Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis
The influence of the technological parameters of the SHS process (temperature, holding time and alloying of B, Cr, Ti) on the corrosion resistance of brass with a surface alite layer, which effectively resists β-radiation, was studied. The research was carried out in 30% aqueous solutions of HNO₃, H...
Saved in:
| Published in: | Problems of Atomic Science and Technology |
|---|---|
| Date: | 2023 |
| Main Authors: | , , , |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2023
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/196108 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis / B. Sereda, I. Kryhliyak, D. Sereda, D. Kryhliyak // Problems of Atomic Science and Technology. — 2023. — № 2. — С. 130-133. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1862735086348140544 |
|---|---|
| author | Sereda, B. Kryhliyak, I. Sereda, D. Kryhliyak, D. |
| author_facet | Sereda, B. Kryhliyak, I. Sereda, D. Kryhliyak, D. |
| citation_txt | Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis / B. Sereda, I. Kryhliyak, D. Sereda, D. Kryhliyak // Problems of Atomic Science and Technology. — 2023. — № 2. — С. 130-133. — Бібліогр.: 15 назв. — англ. |
| collection | DSpace DC |
| container_title | Problems of Atomic Science and Technology |
| description | The influence of the technological parameters of the SHS process (temperature, holding time and alloying of B, Cr, Ti) on the corrosion resistance of brass with a surface alite layer, which effectively resists β-radiation, was studied. The research was carried out in 30% aqueous solutions of HNO₃, HCl, H₂SO₄. Aluminized coatings doped with silicon, which are obtained under optimal parameters, have 1.7-2.1 times higher corrosion resistance than doped B and Ti. Alloyed coatings have phases CuSi, CuAl, CuAl₂, CuTi, Ti₂Cu₃, CuCr, Cu₃Al, Cu₂Al, Al₃Si, and α-phase doped with Cr, Al, Si, B, Ti. When tested in a 30% aqueous solution of nitric acid, the coating doped with titanium and silicon shows a weight loss of 32 and 37 g/m², respectively.
Досліджено вплив технологічних параметрів СВС-процесу (температури, часу витримки та легування B, Cr, Ті) на корозійну стійкість латуні з поверхневим алітованим шаром, який ефективно протистоїть β-випромінюванню. Дослідження проводили в 30% водяних розчинах HNO₃, HCl, H₂SO₄. Алітовані покриття, леговані кремнієм, які отримані при оптимальних параметрах, мають у 1,7–2,1 рази вищу корозійну стійкість, ніж леговані B та Ti. Алітовані покриття мають фази: CuSi, CuAl, CuAl₂, CuTi, Ti₂Cu₃, CuCr, Cu₃Al, Cu₂Al, Al₃Si та α-фазу, леговану Cr, Al, Si, B, Ti. При випробуванні у 30% водному розчині HNO3 покриття, леговані титаном та кремнієм, мають втрату ваги відповідно 32 та 37 г/м².
