Determination of the dependence of the NPP unit power on the steam temperature at the outlet of the superheater separator first stage with an uncertainty of information
The article discusses the application of the standard statistical approach and interval analysis procedures to the estimation of the parameters of the dependence of the power of an NPP power unit on the steam temperature at the outlet of the first stage of the superheater separator under conditions...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2022 |
| Main Authors: | Yefimov, O.V., Potanina, Т.V. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/195923 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Determination of the dependence of the NPP unit power on the steam temperature at the outlet of the superheater separator first stage with an uncertainty of information / O.V. Yefimov, Т.V. Potanina // Problems of Atomic Science and Technology. — 2022. — № 1. — С. 169-172. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Interval models of temperature characteristics of superheater separators in nuclear power plant units with the capacity of 1000 MW
by: Yefimov, O.V., et al.
Published: (2022)
by: Yefimov, O.V., et al.
Published: (2022)
Computer simulation of thermal and hydraulic processes in NPP steam generator channels on the basis of interval-iterative method
by: Yefimov, O.V., et al.
Published: (2022)
by: Yefimov, O.V., et al.
Published: (2022)
Mathematical relationships of models of two-phase flows in channels of reactors and steam generators of NPP's for the calculation of their hydrodynamic characteristics
by: Yefimov, О.V., et al.
Published: (2022)
by: Yefimov, О.V., et al.
Published: (2022)
Mathematical relations of models of single-phase flows in the channels of reactors and steam generators of NPP's for calculation of heat transfer processes and hydrodynamic characteristics
by: Yefimov, O.V., et al.
Published: (2022)
by: Yefimov, O.V., et al.
Published: (2022)
Components of automated intellectual systems supporting decisions at the stage of operation and equipment diagnostics of nuclear power units
by: Yefimov, О.V., et al.
Published: (2020)
by: Yefimov, О.V., et al.
Published: (2020)
Actinides filtering out in the demo-imitation separator with a magnetic field of a given configuration
by: Yuferov, V.B., et al.
Published: (2022)
by: Yuferov, V.B., et al.
Published: (2022)
Improving the efficiency of the unit of the Zaporizhzhia NPP with a WWER–1000 reactor
by: Cheilytko, A.A., et al.
Published: (2020)
by: Cheilytko, A.A., et al.
Published: (2020)
Application of interval analysis for improving reliability of estimation of hardness value spread for nuclear structural materials
by: Yefimov, A.V., et al.
Published: (2020)
by: Yefimov, A.V., et al.
Published: (2020)
Basic approaches to the choice of material for working blades of the last stages of the LPC of powerful steam turbines
by: Slaston, L.O., et al.
Published: (2020)
by: Slaston, L.O., et al.
Published: (2020)
Comparison of corrosion of aluminum-based alloys forming decagonal quasicrystals in NaCl solution
by: Polonskyy, V.A., et al.
Published: (2022)
by: Polonskyy, V.A., et al.
Published: (2022)
Improving the quality condition of the structure of welded joints made of rotor steel
by: Dmytryk, V.V., et al.
Published: (2022)
by: Dmytryk, V.V., et al.
Published: (2022)
Formation of step density shock waves on vicinal NaCl(100) growth surfaces
by: Kulyk, O.P., et al.
Published: (2022)
by: Kulyk, O.P., et al.
Published: (2022)
Radiation hardness of polysiloxane-based scintillators
by: Zhmurin, P.М., et al.
Published: (2022)
by: Zhmurin, P.М., et al.
Published: (2022)
Increasing the corrosion resistance of welded joints of heat-resistant nickel alloy with steel
by: Bolshakov, V.I., et al.
Published: (2022)
by: Bolshakov, V.I., et al.
Published: (2022)
Creep of VT1-0 alloy in different structural states
by: Savchuk, E.S., et al.
Published: (2022)
by: Savchuk, E.S., et al.
Published: (2022)
ᵃʳᶜʰPbWO₄ with improved optical parameters from archaeological lead
by: Yakubovskaya, A.G., et al.
Published: (2022)
by: Yakubovskaya, A.G., et al.
Published: (2022)
Influence of iron additives on the corrosion resistance of the Zr-1%Nb alloy under operating conditions of a nuclear reactor
by: Pylypenko, M.M., et al.
Published: (2022)
by: Pylypenko, M.M., et al.
Published: (2022)
High-field forming of tungsten surface by evaporation in liquid nitrogen
by: Sadanov, E.V., et al.
Published: (2022)
by: Sadanov, E.V., et al.
Published: (2022)
The model of description of extraction of uranium-235 and uranium-238 isotopes complexes in a supercritical carbon dioxide layer heated from below
by: Borts, B.V., et al.
Published: (2022)
by: Borts, B.V., et al.
Published: (2022)
The Lifshitz-Rosenzweig method in calculations of the bias of basic dislocation loops in zirconium
by: Trotsenko, O.G., et al.
Published: (2022)
by: Trotsenko, O.G., et al.
