Влияние температуры подложки на прочностные характеристики покрытий, полученных методом электроискрового легирования
The influence of temperature of a processable substrate on the strength characteristics of coverings obtained by the method of ESA is investigated by using the microstructural microdurometrical analysis. It is established that a decrease of the temperature of a substrate allows one to increase the t...
Збережено в:
| Дата: | 2007 |
|---|---|
| ISSN: | 1025-6415 |
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Російська |
| Опубліковано: |
Видавничий дім "Академперіодика" НАН України
2007
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/2439 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Влияние температуры подложки на прочностные характеристики покрытий, полученных методом электроискрового легирования/ В.Ф. Мазанко, Е.Н. Храновская, Е.В. Иващенко, С.П. Ворона // Доп. НАН України. — 2007. — N 8. — С. 96-99. — Бібліогр.: 4 назв. — рос. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The influence of temperature of a processable substrate on the strength characteristics of coverings obtained by the method of ESA is investigated by using the microstructural microdurometrical analysis. It is established that a decrease of the temperature of a substrate allows one to increase the thickness of the strengthened layer by 2–5 times and the microhardness by 1.5–2.5 times depending on a material of electrodes. The increase of corrosion stability of coverings by more than 1000 times in relation to a processable material in an unconfigured state is revealed. It is supposed that this effect can be caused by the formation of a liquid-like structure of a covering.
|
|---|---|
| ISSN: | 1025-6415 |