Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
In a composite material reinforced by short random fibers, damage results from different elementary failure mechanisms such as matrix micro-cracking, fiber pull out, failure of fiber/matrix interface, failure of fibers, etc. These damages have a large influence on the macroscopic behavior of c...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2001 |
| Автори: | Bounouas, L., Benmedakhene, S., Laksimi, A., Neumann, F., Imad, A., Azari, Z. |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2001
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/46557 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites / L. Bounouas, S. Benmedakhene, A. Laksimi, F. Neumann, A. Imad, Z. Azari // Проблемы прочности. — 2001. — № 1. — С. 68-82. — Бібліогр.: 15 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineСхожі ресурси
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
за авторством: V. R. Skalskyi, та інші
Опубліковано: (2020)
за авторством: V. R. Skalskyi, та інші
Опубліковано: (2020)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
за авторством: Ji, S.J., та інші
Опубліковано: (2015)
за авторством: Ji, S.J., та інші
Опубліковано: (2015)
The influence of nanosized bacteriostat on properties of polypropylene fibers
за авторством: L. S. Dziubenko, та інші
Опубліковано: (2011)
за авторством: L. S. Dziubenko, та інші
Опубліковано: (2011)
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
за авторством: Kim, J.W.
Опубліковано: (2016)
за авторством: Kim, J.W.
Опубліковано: (2016)
Polypropylene fibers filled with carbon nanotubes: mechanical properties and biocompatibility
за авторством: Yu. I. Sementsov, та інші
Опубліковано: (2013)
за авторством: Yu. I. Sementsov, та інші
Опубліковано: (2013)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
за авторством: J. Y. Lee, та інші
Опубліковано: (2014)
за авторством: J. Y. Lee, та інші
Опубліковано: (2014)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
за авторством: Lee, J.Y., та інші
Опубліковано: (2014)
за авторством: Lee, J.Y., та інші
Опубліковано: (2014)
CT study of products from non-metallic composites reinforced by carbon fibers
за авторством: Levenets, V.V., та інші
Опубліковано: (2022)
за авторством: Levenets, V.V., та інші
Опубліковано: (2022)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
за авторством: Huang, T., та інші
Опубліковано: (2016)
за авторством: Huang, T., та інші
Опубліковано: (2016)
Effects in electrical properties of carbon-polypropylene composites
за авторством: A. S. Tonkoshkur, та інші
Опубліковано: (2016)
за авторством: A. S. Tonkoshkur, та інші
Опубліковано: (2016)
Effects in electrical properties of carbon-polypropylene composites
за авторством: A. S. Tonkoshkur, та інші
Опубліковано: (2016)
за авторством: A. S. Tonkoshkur, та інші
Опубліковано: (2016)
Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
за авторством: Ahmed Benyahia, A., та інші
Опубліковано: (2006)
за авторством: Ahmed Benyahia, A., та інші
Опубліковано: (2006)
Composite adsorbent based on polypropylene fibers with deposited layer of potassium-nickel ferrocyanide for concentration of Cs-137 from contaminated waters
за авторством: Ju. V. Bondar, та інші
Опубліковано: (2016)
за авторством: Ju. V. Bondar, та інші
Опубліковано: (2016)
Dynamic Testing of Reinforced Glass Fibre-Epoxy Composite at Elevated Temperatures
за авторством: Gieleta, R., та інші
Опубліковано: (2002)
за авторством: Gieleta, R., та інші
Опубліковано: (2002)
The mechanical performance of glass fibre reinforced composite based sandwich structure
за авторством: Xiaoli Zhu
Опубліковано: (2018)
за авторством: Xiaoli Zhu
Опубліковано: (2018)
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
за авторством: A. I. Burja, та інші
Опубліковано: (2017)
за авторством: A. I. Burja, та інші
Опубліковано: (2017)
Nano-sized phase inclusions in As₂S₃ glass, films and fibers based on this glass
за авторством: Mateleshko, N., та інші
Опубліковано: (2004)
за авторством: Mateleshko, N., та інші
Опубліковано: (2004)
Prediction of fiber-reinforced concrete strength under compression
за авторством: V. P. Sylovaniuk, та інші
Опубліковано: (2016)
за авторством: V. P. Sylovaniuk, та інші
Опубліковано: (2016)
Radiation damage of isotactic polypropylene composites with multi-walled carbon nanotubes
за авторством: Diyakon, L.V., та інші
Опубліковано: (2008)
за авторством: Diyakon, L.V., та інші
Опубліковано: (2008)
Polypropylene-carbon nanotubes composites : structural features, physical and chemical properties
за авторством: Yu. I. Sementsov, та інші
Опубліковано: (2012)
за авторством: Yu. I. Sementsov, та інші
