Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method
A comprehensive study of the technical parameters and conditions for the synthesis of ternary alloys in the Ti-Zr-Ni system by the “hydride cycle” method was carried out. The influence on the synthesis process of such parameters as: temperature and annealing time, heating rate, cooling conditions, m...
Збережено в:
| Опубліковано в: : | Вопросы атомной науки и техники |
|---|---|
| Дата: | 2022 |
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/195920 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method / O.E. Dmytrenko, I.V. Kolodiy, T.B. Yanko, V.M. Borysenko, K. Irwin, R.L. Vasilenko // Problems of Atomic Science and Technology. — 2022. — № 1. — С. 111-121. — Бібліогр.: 20 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
nasplib_isofts_kiev_ua-123456789-195920 |
|---|---|
| record_format |
dspace |
| spelling |
Dmytrenko, O.E. Kolodiy, I.V. Yanko, T.B. Borysenko, V.M. Irwin, K. Vasilenko, R.L. 2023-12-08T11:14:36Z 2023-12-08T11:14:36Z 2022 Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method / O.E. Dmytrenko, I.V. Kolodiy, T.B. Yanko, V.M. Borysenko, K. Irwin, R.L. Vasilenko // Problems of Atomic Science and Technology. — 2022. — № 1. — С. 111-121. — Бібліогр.: 20 назв. — англ. 1562-6016 PACS: 81.20.-n, 81.40.-z, 71.20.Lp DOI: https://doi.org/10.46813/2022-137-111 https://nasplib.isofts.kiev.ua/handle/123456789/195920 A comprehensive study of the technical parameters and conditions for the synthesis of ternary alloys in the Ti-Zr-Ni system by the “hydride cycle” method was carried out. The influence on the synthesis process of such parameters as: temperature and annealing time, heating rate, cooling conditions, material composition, dispersion, hydrogen content in the hydrides used, the presence of impurities, mixing and pressing methods, and the degree of pressing of the starting components was determined. The alloys of the following compositions were synthesized and investigated: Ti₄₀.₅Zr₃₁.₉Ni₂₇.₆, Ti₄₁.₅Zr₄₁.₅Ni₁₇, Ti₄₀Zr₄₀Ni₂₀, Ti₄₄Zr₄₀Ni₁₆. The optimal technological parameters and conditions for the synthesis of ternary alloys are determined. It has been established that the key factors in the process of compound formation during hydride dissociation are the dispersion and homogeneity of the initial compacted components. It was found that the synthesis of ternary alloys in the Ti-Zr-Ni system occurs during a short-term exothermic reaction in the “thermal explosion” mode, which begins in the temperature region corresponding to the α↔β polymorphic transformation of zirconium and titanium. Проведено комплексне дослідження технічних параметрів та умов синтезу потрійних сплавів у системі Ti-Zr-Ni методом «гідридного циклу». Було визначено вплив на процес синтезу таких параметрів, як: температура і час відпалу; швидкість нагрівання; умови охолодження; склад матеріалу; дисперсність; вміст водню в гідридах, що використовуються; наявність домішок; способи змішування і пресування, а також ступінь пресування вихідних компонентів. Синтезовано та досліджено сплави наступних складів: Ti₄₀.₅Zr₃₁.₉Ni₂₇.₆, Ti₄₁.₅Zr₄₁.₅Ni₁₇, Ti₄₀Zr₄₀Ni₂₀, Ti₄₄Zr₄₀Ni₁₆. Визначено оптимальні технологічні параметри та умови синтезу потрійних сплавів. Встановлено, що ключовими факторами в процесі утворення сполук при дисоціації гідридів є дисперсність та однорідність вихідних спресованих компонентів. Встановлено, що синтез потрійних сплавів у системі Ti-Zr-Ni відбувається в ході короткочасної екзотермічної реакції в режимі «теплового вибуху», яка починається в області температур, що відповідає поліморфному перетворенню α↔β цирконію та титану. Проведены комплексные исследования технических параметров и условий синтеза тройных сплавов в системе Ti-Zr-Ni методом «гидридного цикла». Определено влияние на процесс синтеза таких параметров, как: температура и время отжига, скорость нагрева, условия охлаждения, состав материала, дисперсность, содержание водорода в используемых гидридах, наличие примесей, способы смешивания и прессования, а также степень прессования исходных компонентов. Синтезированы и исследованы сплавы следующих составов: Ti₄₀.