Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence
The results of the research on establishing the dependence of the coercive force (Нs) on special boundaries in a low-carbon alloy are given. Annealing at a temperature of 900 °С with a holding time of 1 to 3 h leads to an increase in the number of special boundaries from 22.7 to 37.17% and to an inc...
Збережено в:
| Опубліковано в: : | Problems of Atomic Science and Technology |
|---|---|
| Дата: | 2023 |
| Автори: | Sereda, B., Kryhliyak, I., Sereda, D., Voloh, V. |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2023
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/196104 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Research of special limits during heat treatment of materials in the two-phase region under supercritical temperature influence / B. Sereda, I. Kryhliyak, D. Sereda, V. Voloh // Problems of Atomic Science and Technology. — 2023. — № 2. — С. 122-125. — Бібліогр.: 11 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineСхожі ресурси
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
за авторством: Belous, V.A., та інші
Опубліковано: (2021)
за авторством: Belous, V.A., та інші
Опубліковано: (2021)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
за авторством: Andrieieva, O.L., та інші
Опубліковано: (2023)
за авторством: Andrieieva, O.L., та інші
Опубліковано: (2023)
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
за авторством: Gribanov, Yu.A., та інші
Опубліковано: (2020)
за авторством: Gribanov, Yu.A., та інші
Опубліковано: (2020)
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
за авторством: Vahrusheva, V.S., та інші
Опубліковано: (2022)
за авторством: Vahrusheva, V.S., та інші
Опубліковано: (2022)
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
за авторством: Efimenko, N.G., та інші
Опубліковано: (2020)
за авторством: Efimenko, N.G., та інші
Опубліковано: (2020)
Influence of the magnitude of the bias potential and thickness of the layers on the structure, substructure, stress-deformed state and mechanical characteristics of vacuum-arc multi-layered (TiMo)N/(TiSi)N coatings
за авторством: Sobol, O.V., та інші
Опубліковано: (2020)
за авторством: Sobol, O.V., та інші
Опубліковано: (2020)
Growth rate of diamond-like coatings synthesized in RF discharge at various ratios of the concentrations of Ar and C₆H₆
за авторством: Kalinichenko, A.I., та інші
Опубліковано: (2021)
за авторством: Kalinichenko, A.I., та інші
Опубліковано: (2021)
Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films
за авторством: Ryabtsev, S.I., та інші
Опубліковано: (2020)
за авторством: Ryabtsev, S.I., та інші
Опубліковано: (2020)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
за авторством: Shtefan, V.V., та інші
Опубліковано: (2022)
за авторством: Shtefan, V.V., та інші
Опубліковано: (2022)
Structure and properties of powder gas-plasma coatings based on nickel
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2022)
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2022)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
за авторством: Rudenky, S.G., та інші
Опубліковано: (2021)
за авторством: Rudenky, S.G., та інші
Опубліковано: (2021)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
за авторством: Sukhova, O.V.
Опубліковано: (2020)
за авторством: Sukhova, O.V.
Опубліковано: (2020)
Влияние различных режимов термообработки на ударную вязкость металлического слоистого композита (МСК) на основе стали 3 и меди М1
за авторством: Воеводин, В.Н., та інші
Опубліковано: (2021)
за авторством: Воеводин, В.Н., та інші
Опубліковано: (2021)
CT study of products from non-metallic composites reinforced by carbon fibers
за авторством: Levenets, V.V., та інші
Опубліковано: (2022)
за авторством: Levenets, V.V., та інші
Опубліковано: (2022)
Strengthening of pipe tools for cold roller rolling of corrosion-resistant pipes by application of amorphous alloys
за авторством: Krivchik, L., та інші
Опубліковано: (2021)
за авторством: Krivchik, L., та інші
Опубліковано: (2021)
Radiation-acoustic effects at diamond-like coating deposition from the flow of hydrocarbon ions and their influence on kinetic processes
за авторством: Kalinichenko, O.I., та інші
Опубліковано: (2023)
за авторством: Kalinichenko, O.I., та інші
Опубліковано: (2023)
Optimization of diamond-like carbon coatings for mechanical and tribological applications. Review
за авторством: Reshetnyak, E.N., та інші
Опубліковано: (2023)
за авторством: Reshetnyak, E.N., та інші
Опубліковано: (2023)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
за авторством: Koshevoy, K.I., та інші
Опубліковано: (2021)
за авторством: Koshevoy, K.I., та інші
Опубліковано: (2021)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2023)
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2023)
Corrosion resistance of reinforced layers of 15Х11MF steel steam turbine blades
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2021)
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2021)
