Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
The sorption capacity for iodine vapors of samples of carbon fiber cloth materials 31-3, 31-6, 35-1, 35-2, and KIPT 16-00 obtained at NSC KIPT, carbon fiber cloth materials of the Saut and Busofit brands and active granular carbons ISQ-3, SKT-3, and DGF-2 has been studied. The sorption capacity of c...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2022 |
| Hauptverfasser: | Gurin, I.V., Sokolenko, V.I., Vinokurov, E.I., Sibileva, R.M., Grigorova, T.G., Grigorenko, M.A., Kravtsov, Ya.V., Kudin, D.V. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2022
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/195955 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons / I.V. Gurin, V.I. Sokolenko, E.I. Vinokurov, R.M. Sibileva, T.G. Grigorova, M.A. Grigorenko, Ya.V. Kravtsov, D.V. Kudin // Problems of Atomic Science and Technology. — 2022. — № 2. — С. 77-81. — Бібліогр.: 4 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Study of iodine adsorption in the dynamic mode for several carbon adsorbents
von: Sokolenko, V.I., et al.
Veröffentlicht: (2015)
von: Sokolenko, V.I., et al.
Veröffentlicht: (2015)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)
On the electromagnetic shielding properties of carbon fiber materials
von: Rosu, G., et al.
Veröffentlicht: (2022)
von: Rosu, G., et al.
Veröffentlicht: (2022)
Measurement of the efficiency of iodine and iodine methyl vapors absorption from the ventilated airflow
von: Kolobrodov, V.G., et al.
Veröffentlicht: (2009)
von: Kolobrodov, V.G., et al.
Veröffentlicht: (2009)
Comparative characteristics of mechanical and adsorption properties of activated charcoals applied for adsorbers of NPP air discharge systems
von: Lepin, I.V., et al.
Veröffentlicht: (2020)
von: Lepin, I.V., et al.
Veröffentlicht: (2020)
Polypropylene fibers filled with carbon nanotubes: mechanical properties and biocompatibility
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2013)
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2013)
Stages of destruction and elastic compression of granular nanoporous carbon medium at high pressures
von: Neklyudov, I.M., et al.
Veröffentlicht: (2015)
von: Neklyudov, I.M., et al.
Veröffentlicht: (2015)
Structural carbon-carbon materials for accelerator-driven systems
von: Gurin, V.A., et al.
Veröffentlicht: (2005)
von: Gurin, V.A., et al.
Veröffentlicht: (2005)
Synthesis, thermodesorption and catalytic properties of sulfur-containing carbon fiber
von: L. M. Hrishchenko, et al.
Veröffentlicht: (2018)
von: L. M. Hrishchenko, et al.
Veröffentlicht: (2018)
Bromination and functionalization of the carbon fibers surface with sulfur containing groups
von: L. M. Hrishchenko, et al.
Veröffentlicht: (2013)
von: L. M. Hrishchenko, et al.
Veröffentlicht: (2013)
Investigation on corrosion properties of carbon-carbon composites
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026)
von: Imran, Muhammad
Veröffentlicht: (2026)
Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026)
von: Imran, Muhammad
Veröffentlicht: (2026)
Bromination of carbon fibers as a route to formation of active functional surface
von: L. M. Grishchenko, et al.
Veröffentlicht: (2014)
von: L. M. Grishchenko, et al.
Veröffentlicht: (2014)
Vacuum high-temperature refining of carbon materials using NaCl vapors as a transport and reaction medium
von: Kravtsov, Ya.V., et al.
Veröffentlicht: (2020)
von: Kravtsov, Ya.V., et al.
Veröffentlicht: (2020)
Plasma bromination as pre-treatment of carbon fiber for acid-base catalyst preparation
von: L. M. Grishchenko, et al.
Veröffentlicht: (2015)
von: L. M. Grishchenko, et al.
Veröffentlicht: (2015)
System of ultrasonic non-destructive testing of carbon fiber composite defects
von: Xuerui Wang, et al.
Veröffentlicht: (2018)
von: Xuerui Wang, et al.
Veröffentlicht: (2018)
Carbon-carbon windows, intended for extraction of electron-and proton beams from accelerators into atmosphere
von: Kovpik, O.F., et al.
Veröffentlicht: (2004)
von: Kovpik, O.F., et al.
Veröffentlicht: (2004)
TiO₂-2 radiating damages as a result of the irradiation helium ions with energies of 0.12 and 4 MeV on the linear accelerator
von: Butenko, V.I., et al.
Veröffentlicht: (2023)
von: Butenko, V.I., et al.
