Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method
A comprehensive study of the technical parameters and conditions for the synthesis of ternary alloys in the Ti-Zr-Ni system by the “hydride cycle” method was carried out. The influence on the synthesis process of such parameters as: temperature and annealing time, heating rate, cooling conditions, m...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2022 |
| ISSN: | 1562-6016 |
| Main Authors: | Dmytrenko, O.E., Kolodiy, I.V., Yanko, T.B., Borysenko, V.M., Irwin, K., Vasilenko, R.L. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/195920 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method / O.E. Dmytrenko, I.V. Kolodiy, T.B. Yanko, V.M. Borysenko, K. Irwin, R.L. Vasilenko // Problems of Atomic Science and Technology. — 2022. — № 1. — С. 111-121. — Бібліогр.: 20 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Synthesis of hydrogen storage materials in a Ti-Zr-Ni system using the hydride cycle technology during dehydrogenation by an electron beam in a vacuum
by: Dmytrenko, O.E., et al.
Published: (2020)
by: Dmytrenko, O.E., et al.
Published: (2020)
Investigation into hydride reorientation in dummy fuel rod cladding (Zr-1%Nb) under internal pressure during testing simulating SNF handling and accidents with limiting cladding heating up to 410 °С
by: Riedkina, G.P., et al.
Published: (2020)
by: Riedkina, G.P., et al.
Published: (2020)
Electron irradiation, temperature, and stress effect on corrosion of Zr-, Ni-Cr-, and Fe-Cr-based alloys in the vicinity of the water coolant supercritical transition
by: Bakai, O.S., et al.
Published: (2020)
by: Bakai, O.S., et al.
Published: (2020)
Multi-group modeling of protection against neutron and gamma radiation by materials based on titanium hydride
by: Yastrebinsky, R.N., et al.
Published: (2020)
by: Yastrebinsky, R.N., et al.
Published: (2020)
Current state of methods for low–dense constructional composite materials producing (overview)
by: Shcherbakova, E.P., et al.
Published: (2020)
by: Shcherbakova, E.P., et al.
Published: (2020)
Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy
by: Dmytrenko, O.Ye., et al.
Published: (2018)
by: Dmytrenko, O.Ye., et al.
Published: (2018)
Effect of electronic radiation on the evolution of nanostructure and creep of Zr at the temperature of 670 K
by: Karaseva, E.V., et al.
Published: (2020)
by: Karaseva, E.V., et al.
Published: (2020)
Structural-phase transformations in magnetron deposited films of Ti-Zr-Ni systems during annealing in vacuum
by: Malykhin, S.V., et al.
Published: (2022)
by: Malykhin, S.V., et al.
Published: (2022)
SIMS study of the TiFe alloy interaction with oxygen
by: Litvinov, V.A., et al.
Published: (2022)
by: Litvinov, V.A., et al.
Published: (2022)
Cavitation and erosion resistance of vacuum arc Ti, Ti-Al, Ti-Zr, and Ti-Ni coatings
by: Klimenko, І.О., et al.
Published: (2022)
by: Klimenko, І.О., et al.
Published: (2022)
Influence of iron additives on the corrosion resistance of the Zr-1%Nb alloy under operating conditions of a nuclear reactor
by: Pylypenko, M.M., et al.
Published: (2022)
by: Pylypenko, M.M., et al.
Published: (2022)
Intense plastic deformation of high-purity cast beryllium
by: Vasilev, A.A., et al.
Published: (2020)
by: Vasilev, A.A., et al.
Published: (2020)
Influence of mechanical-thermal treatment on the microstructure and current-carrying capacity of Nb-Ti-superconductor
by: Storozhilov, G.E., et al.
Published: (2020)
by: Storozhilov, G.E., et al.
Published: (2020)
Effect of ausforming on mechanical properties of 12%Cr ferritic/martensitic steel
by: Kislyak, I.F., et al.
Published: (2022)
by: Kislyak, I.F., et al.
Published: (2022)
Modification of the structurally the phase state of aluminum alloy as a result of radiation thermal treatment
by: Prokhorenko, E.M., et al.
Published: (2022)
by: Prokhorenko, E.M., et al.
Published: (2022)
Microstructure and mechanical properties of oxide dispersion strengthened high-entropy alloys CoCrFeMnNi and CrFe₂MnNi
by: Kolodiy, I.V., et al.
Published: (2021)
by: Kolodiy, I.V., et al.
Published: (2021)
Concomitant extraction process of niobium at the titanium tetrachloride production
by: Sarsembekov, Т.К., et al.
Published: (2020)
by: Sarsembekov, Т.К., et al.
Published: (2020)
Peculiarities of kinetic and mechanical properties of high-entropy alloy Аl₀.₅CoCuCrNiFe in range ~ 300…77 К
by: Voyevodin, V.N., et al.
Published: (2020)
by: Voyevodin, V.N., et al.
Published: (2020)
Synthesis of Alloys Based on Binary Zr—Ti System Using Zirconium Hydride Powder
by: D. G. Savvakin, et al.
Published: (2013)
by: D. G. Savvakin, et al.