Опубліковано: (2012)
The effect of aluminosilicate filler on the physico-mechanical characteristics of polypropylene-polycaproamide composites
за авторством: O. V. Suberliak, та інші
Опубліковано: (2014)
за авторством: O. V. Suberliak, та інші
Опубліковано: (2014)
Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
за авторством: A. I. Burja, та інші
Опубліковано: (2015)
за авторством: A. I. Burja, та інші
Опубліковано: (2015)
Influence of the experimental parameters of the optical fiber in the Quantum Key Distribution, the BB84 protocol
за авторством: L. Bouchoucha, та інші
Опубліковано: (2018)
за авторством: L. Bouchoucha, та інші
Опубліковано: (2018)
Influence of the experimental parameters of the optical fiber in the Quantum Key Distribution, the protocol BB84
за авторством: Bouchoucha, L., та інші
Опубліковано: (2018)
за авторством: Bouchoucha, L., та інші
Опубліковано: (2018)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
за авторством: Ye. Andreikiv, та інші
Опубліковано: (2018)
за авторством: Ye. Andreikiv, та інші
Опубліковано: (2018)
Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
за авторством: Verma, S., та інші
Опубліковано: (2017)
за авторством: Verma, S., та інші
Опубліковано: (2017)
Influence of high-dispersed calcite on rheology, structure, and thermostability of polypropylene-based compositions there of
за авторством: L. S. Dziubenko, та інші
Опубліковано: (2019)
за авторством: L. S. Dziubenko, та інші
Опубліковано: (2019)
Identification method of structural defects in glass fiber fabric/epoxy resin laminate
за авторством: Naceri, A.
Опубліковано: (2009)
за авторством: Naceri, A.
Опубліковано: (2009)
Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
за авторством: Daneshfar, M., та інші
Опубліковано: (2017)
за авторством: Daneshfar, M., та інші
Опубліковано: (2017)
Study of influence of structurizing regims on the properties of structural glass-fiber plastics
за авторством: Karandashov, O.H., та інші
Опубліковано: (2018)
за авторством: Karandashov, O.H., та інші
Опубліковано: (2018)
The process monitoring of a diameter of mode field of one-mode glass fibers
за авторством: Sh. Nevljudov, та інші
Опубліковано: (1998)
за авторством: Sh. Nevljudov, та інші
Опубліковано: (1998)
Experimental research on mechanical properties of desert sand steel-PVA fiber engineered cementitious composites
за авторством: Che Jialing, та інші
Опубліковано: (2017)
за авторством: Che Jialing, та інші
Опубліковано: (2017)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2019)
за авторством: Sheng, L.Y., та інші
Опубліковано: (2019)
An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
за авторством: Zhao, Z., та інші
Опубліковано: (2016)
за авторством: Zhao, Z., та інші
Опубліковано: (2016)
Examination of the cracking resistance of corrosionresisting glass-reinforced plastics by acoustic emission methods
за авторством: Naumets, V.N., та інші
Опубліковано: (1985)
за авторством: Naumets, V.N., та інші
Опубліковано: (1985)
Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
за авторством: Hobiny, A.D., та інші
Опубліковано: (2018)
за авторством: Hobiny, A.D., та інші
Опубліковано: (2018)
Study of Composite Fiber Reinforcement of Cracked Thin-Walled Pressure Vessels Utilizing Multi-Scaling Technique Based on Extended Finite Element Method
за авторством: Mirmohammad, S.H., та інші
Опубліковано: (2018)
за авторством: Mirmohammad, S.H., та інші
Опубліковано: (2018)
Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
за авторством: V. A. Dekret, та інші
Опубліковано: (2021)
за авторством: V. A. Dekret, та інші
Опубліковано: (2021)
Behavior of Strengthened Glass under High-Velocity Impact
за авторством: Vlasov, A.S., та інші
Опубліковано: (2002)
за авторством: Vlasov, A.S., та інші
Опубліковано: (2002)
Mechanical and Aging Properties of Polypropylene and Styrene-Butadiene-Styrene Composites under Outdoor and Indoor Conditions
за авторством: Yimit, M., та інші
Опубліковано: (2018)
за авторством: Yimit, M., та інші
Опубліковано: (2018)
Схожі ресурси
-
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
за авторством: V. R. Skalskyi, та інші
Опубліковано: (2020) -
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
за авторством: Ji, S.J., та інші
Опубліковано: (2015) -
The influence of nanosized bacteriostat on properties of polypropylene fibers
за авторством: L. S. Dziubenko, та інші
Опубліковано: (2011) -
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
за авторством: Kim, J.W.
Опубліковано: (2016) -
Polypropylene fibers filled with carbon nanotubes: mechanical properties and biocompatibility
за авторством: Yu. I. Sementsov, та інші
Опубліковано: (2013)