Veröffentlicht: (2023)
Activity of carbon-fiber-supported Fe–Co catalysts in the CO2 methanation reaction
von: S. V. Haidai, et al.
Veröffentlicht: (2017)
von: S. V. Haidai, et al.
Veröffentlicht: (2017)
Simulation of the compensation of a high-current ion beam by an electron beam in a cusp magnetic system
von: Onishchenko, I.N., et al.
Veröffentlicht: (2021)
von: Onishchenko, I.N., et al.
Veröffentlicht: (2021)
Modernization of the helium ion accelerator microwave power supply system
von: Gaponenko, N.I., et al.
Veröffentlicht: (2023)
von: Gaponenko, N.I., et al.
Veröffentlicht: (2023)
On the possibility of obtaining a beam of heavy ions in the form of an “open umbrella” with subsequent deposition in the separator manifold
von: Yuferov, V.B., et al.
Veröffentlicht: (2023)
von: Yuferov, V.B., et al.
Veröffentlicht: (2023)
Study of the impregnation kinetics of basalt, carbon, oxide fibers with aluminum melts and its alloys
von: V. P. Krasovskyi, et al.
Veröffentlicht: (2021)
von: V. P. Krasovskyi, et al.
Veröffentlicht: (2021)
Creation of various structures, including nanometer scale, and investigation of mechanical and dissipative properties of VT6 titanium alloy
von: Sokolenko, V.I., et al.
Veröffentlicht: (2022)
von: Sokolenko, V.I., et al.
Veröffentlicht: (2022)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)
von: Putic, S., et al.
Veröffentlicht: (2003)
Features of the immobilization of nanosilver on an activated carbon fiber nanostructural matrix for the development of antibacterial materials for medical use
von: I. V. Kononko, et al.
Veröffentlicht: (2019)
von: I. V. Kononko, et al.
Veröffentlicht: (2019)
Spatial separation of ions of a given mass range in the demo-imitation separator at the first turn of ionic trajectory
von: Katrechko, V.V., et al.
Veröffentlicht: (2021)
von: Katrechko, V.V., et al.
Veröffentlicht: (2021)
The termal deformation of isotropic beam elements of technological equipment in the manufacturing of carbon-carbon composite materials in furnaces of direct heating
von: Meltyukhov, M.V., et al.
Veröffentlicht: (2023)
von: Meltyukhov, M.V., et al.
Veröffentlicht: (2023)
Surface modification of basalt fibers, oxide and carbon materials for improvement their wetting with low-melting melts
von: V. P. Krasovskyi, et al.
Veröffentlicht: (2022)
von: V. P. Krasovskyi, et al.
Veröffentlicht: (2022)
Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2019)
von: Prokhorenko, E.M., et al.
Veröffentlicht: (2019)
Movement of charged particles in magnetic and nonuniform stochastic electric fields
von: Azarenkov, N.A., et al.
Veröffentlicht: (2021)
von: Azarenkov, N.A., et al.
Veröffentlicht: (2021)
Interaction of stromal cells with carbon composite materials under culture conditions
von: Ju. A. Petrenko, et al.
Veröffentlicht: (2007)
von: Ju. A. Petrenko, et al.
Veröffentlicht: (2007)
Culturing of cryopreserved stromal cells on carbon microfibers
von: Ju. A. Petrenko, et al.
Veröffentlicht: (2008)
von: Ju. A. Petrenko, et al.
Veröffentlicht: (2008)
Influence of carbonization conditions on porous structure of carbon materials
von: V. M. Vashchynskyi, et al.
Veröffentlicht: (2022)
von: V. M. Vashchynskyi, et al.
Veröffentlicht: (2022)
Carbon and carbon clusters in metal–boron–carbon ceramics fabricated by solid-phase synthesis
von: I. F. Kazo, et al.
Veröffentlicht: (2011)
von: I. F. Kazo, et al.
Veröffentlicht: (2011)
Study of DNA interaction with carbon nanotubes
von: Dovbeshko, G.I., et al.
Veröffentlicht: (2003)
von: Dovbeshko, G.I., et al.
Veröffentlicht: (2003)
New concept of the main part of multicharged ions linear accelerator on the combined RF focusing basis
von: Tishkin, S.S., et al.
Veröffentlicht: (2023)
von: Tishkin, S.S., et al.
Veröffentlicht: (2023)
Ähnliche Einträge
-
Study of iodine adsorption in the dynamic mode for several carbon adsorbents
von: Sokolenko, V.I., et al.
Veröffentlicht: (2015) -
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022) -
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020) -
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023) -
On the electromagnetic shielding properties of carbon fiber materials
von: Rosu, G., et al.
Veröffentlicht: (2022)