₅Zr₃₁.₉Ni₂₇.₆, Ti₄₁.₅Zr₄₁.₅Ni₁₇, Ti₄₀Zr₄₀Ni₂₀, Ti₄₄Zr₄₀Ni₁₆. Определены оптимальные технологические параметры и условия синтеза тройных сплавов. Установлено, что ключевыми факторами в процессе образования соединений при диссоциации гидридов являются дисперсность и однородность исходных спрессованных компонентов. Установлено, что синтез тройных сплавов в системе Ti-Zr-Ni происходит в ходе кратковременной экзотермической реакции в режиме «теплового взрыва», которая начинается в области температур, соответствующей полиморфному превращению α↔β циркония и титана. This work was supported by non-profit corporation Quantum Gravity Research, CA, USA. en Національний науковий центр «Харківський фізико-технічний інститут» НАН України Вопросы атомной науки и техники Physics and technology of structural materials Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method Синтез сплавів Ti-Zr-Ni методом «гідридного циклу» Синтез сплавов Ti-Zr-Ni методом "гидридного цикла" Article published earlier |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| title |
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method |
| spellingShingle |
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method Dmytrenko, O.E. Kolodiy, I.V. Yanko, T.B. Borysenko, V.M. Irwin, K. Vasilenko, R.L. Physics and technology of structural materials |
| title_short |
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method |
| title_full |
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method |
| title_fullStr |
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method |
| title_full_unstemmed |
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method |
| title_sort |
synthesis of the ti-zr-ni alloys by the "hydride cycle" method |
| author |
Dmytrenko, O.E. Kolodiy, I.V. Yanko, T.B. Borysenko, V.M. Irwin, K. Vasilenko, R.L. |
| author_facet |
Dmytrenko, O.E. Kolodiy, I.V. Yanko, T.B. Borysenko, V.M. Irwin, K. Vasilenko, R.L. |
| topic |
Physics and technology of structural materials |
| topic_facet |
Physics and technology of structural materials |
| publishDate |
2022 |
| language |
English |
| container_title |
Вопросы атомной науки и техники |
| publisher |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України |
| format |
Article |
| title_alt |
Синтез сплавів Ti-Zr-Ni методом «гідридного циклу» Синтез сплавов Ti-Zr-Ni методом "гидридного цикла" |
| description |
A comprehensive study of the technical parameters and conditions for the synthesis of ternary alloys in the Ti-Zr-Ni system by the “hydride cycle” method was carried out. The influence on the synthesis process of such parameters as: temperature and annealing time, heating rate, cooling conditions, material composition, dispersion, hydrogen content in the hydrides used, the presence of impurities, mixing and pressing methods, and the degree of pressing of the starting components was determined. The alloys of the following compositions were synthesized and investigated: Ti₄₀.₅Zr₃₁.₉Ni₂₇.₆, Ti₄₁.₅Zr₄₁.₅Ni₁₇, Ti₄₀Zr₄₀Ni₂₀, Ti₄₄Zr₄₀Ni₁₆. The optimal technological parameters and conditions for the synthesis of ternary alloys are determined. It has been established that the key factors in the process of compound formation during hydride dissociation are the dispersion and homogeneity of the initial compacted components. It was found that the synthesis of ternary alloys in the Ti-Zr-Ni system occurs during a short-term exothermic reaction in the “thermal explosion” mode, which begins in the temperature region corresponding to the α↔β polymorphic transformation of zirconium and titanium.
