Flow Characteristics of Metal with Phase Transformation and Prediction of Its Microstructure
We propose a flow stress characteristic of
 SUS430F steel that takes in account the effects
 of temperature, strain rate and their deformation
 history. In the framework of this characteristic,
 the history effects of strain rate and
 temperature are estimated...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2002 |
| Hauptverfasser: | Shirakashi, Т., Yoshino, М. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2002
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/46757 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Flow Characteristics of Metal with Phase Transformation and
 Prediction of Its Microstructure / T. Shirakashi, M. Yoshino // Проблемы прочности. — 2002. — № 3. — С. 22-29. — Бібліогр.: 6 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Microstructure and fracture morphology of thermally sprayed refractory metals and ceramics
von: Kovarik, O., et al.
Veröffentlicht: (2008)
von: Kovarik, O., et al.
Veröffentlicht: (2008)
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
von: Janutienë, R.K., et al.
Veröffentlicht: (2015)
von: Janutienë, R.K., et al.
Veröffentlicht: (2015)
Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
von: Švec, P., et al.
Veröffentlicht: (2017)
von: Švec, P., et al.
Veröffentlicht: (2017)
Crack growth in FeP04 steel under cyclic tension for different notches on the basis of its microstructure
von: Rozumek, D.
Veröffentlicht: (2008)
von: Rozumek, D.
Veröffentlicht: (2008)
Optimization of the Microstructure and Mechanical Properties of a Laves Phase-Strengthened Hypoeutectic NiAl/Cr(Mo,W) Alloy by Suction Casting
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
Variation of Mechanical Characteristics and Microstructural Evolution in AISI 316 Austenitic Stainless Steel Subjected to Long-Term Thermal Aging at Elevated Temperature
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
Microstructural and fracture analysis of aged cast duplex steel
von: Dyja, D., et al.
Veröffentlicht: (2008)
von: Dyja, D., et al.
Veröffentlicht: (2008)
Microstructural Features and Mechanical Properties of Artificially Aged AA2024
von: Naveed Afzal, et al.
Veröffentlicht: (2013)
von: Naveed Afzal, et al.
Veröffentlicht: (2013)
Probabilistic Simulation of Shape Instability Based on the True Microstructure Model
von: Wu, G.C., et al.
Veröffentlicht: (2018)
von: Wu, G.C., et al.
Veröffentlicht: (2018)
Preparation, Properties, and Microstructure of Graphite Powder-Containing Conductive Concrete
von: Liu, S.H., et al.
Veröffentlicht: (2019)
von: Liu, S.H., et al.
Veröffentlicht: (2019)
Annealing Effect on the Microstructure and Mechanical Properties of a Thin Titanium Nitride Film
von: Her, S.C., et al.
Veröffentlicht: (2014)
von: Her, S.C., et al.
Veröffentlicht: (2014)
Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: Kim, J.M., et al.
Veröffentlicht: (2014)
von: Kim, J.M., et al.
Veröffentlicht: (2014)
Predictive Performance of Artificial Neural Network and Multiple Linear Regression Models in Predicting Adhesive Bonding Strength of Wood
von: Bardak, S., et al.
Veröffentlicht: (2016)
von: Bardak, S., et al.
Veröffentlicht: (2016)
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)
von: Zedira, H., et al.
Veröffentlicht: (2004)
Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)
von: Guo, N., et al.
Veröffentlicht: (2015)
Influence of Tantalum Addition on Microstructure and Mechanical Properties of the NiAl-Based Eutectic Alloy
von: Sheng, L.Y., et al.
Veröffentlicht: (2017)
von: Sheng, L.Y., et al.
Veröffentlicht: (2017)
Electron Backscatter Diffraction Analysis of the Microstructure Fineness in Pure Copper under Torsional Deformation
von: Wang, C.P., et al.
Veröffentlicht: (2018)
von: Wang, C.P., et al.
Veröffentlicht: (2018)
Experimental Investigation on Microstructure and Mechanical Properties of Direct Squeeze Cast Al–13%Si Alloy
von: Souissi, S., et al.
Veröffentlicht: (2012)
von: Souissi, S., et al.
Veröffentlicht: (2012)
Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
von: Tian, H.L., et al.
Veröffentlicht: (2014)
von: Tian, H.L., et al.
