An equivalent uniaxial fatigue stress model for analyzing landing gear fuse pins
We study the biaxial stress state conditions in landing gear fuse pins in the fuse groove. This biaxial state comprises a combination of shear stresses which are usually the largest stresses in the fuse pin by design, and compressive stresses which keep the half-section of the fuse pin i...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2006 |
| Hauptverfasser: | Narayan, K., Behdinan, K., Vanderpol, P. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2006
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/47851 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | An equivalent uniaxial fatigue stress model for analyzing landing gear fuse pins / K. Narayan, K. Behdinan, P. Vanderpol // Проблемы прочности. — 2006. — № 3. — С. 85-98. — Бібліогр.: 9 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Vibration Analysis of a Low-Power Reduction Gear
von: Noga, S., et al.
Veröffentlicht: (2016)
von: Noga, S., et al.
Veröffentlicht: (2016)
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
von: Wei, Y.H., et al.
Veröffentlicht: (2019)
von: Wei, Y.H., et al.
Veröffentlicht: (2019)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)
von: Zapletal, J., et al.
Veröffentlicht: (2008)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002)
von: Minor, H. El, et al.
Veröffentlicht: (2002)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Size effect in contact fatigue
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)
von: Ferro, P., et al.
Veröffentlicht: (2016)
Wear-fatigue test methods and their significance
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)
von: Zedira, H., et al.
Veröffentlicht: (2004)
A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
von: Uematsu, Y., et al.
Veröffentlicht: (2008)
von: Uematsu, Y., et al.
Veröffentlicht: (2008)
Elastic properties of B19’ structure of NiTi alloy under uniaxial and hydrostatic loading from first principles
von: Sestak, P., et al.
Veröffentlicht: (2008)
von: Sestak, P., et al.
Veröffentlicht: (2008)
Fatigue of NPP Components and Piping under Service Conditions
von: Filatov, V.M.
Veröffentlicht: (2004)
von: Filatov, V.M.
Veröffentlicht: (2004)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
von: Wang, X.R., et al.
Veröffentlicht: (2018)
von: Wang, X.R., et al.
Veröffentlicht: (2018)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
Corrosion fatigue behavior of extruded AZ80, AZ61, and AM60 magnesium alloys in distilled water
von: Uematsu, Y., et al.
Veröffentlicht: (2008)
von: Uematsu, Y., et al.
Veröffentlicht: (2008)
Recent developments to improve the quality and economics of testing for fatigue and fracture
von: Sunder, R.
Veröffentlicht: (2009)
von: Sunder, R.
Veröffentlicht: (2009)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
In situ scanning electron microscopy study of fatigue crack propagation
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
Method of the shortcut estimation of rails reliability by the fatigue strength criterion
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
Fatigue life of welded joints according to energy criteria in the critical plane
von: Lagoda, T.
Veröffentlicht: (2006)
von: Lagoda, T.
Veröffentlicht: (2006)
A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
von: Zhao, W., et al.
Veröffentlicht: (2015)
von: Zhao, W., et al.
Veröffentlicht: (2015)
Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
von: Konecna, R., et al.
Veröffentlicht: (2008)
von: Konecna, R., et al.
Veröffentlicht: (2008)
Service loading test as a source for the fatigue curve parameters’ estimation
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
Study on Fatigue Life of Plow Bit under Different Planning Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2014)
von: Zhang, Q., et al.
Veröffentlicht: (2014)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
von: Major, S., et al.
Veröffentlicht: (2008)
von: Major, S., et al.
Veröffentlicht: (2008)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
von: Berto, F., et al.
Veröffentlicht: (2015)
von: Berto, F., et al.
Veröffentlicht: (2015)
Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
von: Gopkalo, A.P.
Veröffentlicht: (2009)
von: Gopkalo, A.P.
Veröffentlicht: (2009)
Probabilistic Fatigue Crack Initiation and Propagation Fields Using the Strain Energy Density
von: Correia, J.A.F.O., et al.
Veröffentlicht: (2018)
von: Correia, J.A.F.O., et al.
Veröffentlicht: (2018)
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2015)
von: Yang, B., et al.
Veröffentlicht: (2015)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)
von: Putic, S., et al.
Veröffentlicht: (2003)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
Simulation of the Spindle Coupled Multi-Axial Loading Fatigue Test of a Rear Axle
von: Dong, Z., et al.
Veröffentlicht: (2017)
von: Dong, Z., et al.
Veröffentlicht: (2017)
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Vibration Analysis of a Low-Power Reduction Gear
von: Noga, S., et al.
Veröffentlicht: (2016) -
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
von: Wei, Y.H., et al.
Veröffentlicht: (2019) -
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008) -
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018) -
Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002)