Проведено комплексне дослідження технічних параметрів та умов синтезу потрійних сплавів у системі Ti-Zr-Ni методом «гідридного циклу». Було визначено вплив на процес синтезу таких параметрів, як: температура і час відпалу; швидкість нагрівання; умови охолодження; склад матеріалу; дисперсність; вміст водню в гідридах, що використовуються; наявність домішок; способи змішування і пресування, а також ступінь пресування вихідних компонентів. Синтезовано та досліджено сплави наступних складів: Ti₄₀.₅Zr₃₁.₉Ni₂₇.₆, Ti₄₁.₅Zr₄₁.₅Ni₁₇, Ti₄₀Zr₄₀Ni₂₀, Ti₄₄Zr₄₀Ni₁₆. Визначено оптимальні технологічні параметри та умови синтезу потрійних сплавів. Встановлено, що ключовими факторами в процесі утворення сполук при дисоціації гідридів є дисперсність та однорідність вихідних спресованих компонентів. Встановлено, що синтез потрійних сплавів у системі Ti-Zr-Ni відбувається в ході короткочасної екзотермічної реакції в режимі «теплового вибуху», яка починається в області температур, що відповідає поліморфному перетворенню α↔β цирконію та титану.
Проведены комплексные исследования технических параметров и условий синтеза тройных сплавов в системе Ti-Zr-Ni методом «гидридного цикла». Определено влияние на процесс синтеза таких параметров, как: температура и время отжига, скорость нагрева, условия охлаждения, состав материала, дисперсность, содержание водорода в используемых гидридах, наличие примесей, способы смешивания и прессования, а также степень прессования исходных компонентов. Синтезированы и исследованы сплавы следующих составов: Ti₄₀.₅Zr₃₁.₉Ni₂₇.₆, Ti₄₁.₅Zr₄₁.₅Ni₁₇, Ti₄₀Zr₄₀Ni₂₀, Ti₄₄Zr₄₀Ni₁₆. Определены оптимальные технологические параметры и условия синтеза тройных сплавов. Установлено, что ключевыми факторами в процессе образования соединений при диссоциации гидридов являются дисперсность и однородность исходных спрессованных компонентов. Установлено, что синтез тройных сплавов в системе Ti-Zr-Ni происходит в ходе кратковременной экзотермической реакции в режиме «теплового взрыва», которая начинается в области температур, соответствующей полиморфному превращению α↔β циркония и титана.
|
| issn |
1562-6016 |
| url |
https://nasplib.isofts.kiev.ua/handle/123456789/195920 |
| citation_txt |
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method / O.E. Dmytrenko, I.V. Kolodiy, T.B. Yanko, V.M. Borysenko, K. Irwin, R.L. Vasilenko // Problems of Atomic Science and Technology. — 2022. — № 1. — С. 111-121. — Бібліогр.: 20 назв. — англ. |
| work_keys_str_mv |
AT dmytrenkooe synthesisofthetizrnialloysbythehydridecyclemethod AT kolodiyiv synthesisofthetizrnialloysbythehydridecyclemethod AT yankotb synthesisofthetizrnialloysbythehydridecyclemethod AT borysenkovm synthesisofthetizrnialloysbythehydridecyclemethod AT irwink synthesisofthetizrnialloysbythehydridecyclemethod AT vasilenkorl synthesisofthetizrnialloysbythehydridecyclemethod AT dmytrenkooe sintezsplavívtizrnimetodomgídridnogociklu AT kolodiyiv sintezsplavívtizrnimetodomgídridnogociklu AT yankotb sintezsplavívtizrnimetodomgídridnogociklu AT borysenkovm sintezsplavívtizrnimetodomgídridnogociklu AT irwink sintezsplavívtizrnimetodomgídridnogociklu AT vasilenkorl sintezsplavívtizrnimetodomgídridnogociklu AT dmytrenkooe sintezsplavovtizrnimetodomgidridnogocikla AT kolodiyiv sintezsplavovtizrnimetodomgidridnogocikla AT yankotb sintezsplavovtizrnimetodomgidridnogocikla AT borysenkovm sintezsplavovtizrnimetodomgidridnogocikla AT irwink sintezsplavovtizrnimetodomgidridnogocikla AT vasilenkorl sintezsplavovtizrnimetodomgidridnogocikla |
| first_indexed |
2025-12-07T19:09:35Z |
| last_indexed |
2025-12-07T19:09:35Z |
| _version_ |
1850877752359518208 |