Resistance of titanium alloys to cavitation wear
The wear rate of titanium alloys VT1-0, TC5, VT6, VT14, OT4 under the action of microshocks due to cavitation, which is created in distilled water under the surface of the ultrasonic wave emitter, were determined. It was found that the increase in hardness and improvement of cavitation wear resistan...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2022 |
| ISSN: | 1562-6016 |
| Main Authors: | Klimenko, І.О., Marinin, V.G., Ovcharenko, V.D., Kovalenko, V.I., Kuprin, A.S., Reshetnyak, O.M., Belous, V.A., Rostova, H.Yu. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/195915 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Resistance of titanium alloys to cavitation wear / І.О. Klimenko, V.G. Marinin, V.D. Ovcharenko, V.I. Kovalenko, A.S. Kuprin, O.M. Reshetnyak, V.A. Belous, H.Yu. Rostova // Problems of Atomic Science and Technology. — 2022. — № 1. — С. 130-135. — Бібліогр.: 25 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Cavitation and erosion resistance of vacuum arc Ti, Ti-Al, Ti-Zr, and Ti-Ni coatings
by: Klimenko, І.О., et al.
Published: (2022)
by: Klimenko, І.О., et al.
Published: (2022)
Effect of ausforming on mechanical properties of 12%Cr ferritic/martensitic steel
by: Kislyak, I.F., et al.
Published: (2022)
by: Kislyak, I.F., et al.
Published: (2022)
Increasing the corrosion resistance of welded joints of heat-resistant nickel alloy with steel
by: Bolshakov, V.I., et al.
Published: (2022)
by: Bolshakov, V.I., et al.
Published: (2022)
Influence of iron additives on the corrosion resistance of the Zr-1%Nb alloy under operating conditions of a nuclear reactor
by: Pylypenko, M.M., et al.
Published: (2022)
by: Pylypenko, M.M., et al.
Published: (2022)
Radiation hardness of polysiloxane-based scintillators
by: Zhmurin, P.М., et al.
Published: (2022)
by: Zhmurin, P.М., et al.
Published: (2022)
Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
by: Kovalenko, V.I., et al.
Published: (2019)
by: Kovalenko, V.I., et al.
Published: (2019)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Actinides filtering out in the demo-imitation separator with a magnetic field of a given configuration
by: Yuferov, V.B., et al.
Published: (2022)
by: Yuferov, V.B., et al.
Published: (2022)
Creep of VT1-0 alloy in different structural states
by: Savchuk, E.S., et al.
Published: (2022)
by: Savchuk, E.S., et al.
Published: (2022)
Comparison of corrosion of aluminum-based alloys forming decagonal quasicrystals in NaCl solution
by: Polonskyy, V.A., et al.
Published: (2022)
by: Polonskyy, V.A., et al.
Published: (2022)
Determination of the dependence of the NPP unit power on the steam temperature at the outlet of the superheater separator first stage with an uncertainty of information
by: Yefimov, O.V., et al.
Published: (2022)
by: Yefimov, O.V., et al.
Published: (2022)
SIMS study of the TiFe alloy interaction with oxygen
by: Litvinov, V.A., et al.
Published: (2022)
by: Litvinov, V.A., et al.
Published: (2022)
Modification of the structurally the phase state of aluminum alloy as a result of radiation thermal treatment
by: Prokhorenko, E.M., et al.
Published: (2022)
by: Prokhorenko, E.M., et al.
Published: (2022)
The express registration of thermal conductivity anomalies of solids
by: Sokolenko, V.I., et al.
Published: (2022)
by: Sokolenko, V.I., et al.
Published: (2022)
The model of description of extraction of uranium-235 and uranium-238 isotopes complexes in a supercritical carbon dioxide layer heated from below
by: Borts, B.V., et al.
Published: (2022)
by: Borts, B.V., et al.
Published: (2022)
Interval models of temperature characteristics of superheater separators in nuclear power plant units with the capacity of 1000 MW
by: Yefimov, O.V., et al.
Published: (2022)
by: Yefimov, O.V., et al.
Published: (2022)
Formation of step density shock waves on vicinal NaCl(100) growth surfaces
by: Kulyk, O.P., et al.
Published: (2022)
by: Kulyk, O.P., et al.
Published: (2022)
Computer simulation of thermal and hydraulic processes in NPP steam generator channels on the basis of interval-iterative method
by: Yefimov, O.V., et al.
Published: (2022)
by: Yefimov, O.V., et al.
Published: (2022)
Computational dosimetry and post-irradiation studies of the electron beam irradiation-assisted corrosion and stress corrosion cracking of statically strained steel samples in a supercritical water coolant
by: Bakai, O.S., et al.
Published: (2022)
by: Bakai, O.S., et al.
