Improving the quality condition of the structure of welded joints made of rotor steel
The solution to the problem of increasing the reliability and service life of the welded joint of the rotor involved obtaining its original structure with improved quality characteristics. Obtaining was achieved by improving the technology of automatic welding. This improvement was based on the perf...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2022 |
| Hauptverfasser: | Dmytryk, V.V., Skulsky, V.Yu., Kasyanenko, I.V., Vavilov, O.V., Kantor, O.G. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/195937 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Improving the quality condition of the structure of welded joints made of rotor steel / V.V. Dmytryk, V.Yu. Skulsky, I.V. Kasyanenko, O.V. Vavilov, O.G. Kantor // Problems of Atomic Science and Technology. — 2022. — № 2. — С. 87-91. — Бібліогр.: 8 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
Recrystallization in the metal of welding joints of steam trucks
von: Dmytryk, V.V., et al.
Veröffentlicht: (2019)
von: Dmytryk, V.V., et al.
Veröffentlicht: (2019)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
von: Belous, V.A., et al.
Veröffentlicht: (2021)
von: Belous, V.A., et al.
Veröffentlicht: (2021)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
von: Sukhova, O.V.
Veröffentlicht: (2020)
von: Sukhova, O.V.
Veröffentlicht: (2020)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)
Structure and properties of powder gas-plasma coatings based on nickel
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)
von: Sobol, O.V., et al.
Veröffentlicht: (2020)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
von: Belous, V.А., et al.
Veröffentlicht: (2020)
von: Belous, V.А., et al.
Veröffentlicht: (2020)
Study of nanomodification of nickel alloy GS3 with titanium carbide
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
von: Krivchik, L., et al.
Veröffentlicht: (2021)
von: Krivchik, L., et al.
Veröffentlicht: (2021)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)
Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
von: Sereda, B., et al.
Veröffentlicht: (2023)
von: Sereda, B., et al.
Veröffentlicht: (2023)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
von: Воеводин, В.Н., et al.
Veröffentlicht: (2021)
von: Воеводин, В.Н., et al.
Veröffentlicht: (2021)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
von: Warcholinski, B., et al.
Veröffentlicht: (2022)
von: Warcholinski, B., et al.
Veröffentlicht: (2022)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)
Delayer fracture resistance of welded joints of rotor steel 25Kh2NMFA after welding reheating
von: Ju. Skulskij, et al.
Veröffentlicht: (2019)
von: Ju. Skulskij, et al.
Veröffentlicht: (2019)
Improvement of impact toughness of metal of combined welded joints of alloyed bainite steels
von: S. I. Moravetskij, et al.
Veröffentlicht: (2017)
von: S. I. Moravetskij, et al.
Veröffentlicht: (2017)
The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
von: Sobol', O.V., et al.
Veröffentlicht: (2019)
von: Sobol', O.V., et al.
Veröffentlicht: (2019)
Direct martensitic transformations of low-carbon steels
von: Belykh, D.G., et al.
Veröffentlicht: (2023)
von: Belykh, D.G., et al.
Veröffentlicht: (2023)
Tribological characteristics of 'steel-ceramics-irradiated-by-helium-ions' pair
von: Butenko, V.I., et al.
Veröffentlicht: (2021)
von: Butenko, V.I., et al.
Veröffentlicht: (2021)
Effect of argon-ion irradiation on cavity formation in 18Cr10NiTi austenitic steel and its strengthened version
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)
Structure and properties of steel 10G2FB welded joints made by arc welding
von: S. L. Zhdanov, et al.
Veröffentlicht: (2010)
von: S. L. Zhdanov, et al.
Veröffentlicht: (2010)
Plasma coating formation by the deposition of cathode material eroded through high-current pulsed discharge
von: Chabak, Yu.G., et al.
Veröffentlicht: (2019)
von: Chabak, Yu.G., et al.
Veröffentlicht: (2019)
Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
von: Belous, V.А., et al.
Veröffentlicht: (2019)
von: Belous, V.А., et al.
Veröffentlicht: (2019)
Ähnliche Einträge
-
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
von: Efimenko, N.G., et al.
Veröffentlicht: (2020) -
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020) -
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023) -
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021) -
Recrystallization in the metal of welding joints of steam trucks
von: Dmytryk, V.V., et al.
Veröffentlicht: (2019)