Buchumschlag

Effect of Pores on Mechanical Behavior. Application to the Composite Material

The effects of microscopic pores, during the historical deformation on the behavior of ductile material are experimentally and numerically investigated. The material used in this study is constituted from the glass beads which are incorporated in the poly...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2002
ISSN:	0556-171X
Hauptverfasser:	Salih, A., Fassi Fehri, О., Charif d ’Ouazzane, S., Azari, Z.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2002
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/46884
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Effect of Pores on Mechanical Behavior. Application to the Composite Material / А. Sali, О. Fassi Fehri, S. Charif d ’Ouazzane, Z. Azari // Проблемы прочности. — 2002. — № 5. — С. 17-31. — Бібліогр.: 12 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2006)

Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)

Modeling of the mechanical behavior of composite at different relative humidities
von: Naceri, A.
Veröffentlicht: (2009)

Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
von: Bezazi, A., et al.
Veröffentlicht: (2009)

Analysis of fracture mechanisms and surface quality in drilling of composite materials
von: Sedlacek, J., et al.
Veröffentlicht: (2008)

Effect of Braiding Angle on the Impact and Post-Impact Behavior of 3D Braided Composites
von: Yan, S., et al.
Veröffentlicht: (2017)

Effect of the Interfacial Transition Zone on Basic Mechanical Properties of a Solid Composite Propellant
von: Shen, L.L., et al.
Veröffentlicht: (2018)

Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019)

Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008)

Mechanical behavior of Zr-based bulk metallic glasses
von: Nowak, S., et al.
Veröffentlicht: (2008)

Review: Progress in the Studies on Mechanical Properties of Materials
von: Tu, M.Y., et al.
Veröffentlicht: (2014)

Review: Progress in the Studies on Mechanical Properties of Materials
von: Tu, M.Y., et al.
Veröffentlicht: (2014)

Effect of Aging Treatment on Surface Roughness, Mechanical Properties, and Fracture Behavior of 6xxx and 7xxx Aluminum Alloys
von: Sevim, I., et al.
Veröffentlicht: (2014)

Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)

Non-Monotonous Mechanical Behavior at the Nanoscale: Elastic and Plastic Properties
von: Zhang, X., et al.
Veröffentlicht: (2015)

Experimental analysis of behavior and damage of sandwich composite materials in three-point bending. Part 1. Static tests and stiffness degradation at failure studies
von: Bezazi, A., et al.
Veröffentlicht: (2007)

The effect of damping and force application point on the non-linear dynamic behavior of a cracked beam at sub- and super-resonance vibrations
von: Bovsunovskii, A.P., et al.
Veröffentlicht: (2006)

Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002)

XFEM Simulation of Pore-Induced Fracture of a Heterogeneous Concrete Beam in Three-Point Bending
von: Zhang, C.C., et al.
Veröffentlicht: (2018)

Numerical simulation of elastic linear micropolar media based on the pore space length scale assumption
von: Jeong, J., et al.
Veröffentlicht: (2008)

Effect of the Microcrack Inclination Angle on Crack Propagation Behavior of TiAl Alloy
von: Feng, R.C., et al.
Veröffentlicht: (2017)

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)

Construction of constitutive relationships for simple in Noll’s sense materials with viscoelastic-viscoplastic behavior
von: Lepikhin, P.P.
Veröffentlicht: (2009)

Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
von: Bang, HanSur, et al.
Veröffentlicht: (2015)

On Standards for Mechanical Testing of Materials at Cryogenic Temperatures
von: Novogrudskii, L.S., et al.
Veröffentlicht: (2010)

Effect of Forging on Cyclic Hardening Behavior of CW 614 Brass Alloy
von: Mnif, R., et al.
Veröffentlicht: (2011)

Study of the Effect of Water Intake by the Matrix on the Optimization of the Fiber Matrix Interface Damage for a Composite Material by Genetic Algorithms
von: Temimi Lahouari, H., et al.
Veröffentlicht: (2013)

Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)

Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
von: Zhang, L., et al.
Veröffentlicht: (2015)

Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
von: Berto, F., et al.
Veröffentlicht: (2015)

Effect of a Liner Material on the Formation of the Wrapping ExplosivelyFormed Penetrator
von: Xu, Q.Z., et al.
Veröffentlicht: (2018)

Influence of Different Preparation Processes on the Mechanical Properties of Carbon Nanotube-Reinforced Copper Matrix Composites
von: Guo, C.H., et al.
Veröffentlicht: (2015)

Cyclic Plastic Response and Damage in Materials for High Temperature Applications
von: Polák, J., et al.
Veröffentlicht: (2014)

Study of Aging Mechanisms for Structural Materials within SAFELIFE Project
von: Sevini, F., et al.
Veröffentlicht: (2004)

Application of the Micropolar Theory to the Strength Analysis of Bioceramic Materials for Bone Reconstruction
von: Eremeyev, V.A., et al.
Veröffentlicht: (2016)

Experimental and Numerical Simulation of the Microcrack Coalescence Mechanism in Rock-Like Material
von: Haeri, H., et al.
Veröffentlicht: (2015)

Static and Dynamic Tearing of Thin Steel Sheets
von: Aberkane, M., et al.
Veröffentlicht: (2003)

Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: Kim, J.M., et al.
Veröffentlicht: (2014)

Mechanical Behavior of TiN/TiC-n Multilayer Coatings and Ti(C,N) Multicomponent Coatings Produced by PACVD
von: Azadi, M., et al.
Veröffentlicht: (2016)

A New Method for Evaluation of Mechanical Properties of Glass/Epoxy Composites at Low Temperatures
von: Shokrieh, M.M., et al.
Veröffentlicht: (2012)