Buchumschlag

Improving the quality condition of the structure of welded joints made of rotor steel

The solution to the problem of increasing the reliability and service life of the welded joint of the rotor involved obtaining its original structure with improved quality characteristics. Obtaining was achieved by improving the technology of automatic welding. This improvement was based on the perf...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Вопросы атомной науки и техники
Datum:	2022
Hauptverfasser:	Dmytryk, V.V., Skulsky, V.Yu., Kasyanenko, I.V., Vavilov, O.V., Kantor, O.G.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2022
Schlagworte:	Physics and technology of structural materials
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/195931
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Improving the quality condition of the structure of welded joints made of rotor steel / V.V. Dmytryk, V.Yu. Skulsky, I.V. Kasyanenko, O.V. Vavilov, O.G. Kantor // Problems of Atomic Science and Technology. — 2022. — № 1. — С. 212-216. — Бібліогр.: 8 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)

Increasing the corrosion resistance of welded joints of heat-resistant nickel alloy with steel
von: Bolshakov, V.I., et al.
Veröffentlicht: (2022)

Effect of ausforming on mechanical properties of 12%Cr ferritic/martensitic steel
von: Kislyak, I.F., et al.
Veröffentlicht: (2022)

Microplasticity of 15Kh2NMFA vessel steel in a stress-strain state during magnetic treatment
von: Chernyak, N.A., et al.
Veröffentlicht: (2022)

Computational dosimetry and post-irradiation studies of the electron beam irradiation-assisted corrosion and stress corrosion cracking of statically strained steel samples in a supercritical water coolant
von: Bakai, O.S., et al.
Veröffentlicht: (2022)

The Lifshitz-Rosenzweig method in calculations of the bias of basic dislocation loops in zirconium
von: Trotsenko, O.G., et al.
Veröffentlicht: (2022)

Comparison of corrosion of aluminum-based alloys forming decagonal quasicrystals in NaCl solution
von: Polonskyy, V.A., et al.
Veröffentlicht: (2022)

Determination of the dependence of the NPP unit power on the steam temperature at the outlet of the superheater separator first stage with an uncertainty of information
von: Yefimov, O.V., et al.
Veröffentlicht: (2022)

Interval models of temperature characteristics of superheater separators in nuclear power plant units with the capacity of 1000 MW
von: Yefimov, O.V., et al.
Veröffentlicht: (2022)

Modification of the structurally the phase state of aluminum alloy as a result of radiation thermal treatment
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2022)

Formation of step density shock waves on vicinal NaCl(100) growth surfaces
von: Kulyk, O.P., et al.
Veröffentlicht: (2022)

Computer simulation of thermal and hydraulic processes in NPP steam generator channels on the basis of interval-iterative method
von: Yefimov, O.V., et al.
Veröffentlicht: (2022)

Mathematical relations of models of single-phase flows in the channels of reactors and steam generators of NPP's for calculation of heat transfer processes and hydrodynamic characteristics
von: Yefimov, O.V., et al.
Veröffentlicht: (2022)

Synthesis of the Ti-Zr-Ni alloys by the "hydride cycle" method
von: Dmytrenko, O.E., et al.
Veröffentlicht: (2022)

Radiation hardness of polysiloxane-based scintillators
von: Zhmurin, P.М., et al.
Veröffentlicht: (2022)

Actinides filtering out in the demo-imitation separator with a magnetic field of a given configuration
von: Yuferov, V.B., et al.
Veröffentlicht: (2022)

Creep of VT1-0 alloy in different structural states
von: Savchuk, E.S., et al.
Veröffentlicht: (2022)

SIMS study of the TiFe alloy interaction with oxygen
von: Litvinov, V.A., et al.
Veröffentlicht: (2022)

The express registration of thermal conductivity anomalies of solids
von: Sokolenko, V.I., et al.
Veröffentlicht: (2022)

The model of description of extraction of uranium-235 and uranium-238 isotopes complexes in a supercritical carbon dioxide layer heated from below
von: Borts, B.V., et al.
Veröffentlicht: (2022)

Resistance of titanium alloys to cavitation wear
von: Klimenko, І.О., et al.
Veröffentlicht: (2022)

Peculiarities of the formation of a hardened layer during laser borinizing of piston rings
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)

Mathematical relationships of models of two-phase flows in channels of reactors and steam generators of NPP's for the calculation of their hydrodynamic characteristics
von: Yefimov, О.V., et al.
Veröffentlicht: (2022)

Influence of iron additives on the corrosion resistance of the Zr-1%Nb alloy under operating conditions of a nuclear reactor
von: Pylypenko, M.M., et al.
Veröffentlicht: (2022)

High-field forming of tungsten surface by evaporation in liquid nitrogen
von: Sadanov, E.V., et al.
Veröffentlicht: (2022)

ᵃʳᶜʰPbWO₄ with improved optical parameters from archaeological lead
von: Yakubovskaya, A.G., et al.
Veröffentlicht: (2022)

About experimental discovery of type II superconductivity
von: Shepelev, A.
Veröffentlicht: (2022)

Relative length as a classification parameter of the crystallization mode of amorphous films
von: Bagmut, A.G.
Veröffentlicht: (2022)

Physical and chemical foundations of the extraction refining of natural uranium
von: Mukhachev, A.P., et al.
Veröffentlicht: (2022)

Recrystallization in the metal of welding joints of steam trucks
von: Dmytryk, V.V., et al.
Veröffentlicht: (2019)

Delayer fracture resistance of welded joints of rotor steel 25Kh2NMFA after welding reheating
von: Ju. Skulskij, et al.
Veröffentlicht: (2019)

Improvement of impact toughness of metal of combined welded joints of alloyed bainite steels
von: S. I. Moravetskij, et al.
Veröffentlicht: (2017)

Strengthening of the surface of steel (9XФМ) exposed to a high-current electron beam
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2020)

Elastic interaction energy of point defects with a basal dislocation loop in zirconium
von: Trotsenko, O.G., et al.
Veröffentlicht: (2020)

Research of the thermal desorption processes in oxide mixtures at laser effect
von: Katrechko, V.V., et al.
Veröffentlicht: (2020)

Structure and properties of steel 10G2FB welded joints made by arc welding
von: S. L. Zhdanov, et al.
Veröffentlicht: (2010)

Evaluation of deformability of pipe steel joints made by automatic continuous flash-butt welding
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2011)

Structure and properties of 35L type steel welded joints made by multilayer electroslag welding
von: S. M. Kozulin, et al.
Veröffentlicht: (2013)

Investigation on corrosion properties of carbon-carbon composites
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)

Prospects of application of tubes made of duplex steels of a new generation in the heat exchanging equipment of nuclear power plants
von: Dergach, T.A., et al.
Veröffentlicht: (2019)