Buchumschlag

Fracture Resistance of Residually-Stressed Ceramic Laminated Structures

We have studied the effect of residual stresses on fracture resistance and crack arrest behavior of asymmetric ceramic laminated Si3N4 /Si3N4 -TiN structures. Using a compliance method, we assessed is the technique of R-curve construction for laminar comp...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2004
Hauptverfasser:	Gogotsi, G.A., Lugovoi, N.I., Slyunyaev, V.N.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2004
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/47094
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Fracture Resistance of Residually-Stressed Ceramic Laminated Structures / G.A. Gogotsi, N.I. Lugovoi, and V.N. Slyunyaev // Проблемы прочности. — 2004. — № 3. — С. 95-111. — Бібліогр.: 19 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Fracture resistance of ceramics: edge fracture method
von: Gogotsi, G.A., et al.
Veröffentlicht: (2005)

Fracture Process in ± θ Laminates Subjected to Mode II Loading
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)

A Computational Strategy for the Localization and Fracture of Laminated Composites. Part 2. Life Prediction by Mesoscale Modeling for Composite Structures
von: Boutaous, A., et al.
Veröffentlicht: (2011)

Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016)

Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)

Interlaminar Fracture Toughness Estimation of Aerospace Composites by Weighted Residual Approach
von: Alfred Franklin, V., et al.
Veröffentlicht: (2015)

Microstructure and fracture morphology of thermally sprayed refractory metals and ceramics
von: Kovarik, O., et al.
Veröffentlicht: (2008)

Identification method of structural defects in glass fiber fabric/epoxy resin laminate
von: Naceri, A.
Veröffentlicht: (2009)

A Computational Strategy for the Localization and Fracture of Laminated Composites. Part 1. Development of a Localization Criterion Adapted to Model Damage Evolution Time-Delay
von: Boutaous, A., et al.
Veröffentlicht: (2011)

Real-Time Substructure Tests and Numerical Simulation of Mechanical Characteristics of Natural Rubber-Laminated Bearings
von: Peng, T.B., et al.
Veröffentlicht: (2018)

Optimization of Residual Stresses in Laser-Mixed WC(Co,Ni) Coatings
von: Liu, C.W., et al.
Veröffentlicht: (2019)

Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2006)

Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Wang, Y.X., et al.
Veröffentlicht: (2014)

Effect of Grinding Conditions of a TC4 Titanium Alloy on Its Residual Surface Stresses
von: Li, J., et al.
Veröffentlicht: (2015)

Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)

Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joints
von: Stepanov, G.V., et al.
Veröffentlicht: (2008)

Allowing for residual stresses in the cross-sections of compressed l-shaped columns during their design
von: Golodnov, A.I.
Veröffentlicht: (2001)

Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
von: Zrilic, M., et al.
Veröffentlicht: (2004)

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)

Interfacial Fracture Toughness of Multilayer Composite Structures
von: Her, S.-C., et al.
Veröffentlicht: (2015)

Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
von: Sedighi, M., et al.
Veröffentlicht: (2012)

Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)

Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)

On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
von: Ferreira, A. J. M.
Veröffentlicht: (2003)

Stacking layer sequence effects for glass fibre/epoxy resin cross-ply laminates
von: Harkati, E.H., et al.
Veröffentlicht: (2007)

Evaluation of Residual Stresses in Carbon/Carbon Composites Components Joined to Copper before and after Pulse Electromagnetic Treatment
von: Stepanov, G.V., et al.
Veröffentlicht: (2011)

Analysis of Residual Stresses during Heat Treatment of Large Forged Shafts Considering Transformation Plasticity and Creep Deformation
von: Yanagisawa, Y., et al.
Veröffentlicht: (2017)

Fracture Investigation of Wood under Mixed Mode I/II Loading Based on Maximum Shear Stress Criterion
von: Fakoor, M., et al.
Veröffentlicht: (2013)

Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)

Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)

Localization of plastic deformation and fracture in aluminum polycrystals
von: Zarikovskaya, N.V., et al.
Veröffentlicht: (2008)

Strength Prediction Model of a Particle-Reinforced Shellproof Ceramic Composite
von: Ni, X.H., et al.
Veröffentlicht: (2014)

Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002)

Fracture toughness of multilayer pipes
von: Nezbedova, E., et al.
Veröffentlicht: (2008)

Two-parametrical fracture criterion
von: Ziliukas, A.
Veröffentlicht: (2006)

Method of Prevention of Fracture of Welded Metal Structural Elements Subjected to Single Dynamic Loads
von: Kir’yan, V.I., et al.
Veröffentlicht: (2002)

Review of new formats for fracture mechanics parameters
von: Landes, J.D., et al.
Veröffentlicht: (2006)

Fracture of Polymethylmethacrylate under Pulse Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)

Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
von: Li, D.S., et al.
Veröffentlicht: (2014)

Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy
von: Chen, D.C., et al.
Veröffentlicht: (2015)