Experimental Study of Concrete Subjected to Explosive Loading

The main subject of this paper was to demonstrate the response of structural concrete to different imposed strain rates. Attention is focused on the strain rate about 10^-2 s^-1, where some technical difficulties are experienced when an exact determination of mechanical properties for quasi-brittle...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2002
Hauptverfasser:	Rekucki, R., Kruszka, L.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2002
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/46761
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Experimental Study of Concrete Subjected to Explosive Loading / R. Rekucki, L. Kruszka // Проблемы прочности. — 2002. — № 3. — С. 49-54. — Бібліогр.: 3 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
von: Zhao, Z., et al.
Veröffentlicht: (2016)

Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
von: Shariati, M., et al.
Veröffentlicht: (2011)

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Experimental Testing
von: Rafi, M.M.
Veröffentlicht: (2018)

Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)

Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
von: Ye, X.F., et al.
Veröffentlicht: (2018)

Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
von: Haeri, H.
Veröffentlicht: (2015)

Fracture Process in ± θ Laminates Subjected to Mode II Loading
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)

A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Analytical Modeling
von: Rafi, M.M.
Veröffentlicht: (2019)

Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)

Study of Dry and Wet Cement Mortar Dynamic Properties
von: Bragov, А., et al.
Veröffentlicht: (2002)

In service inspections of thick walled concrete sructures
von: Pecinka, L., et al.
Veröffentlicht: (2006)

Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
von: Czechowski, L., et al.
Veröffentlicht: (2013)

Thermomechanical Response of LNG Concrete Tank to Cryogenic Temperatures
von: Dahmani, L.
Veröffentlicht: (2011)

Numerical simulation of brittle damage in concrete specimens
von: Labadi, Y., et al.
Veröffentlicht: (2005)

Dynamic Testing of Reinforced Glass Fibre-Epoxy Composite at Elevated Temperatures
von: Gieleta, R., et al.
Veröffentlicht: (2002)

Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
von: Vasudevan, G., et al.
Veröffentlicht: (2013)

Crack Identification in Reinforced Concrete Beams Using ANSYS Software
von: Dahmani, L., et al.
Veröffentlicht: (2010)

Method of Prevention of Fracture of Welded Metal Structural Elements Subjected to Single Dynamic Loads
von: Kir’yan, V.I., et al.
Veröffentlicht: (2002)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)

Experimental and Theoretical Design Methodology of Hemispherical Shells under Extreme Static Loading
von: Galiev, Sh.U., et al.
Veröffentlicht: (2004)

Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements
von: Dahmani, L., et al.
Veröffentlicht: (2009)

Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)

Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)

On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
von: Ferreira, A. J. M.
Veröffentlicht: (2003)

Theoretical and Experimental Investigation of the Dissipated and Stored Energy Ratio in Iron under Quasi-Static and Cyclic Loading
von: Plekhov, O., et al.
Veröffentlicht: (2008)

Experimental Study on the Coaxing Effect of Multi-Level Stresses with Different Sequences
von: Zhao, L.H., et al.
Veröffentlicht: (2017)

Analytical Analysis of the Interfacial Stress in Damaged Reinforced Concrete Beams Strengthened by Bonded Composite Plates
von: Hassaine Daouadji, T.
Veröffentlicht: (2013)

XFEM Simulation of Pore-Induced Fracture of a Heterogeneous Concrete Beam in Three-Point Bending
von: Zhang, C.C., et al.
Veröffentlicht: (2018)

Evaluating Sensitivity of an AAR-Affected Concrete Arch Dam to the Effects of Structural Joints and Solar Radiation
von: Lamea, M., et al.
Veröffentlicht: (2015)

Flexural Fracture Toughness and First-Crack Strength Tests of Steel Fiber-Silica Fume Concrete and Its Engineering Applications
von: Zhang, J.P., et al.
Veröffentlicht: (2018)

Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)

Analysis and Experimental Study of Vibration System Characteristics of Ultrasonic Compound Electrical Machining
von: Deng, Z.Q., et al.
Veröffentlicht: (2017)

Experimental Study of Inconel 718 Surface Treatment by Edge Robotic Deburring with Force Control
von: Burghardt, A., et al.
Veröffentlicht: (2017)

Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
von: Sedighi, M., et al.
Veröffentlicht: (2012)

Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)

Accelerating Effects of Cyclic Creep Due to the Alternative Load Compared with Constant Load for CD 304L
von: Daei-Sorkhabi, A.H., et al.
Veröffentlicht: (2015)

Modal Analysis of the Turbine Blade at Complex Thermomechanical Loads
von: Witek, L., et al.
Veröffentlicht: (2016)

Registration and assessment of load cycles in pipelines
von: Torop, O., et al.
Veröffentlicht: (2009)

FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
von: Kaščák, L., et al.
Veröffentlicht: (2016)