Published: (2022)
Computational dosimetry and post-irradiation studies of the electron beam irradiation-assisted corrosion and stress corrosion cracking of statically strained steel samples in a supercritical water coolant
by: Bakai, O.S., et al.
Published: (2022)
by: Bakai, O.S., et al.
Published: (2022)
Modification of the structurally the phase state of aluminum alloy as a result of radiation thermal treatment
by: Prokhorenko, E.M., et al.
Published: (2022)
by: Prokhorenko, E.M., et al.
Published: (2022)
Microplasticity of 15Kh2NMFA vessel steel in a stress-strain state during magnetic treatment
by: Chernyak, N.A., et al.
Published: (2022)
by: Chernyak, N.A., et al.
Published: (2022)
About experimental discovery of type II superconductivity
by: Shepelev, A.
Published: (2022)
by: Shepelev, A.
Published: (2022)
Effect of ausforming on mechanical properties of 12%Cr ferritic/martensitic steel
by: Kislyak, I.F., et al.
Published: (2022)
by: Kislyak, I.F., et al.
Published: (2022)
Peculiarities of the formation of a hardened layer during laser borinizing of piston rings
by: Hlushkova, D.B., et al.
Published: (2022)
by: Hlushkova, D.B., et al.
Published: (2022)
Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method
by: Dmytrenko, O.E., et al.
Published: (2022)
by: Dmytrenko, O.E., et al.
Published: (2022)
Resistance of titanium alloys to cavitation wear
by: Klimenko, І.О., et al.
Published: (2022)
by: Klimenko, І.О., et al.
Published: (2022)
Physical and chemical foundations of the extraction refining of natural uranium
by: Mukhachev, A.P., et al.
Published: (2022)
by: Mukhachev, A.P., et al.
Published: (2022)
Relative length as a classification parameter of the crystallization mode of amorphous films
by: Bagmut, A.G.
Published: (2022)
by: Bagmut, A.G.
Published: (2022)
SIMS study of the TiFe alloy interaction with oxygen
by: Litvinov, V.A., et al.
Published: (2022)
by: Litvinov, V.A., et al.
Published: (2022)
The express registration of thermal conductivity anomalies of solids
by: Sokolenko, V.I., et al.
Published: (2022)
by: Sokolenko, V.I., et al.
Published: (2022)
Estimation of the dependence parameters of nuclear structural materials hardness on the content of gas impurities: an interval approach
by: Potanina, Т.V., et al.
Published: (2021)
by: Potanina, Т.V., et al.
Published: (2021)
The method for optimizing the iron content in the structural material Zr1%Nb for fuel element cladding of NPP nuclear reactors
by: Yefimov, O.V., et al.
Published: (2023)
by: Yefimov, O.V., et al.
Published: (2023)
Evaluation of the possibility of further use of collectors of the primary steam superheaters with operating damages
by: V. I. Astashkin, et al.
Published: (2018)
by: V. I. Astashkin, et al.
Published: (2018)
Research by direct methods of the base metal of main circulation pipeline of the power unit 3 of the south ukraine NPP after 200 thousand hours of operation
by: Vasilenko, R.L., et al.
Published: (2022)
by: Vasilenko, R.L., et al.
Published: (2022)
Intense plastic deformation of high-purity cast beryllium
by: Vasilev, A.A., et al.
Published: (2020)
by: Vasilev, A.A., et al.
Published: (2020)
Casting MHD-Unit with Weight-metering Outlet Gutter for Aluminum Melts
by: K. S. Bogdan, et al.
Published: (2016)
by: K. S. Bogdan, et al.
Published: (2016)
CFD model as a digital twin of the radiation state of the new safe confinement of the chernobyl NPP
by: Krukovskyi, P.G., et al.
Published: (2020)
by: Krukovskyi, P.G., et al.
Published: (2020)
Mineral insulators for kompton detectors of neutrons with a metal hafnium emitter
by: Bohdan, E.A., et al.
Published: (2020)
by: Bohdan, E.A., et al.
Published: (2020)
Similar Items
-
Interval models of temperature characteristics of superheater separators in nuclear power plant units with the capacity of 1000 MW
by: Yefimov, O.V., et al.
Published: (2022) -
Computer simulation of thermal and hydraulic processes in NPP steam generator channels on the basis of interval-iterative method
by: Yefimov, O.V., et al.
Published: (2022) -
Mathematical relationships of models of two-phase flows in channels of reactors and steam generators of NPP's for the calculation of their hydrodynamic characteristics
by: Yefimov, О.V., et al.
Published: (2022) -
Mathematical relations of models of single-phase flows in the channels of reactors and steam generators of NPP's for calculation of heat transfer processes and hydrodynamic characteristics
by: Yefimov, O.V., et al.
Published: (2022) -
Components of automated intellectual systems supporting decisions at the stage of operation and equipment diagnostics of nuclear power units
by: Yefimov, О.V., et al.
Published: (2020)