|
| first_indexed | 2025-12-07T19:46:35Z |
| format | Article |
| fulltext | |
| id | nasplib_isofts_kiev_ua-123456789-196108 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | 1562-6016 |
| language | English |
| last_indexed | 2025-12-07T19:46:35Z |
| publishDate | 2023 |
| publisher | Національний науковий центр «Харківський фізико-технічний інститут» НАН України |
| record_format | dspace |
| spelling | Sereda, B. Kryhliyak, I. Sereda, D. Kryhliyak, D. 2023-12-10T12:57:09Z 2023-12-10T12:57:09Z 2023 Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis / B. Sereda, I. Kryhliyak, D. Sereda, D. Kryhliyak // Problems of Atomic Science and Technology. — 2023. — № 2. — С. 130-133. — Бібліогр.: 15 назв. — англ. 1562-6016 DOI: https://doi.org/10.46813/2023-144-130 https://nasplib.isofts.kiev.ua/handle/123456789/196108 621.793.6 The influence of the technological parameters of the SHS process (temperature, holding time and alloying of B, Cr, Ti) on the corrosion resistance of brass with a surface alite layer, which effectively resists β-radiation, was studied. The research was carried out in 30% aqueous solutions of HNO₃, HCl, H₂SO₄. Aluminized coatings doped with silicon, which are obtained under optimal parameters, have 1.7-2.1 times higher corrosion resistance than doped B and Ti. Alloyed coatings have phases CuSi, CuAl, CuAl₂, CuTi, Ti₂Cu₃, CuCr, Cu₃Al, Cu₂Al, Al₃Si, and α-phase doped with Cr, Al, Si, B, Ti. When tested in a 30% aqueous solution of nitric acid, the coating doped with titanium and silicon shows a weight loss of 32 and 37 g/m², respectively. Досліджено вплив технологічних параметрів СВС-процесу (температури, часу витримки та легування B, Cr, Ті) на корозійну стійкість латуні з поверхневим алітованим шаром, який ефективно протистоїть β-випромінюванню. Дослідження проводили в 30% водяних розчинах HNO₃, HCl, H₂SO₄. Алітовані покриття, леговані кремнієм, які отримані при оптимальних параметрах, мають у 1,7–2,1 рази вищу корозійну стійкість, ніж леговані B та Ti. Алітовані покриття мають фази: CuSi, CuAl, CuAl₂, CuTi, Ti₂Cu₃, CuCr, Cu₃Al, Cu₂Al, Al₃Si та α-фазу, леговану Cr, Al, Si, B, Ti. При випробуванні у 30% водному розчині HNO3 покриття, леговані титаном та кремнієм, мають втрату ваги відповідно 32 та 37 г/м². en Національний науковий центр «Харківський фізико-технічний інститут» НАН України Problems of Atomic Science and Technology Physics of radiation and ion-plasma technologies Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis Модифікація поверхні мідних сплавів алюмінієм в умовах саморозповсюджувального високотемпературного синтезу Article published earlier |
| spellingShingle | Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis Sereda, B. Kryhliyak, I. Sereda, D. Kryhliyak, D. Physics of radiation and ion-plasma technologies |
| title | Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis |
| title_alt | Модифікація поверхні мідних сплавів алюмінієм в умовах саморозповсюджувального високотемпературного синтезу |
| title_full | Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis |
| title_fullStr | Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis |
| title_full_unstemmed | Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis |
| title_short | Modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis |
| title_sort | modification of the surface of copper alloys with aluminum in the conditions of self-propagating high-temperature synthesis |
| topic | Physics of radiation and ion-plasma technologies |
| topic_facet | Physics of radiation and ion-plasma technologies |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/196108 |
| work_keys_str_mv | AT seredab modificationofthesurfaceofcopperalloyswithaluminumintheconditionsofselfpropagatinghightemperaturesynthesis AT kryhliyaki modificationofthesurfaceofcopperalloyswithaluminumintheconditionsofselfpropagatinghightemperaturesynthesis AT seredad modificationofthesurfaceofcopperalloyswithaluminumintheconditionsofselfpropagatinghightemperaturesynthesis AT kryhliyakd modificationofthesurfaceofcopperalloyswithaluminumintheconditionsofselfpropagatinghightemperaturesynthesis AT seredab modifíkacíâpoverhnímídnihsplavívalûmíníêmvumovahsamorozpovsûdžuvalʹnogovisokotemperaturnogosintezu AT kryhliyaki modifíkacíâpoverhnímídnihsplavívalûmíníêmvumovahsamorozpovsûdžuvalʹnogovisokotemperaturnogosintezu AT seredad modifíkacíâpoverhnímídnihsplavívalûmíníêmvumovahsamorozpovsûdžuvalʹnogovisokotemperaturnogosintezu AT kryhliyakd modifíkacíâpoverhnímídnihsplavívalûmíníêmvumovahsamorozpovsûdžuvalʹnogovisokotemperaturnogosintezu |