron microscopy, energy dispersive analysis, X-ray diffractometry, nanoindentation, adhesion tests and friction tests were used to investigate the effect...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2022 |
| Main Authors: | Warcholinski, B., Gilewicz, A., Kuprin, A.S. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/195662 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation / B. Warcholinski, A. Gilewicz, A.S. Kuprin // Problems of Atomic Science and Technology. — 2022. — № 4. — С. 141-146. — Бібліогр.: 22 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021)
by: Vasilenko, R.L., et al.
Published: (2021)
Effect of nitrogen pressure on the structural and mechanical properties of V-Mo-N coatings deposited by cathodic arc evaporation
by: Kuprin, A.S., et al.
Published: (2022)
by: Kuprin, A.S., et al.
Published: (2022)
Optimization of use conditions for cathodic arc nickel coating doped with phosphorus
by: Lapitskaya, V.A., et al.
Published: (2021)
by: Lapitskaya, V.A., et al.
Published: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020)
by: Belous, V.А., et al.
Published: (2020)
Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
by: Kuprin, A.S., et al.
Published: (2023)
by: Kuprin, A.S., et al.
Published: (2023)
Structure and corrosion resistance of vacuum-arc multi-period CrN/Cu, ZrN/Cu, and NbN/Cu coatings
by: Postelnyk, H.O., et al.
Published: (2020)
by: Postelnyk, H.O., et al.
Published: (2020)
Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
by: Kuprin, A.S., et al.
Published: (2019)
by: Kuprin, A.S., et al.
Published: (2019)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
by: Sobol, O.V., et al.
Published: (2020)
by: Sobol, O.V., et al.
Published: (2020)
Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
by: Chabak, Yu.G., et al.
Published: (2019)
by: Chabak, Yu.G., et al.
Published: (2019)
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
by: Ryabtsev, S.I., et al.
Published: (2020)
by: Ryabtsev, S.I., et al.
Published: (2020)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
by: Sukhova, O.V.
Published: (2020)
by: Sukhova, O.V.
Published: (2020)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
by: Kalinichenko, O.I., et al.
Published: (2023)
by: Kalinichenko, O.I., et al.
Published: (2023)
Effect of carbon on the properties of CrN coatings formed by cathodic arc evaporation in stationary system
by: Kuprin, A.S., et al.
Published: (2016)
by: Kuprin, A.S., et al.
Published: (2016)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
by: Koshevoy, K.I., et al.
Published: (2021)
by: Koshevoy, K.I., et al.
Published: (2021)
Structure and properties of powder gas-plasma coatings based on nickel
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
by: Reshetnyak, E.N., et al.
Published: (2023)
by: Reshetnyak, E.N., et al.
Published: (2023)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
by: Shirokov, B.M., et al.
Published: (2022)
by: Shirokov, B.M., et al.
Published: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
by: Shtefan, V.V., et al.
Published: (2022)
by: Shtefan, V.V., et al.
Published: (2022)
Structural features of chromium carbide coatings obtained by the MOCVD method from the COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
by: Rudenky, S.G., et al.
Published: (2021)
by: Rudenky, S.G., et al.
Published: (2021)
The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
by: Sobol', O.V., et al.
Published: (2019)
by: Sobol', O.V., et al.
Published: (2019)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
by: Kalinichenko, A.I., et al.
Published: (2021)
by: Kalinichenko, A.I., et al.
Published: (2021)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
by: Belous, V.A., et al.
Published: (2021)
by: Belous, V.A., et al.
Published: (2021)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
by: Krokhmal, S.A., et al.
Published: (2021)
by: Krokhmal, S.A., et al.
Published: (2021)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
by: Novikov, V.Yu., et al.
Published: (2019)
by: Novikov, V.Yu., et al.
Published: (2019)
Evaporation of micro-droplets in cathode arc plasma coating under formed electron beam
by: Goncharov, A.A., et al.
Published: (2022)
by: Goncharov, A.A., et al.
Published: (2022)
Cavitation and erosion resistance of vacuum arc Ti, Ti-Al, Ti-Zr, and Ti-Ni coatings
by: Klimenko, І.О., et al.
Published: (2022)
by: Klimenko, І.О., et al.
Published: (2022)
Tribological properties of vacuum arc Cr-O-N coatings in macro- and microscale
by: Kuprin, A.S., et al.
Published: (2016)
by: Kuprin, A.S., et al.
Published: (2016)
Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
by: Kovalenko, V.I., et al.
Published: (2019)
by: Kovalenko, V.I., et al.
Published: (2019)
Investigation of the influence of Ar pressure on vacuum-arc plasma with Cr-, Cu-, and Zr-cathodes
by: Kovtun, Yu.V., et al.
Published: (2019)
by: Kovtun, Yu.V., et al.
Published: (2019)
Study of nanomodification of nickel alloy GS3 with titanium carbide
by: Hlushkova, D.B., et al.
Published: (2023)
by: Hlushkova, D.B., et al.
Published: (2023)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
by: Gribanov, Yu.A., et al.
Published: (2020)
by: Gribanov, Yu.A., et al.
Published: (2020)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
by: Hlushkova, D.B., et al.
Published: (2021)
by: Hlushkova, D.B., et al.
Published: (2021)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
by: Воеводин, В.Н., et al.
Published: (2021)
by: Воеводин, В.Н., et al.
Published: (2021)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
by: Krivchik, L., et al.
Published: (2021)
by: Krivchik, L., et al.
Published: (2021)
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
by: Efimenko, N.G., et al.
Published: (2020)
by: Efimenko, N.G., et al.
Published: (2020)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
by: Rudenkyi, S.G., et al.
Published: (2020)
by: Rudenkyi, S.G., et al.
Published: (2020)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Similar Items
-
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
by: Vasilenko, R.L., et al.
Published: (2021) -
Effect of nitrogen pressure on the structural and mechanical properties of V-Mo-N coatings deposited by cathodic arc evaporation
by: Kuprin, A.S., et al.
Published: (2022) -
Optimization of use conditions for cathodic arc nickel coating doped with phosphorus
by: Lapitskaya, V.A., et al.
Published: (2021) -
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020) -
Protective vacuum-arc coatings on zirconium alloy fuel cladding to prevent catastrophic accidents at nuclear reactors
by: Kuprin, A.S., et al.
Published: (2023)