Influence of dibenzyl ether (DBE) addition on the structure of chromium carbide coating obtained by the MOCVD method from COL "BARKHOS"
за авторством: Krokhmal, S.A., та інші
Опубліковано: (2021)
за авторством: Krokhmal, S.A., та інші
Опубліковано: (2021)
Study of nanomodification of nickel alloy GS3 with titanium carbide
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2023)
за авторством: Hlushkova, D.B., та інші
Опубліковано: (2023)
Improving the quality condition of the structure of welded joints made of rotor steel
за авторством: Dmytryk, V.V., та інші
Опубліковано: (2022)
за авторством: Dmytryk, V.V., та інші
Опубліковано: (2022)
Structure and properties of FeCr, CrAl and FeCrAl coatings deposited by cathodic arc evaporation
за авторством: Vasilenko, R.L., та інші
Опубліковано: (2021)
за авторством: Vasilenko, R.L., та інші
Опубліковано: (2021)
Structure and properties of coatings based on FeCrAl and Cr18Ni10T
за авторством: Belous, V.А., та інші
Опубліковано: (2020)
за авторством: Belous, V.А., та інші
Опубліковано: (2020)
Effect of arc current on mechanical properties of AlCrN coatings deposited using cathodic arc evaporation
за авторством: Warcholinski, B., та інші
Опубліковано: (2022)
за авторством: Warcholinski, B., та інші
Опубліковано: (2022)
Structural stability of Ti-N and Zr-N coatings at emission tests in mode of pulses
за авторством: Shirokov, B.M., та інші
Опубліковано: (2022)
за авторством: Shirokov, B.M., та інші
Опубліковано: (2022)
Electrodeposition of chromoxide coatings from electrolytes modified with SiO₂·nH₂O
за авторством: Shtefan, V.V., та інші
Опубліковано: (2022)
за авторством: Shtefan, V.V., та інші
Опубліковано: (2022)
Influence of vacuum activated diffusion chroming on mechanical properties of the surface of steel 25X1MF
за авторством: Rudenkyi, S.G., та інші
Опубліковано: (2020)
за авторством: Rudenkyi, S.G., та інші
Опубліковано: (2020)
Rare-earth permanent magnet in magnetic system of electron accelerator with the energy of 10 MеV
за авторством: Bovda, V.A., та інші
Опубліковано: (2019)
за авторством: Bovda, V.A., та інші
Опубліковано: (2019)
Kinetic regularities of the formation of gas products under the influence of ionizing radiation on biomass
за авторством: Khalilov, Z.Z., та інші
Опубліковано: (2019)
за авторством: Khalilov, Z.Z., та інші
Опубліковано: (2019)
Digital processing of optical emission spectra of magnetron sputtering plasma system
за авторством: Afanasіeva, I.A., та інші
Опубліковано: (2019)
за авторством: Afanasіeva, I.A., та інші
Опубліковано: (2019)
Studying the changes in the characteristics of radiation-protective composition materials in dependence on homogeneity of distributing of metal components
за авторством: Prokhorenko, E.M., та інші
Опубліковано: (2019)
за авторством: Prokhorenko, E.M., та інші
Опубліковано: (2019)
Effect of chromium coatings on the mechanical properties of Zr1Nb fuel claddings in longitudinal and transverse directions
за авторством: Belous, V.А., та інші
Опубліковано: (2019)
за авторством: Belous, V.А., та інші
Опубліковано: (2019)
Deposition of TiN-based coatings using vacuum arc plasma in increased negative substrate bias voltage
за авторством: Kuprin, A.S., та інші
Опубліковано: (2019)
за авторством: Kuprin, A.S., та інші
Опубліковано: (2019)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
за авторством: Novikov, V.Yu., та інші
Опубліковано: (2019)
за авторством: Novikov, V.Yu., та інші
Опубліковано: (2019)
Vacuum CVD coatings Ta on target W plate of neutrons source
за авторством: Borts, B.V., та інші
Опубліковано: (2019)
за авторством: Borts, B.V., та інші
Опубліковано: (2019)
Erosion of Co-Cr-W alloy and coating on its basis under the action of cavitation
за авторством: Kovalenko, V.I., та інші
Опубліковано: (2019)
за авторством: Kovalenko, V.I., та інші
Опубліковано: (2019)
Study of the process of thermal dissociation of tantal pentachloride in vacuum
за авторством: Polyakov, Yu.I., та інші
Опубліковано: (2019)
за авторством: Polyakov, Yu.I., та інші
Опубліковано: (2019)
The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
за авторством: Sobol', O.V., та інші
Опубліковано: (2019)
за авторством: Sobol', O.V., та інші
Опубліковано: (2019)
Схожі ресурси
-
Influence of surface pre-heating on the nitriding depth of steel 25CrMoVA used complex ion-plasma treatment
за авторством: Belous, V.A., та інші
Опубліковано: (2021) -
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
за авторством: Andrieieva, O.L., та інші
Опубліковано: (2023) -
Effect of the matrix and filler phase composition on the erosion resistance of carbon-carbon composite materials fabricated by the gas-phase infiltration method
за авторством: Gribanov, Yu.A., та інші
Опубліковано: (2020) -
Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
за авторством: Vahrusheva, V.S., та інші
Опубліковано: (2022) -
Welding of defects in cast cases of turbines with perlite electrodes without heating and thermal processing
за авторством: Efimenko, N.G., та інші
Опубліковано: (2020)