Fatigue Life Prediction of Welded Box Structures
The objective of this study is to predict fatigue life of metal welded boxes. Experimental results of fatigue life are satisfactory predicted using an analytical scheme based on the volumetric approach. Проведено прогнозирование усталостной долговечности сварных коробчатых конструкций. Результа...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2004 |
| Main Authors: | Zedira, H., Gilgert, J., Boumaza, A., Jodin, P., Azari, Z., Pluvinage, G. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2004
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/47131 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Fatigue Life Prediction of Welded Box Structures / H. Zedira, J. Gilgert, A. Boumaza, P. Jodin, Z. Azari, G. Pluvinage // Проблемы прочности. — 2004. — № 6. — С. 17-25. — Бібліогр.: 7 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
by: Gharad, A. El, et al.
Published: (2002)
by: Gharad, A. El, et al.
Published: (2002)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
by: Liu, Y.Q., et al.
Published: (2016)
by: Liu, Y.Q., et al.
Published: (2016)
Fatigue life of welded joints according to energy criteria in the critical plane
by: Lagoda, T.
Published: (2006)
by: Lagoda, T.
Published: (2006)
A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
by: Zhao, W., et al.
Published: (2015)
by: Zhao, W., et al.
Published: (2015)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
by: Zhao, L.H., et al.
Published: (2018)
by: Zhao, L.H., et al.
Published: (2018)
Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
by: Gopkalo, A.P.
Published: (2009)
by: Gopkalo, A.P.
Published: (2009)
Improved Method of Fatigue Life Assessment for TiAl Alloys
by: Feng, R.C., et al.
Published: (2014)
by: Feng, R.C., et al.
Published: (2014)
Study on Fatigue Life of Plow Bit under Different Planning Parameters
by: Zhang, Q., et al.
Published: (2014)
by: Zhang, Q., et al.
Published: (2014)
Evaluation of the Dynamic Characteristics of AZ91D Crankcase Covers and Boxes
by: Zhang, L., et al.
Published: (2015)
by: Zhang, L., et al.
Published: (2015)
Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep
by: Pokrovskii, V.V., et al.
Published: (2009)
by: Pokrovskii, V.V., et al.
Published: (2009)
Static and Dynamic Tearing of Thin Steel Sheets
by: Aberkane, M., et al.
Published: (2003)
by: Aberkane, M., et al.
Published: (2003)
Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
by: Adib, H., et al.
Published: (2004)
by: Adib, H., et al.
Published: (2004)
Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
by: Xua, L., et al.
Published: (2019)
by: Xua, L., et al.
Published: (2019)
Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
by: Ye, X.F., et al.
Published: (2018)
by: Ye, X.F., et al.
Published: (2018)
Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
by: Minor, H. El, et al.
Published: (2002)
by: Minor, H. El, et al.
Published: (2002)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
by: Zapletal, J., et al.
Published: (2008)
by: Zapletal, J., et al.
Published: (2008)
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
by: Karolczuk, A., et al.
Published: (2008)
by: Karolczuk, A., et al.
Published: (2008)
Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
by: Uematsu, Y., et al.
Published: (2008)
by: Uematsu, Y., et al.
Published: (2008)
A Computational Strategy for the Localization and Fracture of Laminated Composites. Part 2. Life Prediction by Mesoscale Modeling for Composite Structures
by: Boutaous, A., et al.
Published: (2011)
by: Boutaous, A., et al.
Published: (2011)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2017)
by: Hu, X.L., et al.
Published: (2017)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2019)
by: Hu, X.L., et al.
Published: (2019)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
by: Haq, A.U., et al.
Published: (2018)
by: Haq, A.U., et al.
Published: (2018)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
by: Kielbasa, B., et al.
Published: (2017)
by: Kielbasa, B., et al.
Published: (2017)
Size effect in contact fatigue
by: Sosnovskii, L.A., et al.
Published: (2009)
by: Sosnovskii, L.A., et al.
Published: (2009)
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
by: Ferro, P., et al.
Published: (2016)
by: Ferro, P., et al.
Published: (2016)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
by: Major, S., et al.
Published: (2008)
by: Major, S., et al.
Published: (2008)
Wear-fatigue test methods and their significance
by: Bahdanovich, A.V., et al.
Published: (2009)
by: Bahdanovich, A.V., et al.
Published: (2009)
Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
by: Bezazi, A.R., et al.
Published: (2003)
by: Bezazi, A.R., et al.
Published: (2003)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
by: Feng, R.C., et al.
Published: (2014)
by: Feng, R.C., et al.
Published: (2014)
Probabilistic Fatigue Crack Initiation and Propagation Fields Using the Strain Energy Density
by: Correia, J.A.F.O., et al.
Published: (2018)
by: Correia, J.A.F.O., et al.
Published: (2018)
Thermal Fatigue Resistance of Bionic Compacted Graphite Cast Iron Treated with the Twice Laser Process in Water
by: Liu, Y., et al.
Published: (2015)
by: Liu, Y., et al.
Published: (2015)
A model of fatigue crack propagation in metals
by: Yakovleva, T.Yu., et al.
Published: (2009)
by: Yakovleva, T.Yu., et al.
Published: (2009)
Tensile strength of the brittle materials, probabilistic or deterministic approach?
by: Jeong, J., et al.
Published: (2006)
by: Jeong, J., et al.
Published: (2006)
Structural Strength and Service Life of the Extrusion Forming Die for Agricultural Engine Piston Heads
by: Yang, L.Q., et al.
Published: (2018)
by: Yang, L.Q., et al.
Published: (2018)
Simulation of the Spindle Coupled Multi-Axial Loading Fatigue Test of a Rear Axle
by: Dong, Z., et al.
Published: (2017)
by: Dong, Z., et al.
Published: (2017)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
by: Bounouas, L., et al.
Published: (2001)
by: Bounouas, L., et al.
Published: (2001)
Fatigue of NPP Components and Piping under Service Conditions
by: Filatov, V.M.
Published: (2004)
by: Filatov, V.M.
Published: (2004)
An Improved Projection Method for Determination of Fatigue Parameters of Metal Structures Based on Spherical Direction Cosine Group Construction
by: Yang, B., et al.
Published: (2016)
by: Yang, B., et al.
Published: (2016)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
by: Wang, X.R., et al.
Published: (2018)
by: Wang, X.R., et al.
Published: (2018)
Similar Items
-
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
by: Gharad, A. El, et al.
Published: (2002) -
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
by: Liu, Y.Q., et al.
Published: (2016) -
Fatigue life of welded joints according to energy criteria in the critical plane
by: Lagoda, T.
Published: (2006) -
A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
by: Zhao, W., et al.
Published: (2015) -
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
by: Zhao, L.H., et al.
Published: (2018)