Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
Within an experimental approach we describe
 the mechanical behavior of different resin-epoxy
 laminates reinforced with cross-ply Kevlar
 and glass fibers under the conditions of static
 and cyclic three-point bending. In static tests,
 we consider the effect...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2003 |
| Main Authors: | Bezazi, A.R., Mahi, A.El, Berthelot, J.-M., Bezzazi, B. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2003
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/46964 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental
 Approach / A.R. Bezazi, A El Mahi, J.-M. Berthelot, B. Bezzazi // Проблемы прочности. — 2003. — № 2. — С. 66-83. — Бібліогр.: 43 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
by: Bezazi, A., et al.
Published: (2009)
by: Bezazi, A., et al.
Published: (2009)
Experimental analysis of behavior and damage of sandwich composite materials in three-point bending. Part 1. Static tests and stiffness degradation at failure studies
by: Bezazi, A., et al.
Published: (2007)
by: Bezazi, A., et al.
Published: (2007)
Laminated cross-ply cylindrical shell due to transient heating
by: U. V. Zhydyk
Published: (2019)
by: U. V. Zhydyk
Published: (2019)
Buckling Analysis of Anti-Symmetric Cross-Ply Laminated Composite Plates under Different Boundary Conditions
by: B. Adim, et al.
Published: (2016)
by: B. Adim, et al.
Published: (2016)
Buckling Analysis of Anti-Symmetric Cross-Ply Laminated Composite Plates under Different Boundary Conditions
by: Adim, B., et al.
Published: (2016)
by: Adim, B., et al.
Published: (2016)
Flexural-flexural-longitudinal transients of launch vehicle
by: K. V. Avramov, et al.
Published: (2011)
by: K. V. Avramov, et al.
Published: (2011)
Flexural-flexural-longitudinal transients of launch vehicle
by: Аврамов, К. В., et al.
Published: (2016)
by: Аврамов, К. В., et al.
Published: (2016)
Flexural-flexural-longitudinal transients of launch vehicle
by: Аврамов, К. В., et al.
Published: (2016)
by: Аврамов, К. В., et al.
Published: (2016)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
by: Buyukkaragoz, A., et al.
Published: (2013)
by: Buyukkaragoz, A., et al.
Published: (2013)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
by: A. Buyukkaragoz, et al.
Published: (2013)
by: A. Buyukkaragoz, et al.
Published: (2013)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
by: Putic, S., et al.
Published: (2003)
by: Putic, S., et al.
Published: (2003)
Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
by: Ahmed Benyahia, A., et al.
Published: (2006)
by: Ahmed Benyahia, A., et al.
Published: (2006)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
by: Fan, X.L., et al.
Published: (2014)
by: Fan, X.L., et al.
Published: (2014)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
by: X. L. Fan, et al.
Published: (2014)
by: X. L. Fan, et al.
Published: (2014)
Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
by: Vasudevan, G., et al.
Published: (2013)
by: Vasudevan, G., et al.
Published: (2013)
Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
by: G. Vasudevan, et al.
Published: (2013)
by: G. Vasudevan, et al.
Published: (2013)
Stress-strain state of the plates of zero flexure
by: A. M. Smoliar, et al.
Published: (2015)
by: A. M. Smoliar, et al.
Published: (2015)
Theoretical-experimental approach to estimation of fatigue crack growth in hydrogenated materials
by: Ya. L. Ivanytskyi, et al.
Published: (2010)
by: Ya. L. Ivanytskyi, et al.
Published: (2010)
The criterion of relative power and the flexural-strength approach in the interpretation of the folding of a single layer
by: Gonchar, V. V.
Published: (2010)
by: Gonchar, V. V.
Published: (2010)
Conceptual approaches to the research of the behavior of cross-border interaction actors
by: I. R. Tymechko
Published: (2014)
by: I. R. Tymechko
Published: (2014)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
by: Haq, A.U., et al.
