Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
The work deals with wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system (partially alloyed with Mo, B, and V). Additional alloying of the studied steels with titanium in the amount of 2…5% supported avoiding cleavages along the building-up zone...
Gespeichert in:
| Veröffentlicht in: | Problems of Atomic Science and Technology |
|---|---|
| Datum: | 2023 |
| Hauptverfasser: | Hlushkova, D.B., Bagrov, V.A., Saenko, V.A., Volchuk, V.M., Kalinin, A.V., Kalinina, N.E. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2023
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/196088 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system / D.B. Hlushkova, V.A. Bagrov, V.A. Saenko, V.M. Volchuk, A.V. Kalinin, N.E. Kalinina // Problems of Atomic Science and Technology. — 2023. — № 2. — С. 105-109. — Бібліогр.: 14 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Structure and properties of powder gas-plasma coatings based on nickel
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)
Study of nanomodification of nickel alloy GS3 with titanium carbide
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022)
Hardening of leading edges of turbine blades by electrospark alloying
von: Kalinina, N.E., et al.
Veröffentlicht: (2019)
von: Kalinina, N.E., et al.
Veröffentlicht: (2019)
Effect of severe plastic deformation on radiation hardening of T91 ferritic-martensitic steel
von: Voyevodin, V.N., et al.
Veröffentlicht: (2021)
von: Voyevodin, V.N., et al.
Veröffentlicht: (2021)
Effect of argon ion irradiation on hardening and microstructure of ferritic-martensitic steel T91
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
von: Belous, V.A., et al.
Veröffentlicht: (2021)
von: Belous, V.A., et al.
Veröffentlicht: (2021)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
von: Shtefan, V.V., et al.
Veröffentlicht: (2022)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
von: Sobol, O.V., et al.
Veröffentlicht: (2020)
von: Sobol, O.V., et al.
Veröffentlicht: (2020)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)
von: Rudenkyi, S.G., et al.
Veröffentlicht: (2020)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
von: Gribanov, Yu.A., et al.
Veröffentlicht: (2020)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)
von: Vasilenko, R.L., et al.
Veröffentlicht: (2021)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2021)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)
von: Reshetnyak, E.N., et al.
Veröffentlicht: (2023)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)
von: Rudenky, S.G., et al.
Veröffentlicht: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
von: Belous, V.А., et al.
Veröffentlicht: (2020)
von: Belous, V.А., et al.
Veröffentlicht: (2020)
Improving the quality condition of the structure of welded joints made of rotor steel
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)
von: Dmytryk, V.V., et al.
Veröffentlicht: (2022)
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
von: Warcholinski, B., et al.
Veröffentlicht: (2022)
von: Warcholinski, B., et al.
Veröffentlicht: (2022)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
von: Sukhova, O.V.
Veröffentlicht: (2020)
von: Sukhova, O.V.
Veröffentlicht: (2020)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
von: Krivchik, L., et al.
Veröffentlicht: (2021)
von: Krivchik, L., et al.
Veröffentlicht: (2021)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
von: Krokhmal, S.A., et al.
Veröffentlicht: (2021)
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)
von: Ryabtsev, S.I., et al.
Veröffentlicht: (2020)
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)
von: Efimenko, N.G., et al.
Veröffentlicht: (2020)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)
von: Kalinichenko, O.I., et al.
Veröffentlicht: (2023)
Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
von: Sereda, B., et al.
Veröffentlicht: (2023)
von: Sereda, B., et al.
Veröffentlicht: (2023)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)
von: Shirokov, B.M., et al.
Veröffentlicht: (2022)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
von: Воеводин, В.Н., et al.
Veröffentlicht: (2021)
von: Воеводин, В.Н., et al.
Veröffentlicht: (2021)
Peculiarities of the formation of a hardened layer during laser borinizing of piston rings
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022)
Formation of deformation martensite in the chromium-nickel austenitic steels
von: H. V. Snizhnoi
Veröffentlicht: (2011)
von: H. V. Snizhnoi
Veröffentlicht: (2011)
Direct martensitic transformations of low-carbon steels
von: Belykh, D.G., et al.
Veröffentlicht: (2023)
von: Belykh, D.G., et al.
Veröffentlicht: (2023)
Modernization of the helium ion accelerator microwave power supply system
von: Gaponenko, N.I., et al.
Veröffentlicht: (2023)
von: Gaponenko, N.I., et al.
Veröffentlicht: (2023)
Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
The influence of the melts of lead and eutectics lead-bithmus on fatigue life of martensitic and austenitic steels
von: O. I. Yaskiv, et al.
Veröffentlicht: (2014)
von: O. I. Yaskiv, et al.
Veröffentlicht: (2014)
Effect of argon-ion irradiation on cavity formation in 18Cr10NiTi austenitic steel and its strengthened version
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)
Swelling prediction of AISI 304 and 18Cr10NiTi austenitic stainless steels using various empirical functions
von: Kalchenko, A.S., et al.
Veröffentlicht: (2022)
von: Kalchenko, A.S., et al.
Veröffentlicht: (2022)
Ähnliche Einträge
-
Structure and properties of powder gas-plasma coatings based on nickel
von: Hlushkova, D.B., et al.
Veröffentlicht: (2022) -
Study of nanomodification of nickel alloy GS3 with titanium carbide
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023) -
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
von: Hlushkova, D.B., et al.
Veröffentlicht: (2021) -
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
von: Vahrusheva, V.S., et al.
Veröffentlicht: (2022) -
Hardening of leading edges of turbine blades by electrospark alloying
von: Kalinina, N.E., et al.
Veröffentlicht: (2019)