Buchumschlag

In service inspections of thick walled concrete sructures

Ageing management and renewal of the operating license of existing NPP’s are at present the main problems of nuclear power industry. For the ageing management of concrete structures the OECD-Nuclear Energy Agency, Committee on the Safety on Nuclear Instal...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2006
Hauptverfasser:	Pecinka, L., Moravka, S.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2006
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/47803
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	In service inspections of thick walled concrete sructures / L. Pecinka, S. Moravka // Проблемы прочности. — 2006. — № 4. — С. 64-78. — Бібліогр.: 4 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Electro-Thermo-Mechanical Response of Thick-Walled Piezoelectric Cylinder Reinforced by Boron-Nitride Nanotubes
von: Ghorbanpour Arani, A., et al.
Veröffentlicht: (2013)

Experimental Study of Concrete Subjected to Explosive Loading
von: Rekucki, R., et al.
Veröffentlicht: (2002)

Thermomechanical Response of LNG Concrete Tank to Cryogenic Temperatures
von: Dahmani, L.
Veröffentlicht: (2011)

Numerical simulation of brittle damage in concrete specimens
von: Labadi, Y., et al.
Veröffentlicht: (2005)

Mechanical Stresses and Crack Analysis of Concrete under the Hygrothermic Effect
von: Dahmani, L.
Veröffentlicht: (2011)

Crack Identification in Reinforced Concrete Beams Using ANSYS Software
von: Dahmani, L., et al.
Veröffentlicht: (2010)

Preparation, Properties, and Microstructure of Graphite Powder-Containing Conductive Concrete
von: Liu, S.H., et al.
Veröffentlicht: (2019)

Analysis of Crack Coalescence in Concrete Using Neural Networks
von: Haeri, H., et al.
Veröffentlicht: (2016)

An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
von: Zhao, Z., et al.
Veröffentlicht: (2016)

Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements
von: Dahmani, L., et al.
Veröffentlicht: (2009)

Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)

Pipeline life extension and integrity management based on optimized use of above ground survey data and inline inspection results
von: Francis, A., et al.
Veröffentlicht: (2009)

A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Analytical Modeling
von: Rafi, M.M.
Veröffentlicht: (2019)

Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Experimental Testing
von: Rafi, M.M.
Veröffentlicht: (2018)

On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
von: Ferreira, A. J. M.
Veröffentlicht: (2003)

Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
von: Ye, X.F., et al.
Veröffentlicht: (2018)

Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)

Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)

Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
von: Haeri, H.
Veröffentlicht: (2015)

Evaluating Sensitivity of an AAR-Affected Concrete Arch Dam to the Effects of Structural Joints and Solar Radiation
von: Lamea, M., et al.
Veröffentlicht: (2015)

Analytical Analysis of the Interfacial Stress in Damaged Reinforced Concrete Beams Strengthened by Bonded Composite Plates
von: Hassaine Daouadji, T.
Veröffentlicht: (2013)

XFEM Simulation of Pore-Induced Fracture of a Heterogeneous Concrete Beam in Three-Point Bending
von: Zhang, C.C., et al.
Veröffentlicht: (2018)

Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
von: Vasudevan, G., et al.
Veröffentlicht: (2013)

Flexural Fracture Toughness and First-Crack Strength Tests of Steel Fiber-Silica Fume Concrete and Its Engineering Applications
von: Zhang, J.P., et al.
Veröffentlicht: (2018)

Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)

Simulation of the Lightweight Ceramic/Aluminum Alloy Composite Armor for Optimizing Component Thickness Ratios
von: Chang, Z.-L., et al.
Veröffentlicht: (2019)

Strength of Reactive Powder Concrete Beam-Column Joints Reinforced with High-Strength (HRB600) Bars under Seismic Loading
von: Wang, D.H., et al.
Veröffentlicht: (2017)

Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
von: Bang, HanSur, et al.
Veröffentlicht: (2015)

Research on Rapidly Shaped Charge Cutting Technology of Aircraft Damaged Thin-Wall Structure
von: Cui, A.Y., et al.
Veröffentlicht: (2016)

Centrifuge Simulation of the Thermal Response of a Dry Sand-Embedded Diaphragm Wall
von: You, S., et al.
Veröffentlicht: (2019)

Creep Failure Time of Thin-Walled Pipes under Combined Internal Pressure, Bending, and Tension
von: El Megharbel, A.
Veröffentlicht: (2010)

An Algorithm for Estimating Minimum Strength of Thin-Walled Structures to Resist Elastic Buckling under Pressure
von: Ishinabe, M., et al.
Veröffentlicht: (2012)

Study of the Effect of Different Industrial Coating with Microscale Thickness on the CK45 Steel by Experimental and Finite Element Methods
von: Kashvzadeh, K.R., et al.
Veröffentlicht: (2013)

Fatigue of NPP Components and Piping under Service Conditions
von: Filatov, V.M.
Veröffentlicht: (2004)

Study of Composite Fiber Reinforcement of Cracked Thin-Walled Pressure Vessels Utilizing Multi-Scaling Technique Based on Extended Finite Element Method
von: Mirmohammad, S.H., et al.
Veröffentlicht: (2018)

Service loading test as a source for the fatigue curve parameters’ estimation
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)

Structural Strength and Service Life of the Extrusion Forming Die for Agricultural Engine Piston Heads
von: Yang, L.Q., et al.
Veröffentlicht: (2018)

Nonlinear dynamic finite element analysis of thick transversely flexible sandwich panel on elastic foundation with account of damage progression in time. Part 2. 3D analysis and time integration
von: Perel, V.Y.
Veröffentlicht: (2005)