Published: (2013)
The influence of 18Cr10NiTi and ODS 18Cr10NiTi austenitic stainless steels microstructure on the deuterium desorption
by: Kalchenko, A.S., et al.
Published: (2020)
by: Kalchenko, A.S., et al.
Published: (2020)
Computational dosimetry and post-irradiation studies of the electron beam irradiation-assisted corrosion and stress corrosion cracking of statically strained steel samples in a supercritical water coolant
by: Bakai, O.S., et al.
Published: (2022)
by: Bakai, O.S., et al.
Published: (2022)
Effect of iron on evolution of the structure of alloy Zr-1%Nb under ion irradiation
by: Pylypenko, M.M., et al.
Published: (2022)
by: Pylypenko, M.M., et al.
Published: (2022)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Investigation on corrosion properties of carbon-carbon composites
by: Gribanov, Yu.A., et al.
Published: (2020)
by: Gribanov, Yu.A., et al.
Published: (2020)
Facility for hydrogenation and thermal testing of internally pressurized dummy fuel rods
by: Dolgiy, V.A., et al.
Published: (2020)
by: Dolgiy, V.A., et al.
Published: (2020)
Research of the thermal desorption processes in oxide mixtures at laser effect
by: Katrechko, V.V., et al.
Published: (2020)
by: Katrechko, V.V., et al.
Published: (2020)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
by: Novikov, V.Yu., et al.
Published: (2019)
by: Novikov, V.Yu., et al.
Published: (2019)
Behavior of the Ti-Zr-Ni thin film containing quasicrystalline and approximant phases under radiative-thermal action in transition modes
by: Malykhin, S.V., et al.
Published: (2020)
by: Malykhin, S.V., et al.
Published: (2020)
Formation of plastic properties of 12Cr18Ni10Ti steel highly irradiated by neutrons
by: Maksimkin, О.P., et al.
Published: (2021)
by: Maksimkin, О.P., et al.
Published: (2021)
Creep of VT1-0 alloy in different structural states
by: Savchuk, E.S., et al.
Published: (2022)
by: Savchuk, E.S., et al.
Published: (2022)
ᵃʳᶜʰPbWO₄ with improved optical parameters from archaeological lead
by: Yakubovskaya, A.G., et al.
Published: (2022)
by: Yakubovskaya, A.G., et al.
Published: (2022)
Mineral insulators for kompton detectors of neutrons with a metal hafnium emitter
by: Bohdan, E.A., et al.
Published: (2020)
by: Bohdan, E.A., et al.
Published: (2020)
Analyses of structure phase stability of U-Mo target of the neutron source
by: Borts, B.V., et al.
Published: (2020)
by: Borts, B.V., et al.
Published: (2020)
Application of interval analysis for improving reliability of estimation of hardness value spread for nuclear structural materials
by: Yefimov, A.V., et al.
Published: (2020)
by: Yefimov, A.V., et al.
Published: (2020)
Nuclear zirconium – the basis of alloys with improved neutron-physical, radiation, and corrosion properties
by: Mukhachev, A.P., et al.
Published: (2020)
by: Mukhachev, A.P., et al.
Published: (2020)
The microplasma aluminum and titanium oxidation in condensed environments
by: Vinnikov, D.V., et al.
Published: (2020)
by: Vinnikov, D.V., et al.
Published: (2020)
Zone for collecting the ions of a given mass range in the plasma filter of masses
by: Katrechko, V.V., et al.
Published: (2020)
by: Katrechko, V.V., et al.
Published: (2020)
High-field forming of tungsten surface by evaporation in liquid nitrogen
by: Sadanov, E.V., et al.
Published: (2022)
by: Sadanov, E.V., et al.
Published: (2022)
The model of description of extraction of uranium-235 and uranium-238 isotopes complexes in a supercritical carbon dioxide layer heated from below
by: Borts, B.V., et al.
Published: (2022)
by: Borts, B.V., et al.
Published: (2022)
Comparison of corrosion of aluminum-based alloys forming decagonal quasicrystals in NaCl solution
by: Polonskyy, V.A., et al.
Published: (2022)
by: Polonskyy, V.A., et al.
Published: (2022)
Similar Items
-
Synthesis of hydrogen storage materials in a Ti-Zr-Ni system using the hydride cycle technology during dehydrogenation by an electron beam in a vacuum
by: Dmytrenko, O.E., et al.
Published: (2020) -
Investigation into hydride reorientation in dummy fuel rod cladding (Zr-1%Nb) under internal pressure during testing simulating SNF handling and accidents with limiting cladding heating up to 410 °С
by: Riedkina, G.P., et al.
Published: (2020) -
Electron irradiation, temperature, and stress effect on corrosion of Zr-, Ni-Cr-, and Fe-Cr-based alloys in the vicinity of the water coolant supercritical transition
by: Bakai, O.S., et al.
Published: (2020) -
Multi-group modeling of protection against neutron and gamma radiation by materials based on titanium hydride
by: Yastrebinsky, R.N., et al.
Published: (2020) -
Current state of methods for low–dense constructional composite materials producing (overview)
by: Shcherbakova, E.P., et al.
Published: (2020)