Published: (2018)
by: Haq, A.U., et al.
Published: (2018)
Development of Ground-Water Water-Heat Exchangers for Heat Pump Technologies of the Heat Sup ply of Premises
by: B. I. Basok, et al.
Published: (2012)
by: B. I. Basok, et al.
Published: (2012)
Transformation of flexural waves on the vertical boundary in a stepwise waveguide
by: N. S. Horodetska, et al.
Published: (2014)
by: N. S. Horodetska, et al.
Published: (2014)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
by: Huang, T., et al.
Published: (2016)
by: Huang, T., et al.
Published: (2016)
Effects warmly and formcreature of opening at boring of laminates
by: L. M. Murzin, et al.
Published: (2009)
by: L. M. Murzin, et al.
Published: (2009)
Microstrip Antenna Arrays with Laminated Dielectric Covering
by: Seleznev, D. G., et al.
Published: (2013)
by: Seleznev, D. G., et al.
Published: (2013)
On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
by: Ferreira, A. J. M.
Published: (2003)
by: Ferreira, A. J. M.
Published: (2003)
Longitudinal-flexural vibrations of a three-layered rod. A refined model
by: S. S. Kurennov
Published: (2014)
by: S. S. Kurennov
Published: (2014)
Parametric vibrations of laminated plates of complex form
by: L. V. Kurpa, et al.
Published: (2013)
by: L. V. Kurpa, et al.
Published: (2013)
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
by: Slota, J., et al.
Published: (2017)
by: Slota, J., et al.
Published: (2017)
Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
by: Gogotsi, G.A., et al.
Published: (2004)
by: Gogotsi, G.A., et al.
Published: (2004)
Mechanized welding of laminated PVC fabrics with heated air
by: M. H. Korab, et al.
Published: (2020)
by: M. H. Korab, et al.
Published: (2020)
Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
by: Konecna, R., et al.
Published: (2008)
by: Konecna, R., et al.
Published: (2008)
Determination of residual lifetime of the two-ply plates with a system of cracks under action of long-term static loading and high temperature
by: Ye. Andreikiv, et al.
Published: (2016)
by: Ye. Andreikiv, et al.
Published: (2016)
Fracture Process in ± θ Laminates Subjected to Mode II Loading
by: Ahmed Benyahia, A., et al.
Published: (2002)
by: Ahmed Benyahia, A., et al.
Published: (2002)
Experimental and theoretical analysis of fatigue properties of liner for the large pressure equipment
by: Feng Xianzhang, et al.
Published: (2016)
by: Feng Xianzhang, et al.
Published: (2016)
Fabrication of laminated metal-intermetallic reinforced composite material
by: I. M. Huriia, et al.
Published: (2019)
by: I. M. Huriia, et al.
Published: (2019)
Flexural Fracture Toughness and First-Crack Strength Tests of Steel Fiber-Silica Fume Concrete and Its Engineering Applications
by: Zhang, J.P., et al.
Published: (2018)
by: Zhang, J.P., et al.
Published: (2018)
Nearsurface buckling in laminate composite material with imperfect interlayer contact
by: V. M. Bystrov, et al.
Published: (2022)
by: V. M. Bystrov, et al.
Published: (2022)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Similar Items
-
Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
by: Bezazi, A., et al.
Published: (2009) -
Experimental analysis of behavior and damage of sandwich composite materials in three-point bending. Part 1. Static tests and stiffness degradation at failure studies
by: Bezazi, A., et al.
Published: (2007) -
Laminated cross-ply cylindrical shell due to transient heating
by: U. V. Zhydyk
Published: (2019) -
Buckling Analysis of Anti-Symmetric Cross-Ply Laminated Composite Plates under Different Boundary Conditions
by: B. Adim, et al.
Published: (2016) -
Buckling Analysis of Anti-Symmetric Cross-Ply Laminated Composite Plates under Different Boundary Conditions
by: Adim, B., et al.
Published: (2016)