Veröffentlicht: (2014)
Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
Relation between Mechanical Properties and Microstructure of Cast Aluminum Alloy AlSi9Cu3
von: Panuskova, M., et al.
Veröffentlicht: (2008)
von: Panuskova, M., et al.
Veröffentlicht: (2008)
Comparison of the Effect of Different Heat Treatment Processes on Microstructure and Mechanical Properties of Stainless Steel Clad Plate
von: Jin, H.R., et al.
Veröffentlicht: (2017)
von: Jin, H.R., et al.
Veröffentlicht: (2017)
Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
von: Sheng, L.Y.
Veröffentlicht: (2016)
von: Sheng, L.Y.
Veröffentlicht: (2016)
Effect of Carburizing and Shot Peening on the Microstructure and Surface Properties of 17-CrNi6-Mo Steel
von: Lv, Y.H., et al.
Veröffentlicht: (2015)
von: Lv, Y.H., et al.
Veröffentlicht: (2015)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
Effect of Si and Mn on Microstructure and Mechanical Properties of Vacuum Suction Casting Al–4.5Cu Alloy
von: He, T., et al.
Veröffentlicht: (2018)
von: He, T., et al.
Veröffentlicht: (2018)
Prediction of residual pipeline resource taking into account the operation loading conditions
von: Banahevych, Yu.V., et al.
Veröffentlicht: (2009)
von: Banahevych, Yu.V., et al.
Veröffentlicht: (2009)
Local approach to fracture based prediction of reactor pressure vessel lifetime
von: Kotrechko, S.A., et al.
Veröffentlicht: (2009)
von: Kotrechko, S.A., et al.
Veröffentlicht: (2009)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
Strength Prediction Model of a Particle-Reinforced Shellproof Ceramic Composite
von: Ni, X.H., et al.
Veröffentlicht: (2014)
von: Ni, X.H., et al.
Veröffentlicht: (2014)
Effect of a Nonuniform Radial/Axial Tip Clearance on the Flow Field in a Mixed-Flow Pump
von: Li, W., et al.
Veröffentlicht: (2018)
von: Li, W., et al.
Veröffentlicht: (2018)
Effect of Tungsten-Inert-Gas Preheating on Mechanical and Microstructure Properties of Friction Stir Welded Dissimilar Al Alloy and Mild Steel
von: Bang, HanSur, et al.
Veröffentlicht: (2016)
von: Bang, HanSur, et al.
Veröffentlicht: (2016)
Influence of a Strain Rate and Temperature on the Crack Tip Stress and Microstructure Evolution of Monocrystalline Nickel: a Molecular Dynamics Simulation
von: Wu, W.P., et al.
Veröffentlicht: (2014)
von: Wu, W.P., et al.
Veröffentlicht: (2014)
Microstructural features of failure surfaces and low-temperature mechanical properties of Ti-6Al-4V ELI ultra-fine grained alloy
von: Tabachnikova, E.D., et al.
Veröffentlicht: (2008)
von: Tabachnikova, E.D., et al.
Veröffentlicht: (2008)
Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)
von: Guan, B., et al.
Veröffentlicht: (2018)
Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
von: Torabi, A.R., et al.
Veröffentlicht: (2017)
von: Torabi, A.R., et al.
Veröffentlicht: (2017)
Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)
A Computational Strategy for the Localization and Fracture of Laminated Composites. Part 2. Life Prediction by Mesoscale Modeling for Composite Structures
von: Boutaous, A., et al.
Veröffentlicht: (2011)
von: Boutaous, A., et al.
Veröffentlicht: (2011)
A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
von: Gharad, A. El, et al.
Veröffentlicht: (2002)
von: Gharad, A. El, et al.
Veröffentlicht: (2002)
Ähnliche Einträge
-
Microstructure and fracture morphology of thermally sprayed refractory metals and ceramics
von: Kovarik, O., et al.
Veröffentlicht: (2008) -
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
von: Janutienë, R.K., et al.
Veröffentlicht: (2015) -
Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
von: Švec, P., et al.
Veröffentlicht: (2017) -
Crack growth in FeP04 steel under cyclic tension for different notches on the basis of its microstructure
von: Rozumek, D.
Veröffentlicht: (2008) -
Optimization of the Microstructure and Mechanical Properties of a Laves Phase-Strengthened Hypoeutectic NiAl/Cr(Mo,W) Alloy by Suction Casting
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)