Published: (2022)
Mathematical relations of models of single-phase flows in the channels of reactors and steam generators of NPP's for calculation of heat transfer processes and hydrodynamic characteristics
by: Yefimov, O.V., et al.
Published: (2022)
by: Yefimov, O.V., et al.
Published: (2022)
Peculiarities of the formation of a hardened layer during laser borinizing of piston rings
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Mathematical relationships of models of two-phase flows in channels of reactors and steam generators of NPP's for the calculation of their hydrodynamic characteristics
by: Yefimov, О.V., et al.
Published: (2022)
by: Yefimov, О.V., et al.
Published: (2022)
Microplasticity of 15Kh2NMFA vessel steel in a stress-strain state during magnetic treatment
by: Chernyak, N.A., et al.
Published: (2022)
by: Chernyak, N.A., et al.
Published: (2022)
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method
by: Dmytrenko, O.E., et al.
Published: (2022)
by: Dmytrenko, O.E., et al.
Published: (2022)
The Lifshitz-Rosenzweig method in calculations of the bias of basic dislocation loops in zirconium
by: Trotsenko, O.G., et al.
Published: (2022)
by: Trotsenko, O.G., et al.
Published: (2022)
High-field forming of tungsten surface by evaporation in liquid nitrogen
by: Sadanov, E.V., et al.
Published: (2022)
by: Sadanov, E.V., et al.
Published: (2022)
The microplasma aluminum and titanium oxidation in condensed environments
by: Vinnikov, D.V., et al.
Published: (2020)
by: Vinnikov, D.V., et al.
Published: (2020)
ᵃʳᶜʰPbWO₄ with improved optical parameters from archaeological lead
by: Yakubovskaya, A.G., et al.
Published: (2022)
by: Yakubovskaya, A.G., et al.
Published: (2022)
About experimental discovery of type II superconductivity
by: Shepelev, A.
Published: (2022)
by: Shepelev, A.
Published: (2022)
Relative length as a classification parameter of the crystallization mode of amorphous films
by: Bagmut, A.G.
Published: (2022)
by: Bagmut, A.G.
Published: (2022)
Physical and chemical foundations of the extraction refining of natural uranium
by: Mukhachev, A.P., et al.
Published: (2022)
by: Mukhachev, A.P., et al.
Published: (2022)
Concomitant extraction process of niobium at the titanium tetrachloride production
by: Sarsembekov, Т.К., et al.
Published: (2020)
by: Sarsembekov, Т.К., et al.
Published: (2020)
A review: ferritic-martensitic steels – treatment, structure and mechanical properties
by: Rostova, H.Yu., et al.
Published: (2022)
by: Rostova, H.Yu., et al.
Published: (2022)
Multi-group modeling of protection against neutron and gamma radiation by materials based on titanium hydride
by: Yastrebinsky, R.N., et al.
Published: (2020)
by: Yastrebinsky, R.N., et al.
Published: (2020)
The wear resistance of titanium alloys
by: O. M. Solovar, et al.
Published: (2016)
by: O. M. Solovar, et al.
Published: (2016)
Research of the thermal desorption processes in oxide mixtures at laser effect
by: Katrechko, V.V., et al.
Published: (2020)
by: Katrechko, V.V., et al.
Published: (2020)
Influence of Titanium on Formation of Wear-Resistant Alloy
by: A. Y. Liubych, et al.
Published: (2013)
by: A. Y. Liubych, et al.
Published: (2013)
Thermophysical properties of fuel clading with various vacuum-arc coatings
by: Belous, V.A., et al.
Published: (2019)
by: Belous, V.A., et al.
Published: (2019)
Cavitation erosion of Ti-6Al-4V alloy with vacuum-arc TiN and CrN coatings
by: Kuprin, А.S., et al.
Published: (2018)
by: Kuprin, А.S., et al.
Published: (2018)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
by: Belous, V.А., et al.
Published: (2020)
by: Belous, V.А., et al.
Published: (2020)
Similar Items
-
Cavitation and erosion resistance of vacuum arc Ti, Ti-Al, Ti-Zr, and Ti-Ni coatings
by: Klimenko, І.О., et al.
Published: (2022) -
Effect of ausforming on mechanical properties of 12%Cr ferritic/martensitic steel
by: Kislyak, I.F., et al.
Published: (2022) -
Increasing the corrosion resistance of welded joints of heat-resistant nickel alloy with steel
by: Bolshakov, V.I., et al.
Published: (2022) -
Influence of iron additives on the corrosion resistance of the Zr-1%Nb alloy under operating conditions of a nuclear reactor
by: Pylypenko, M.M., et al.
Published: (2022) -
Radiation hardness of polysiloxane-based scintillators
by: Zhmurin, P.М., et al.
Published: (2022)