Stress intensity solutions for cracked plates by the dual boundary method
This paper presents the application o f the dual boundary element method for the determination o f stress intensity factors in plate bending problems. The loadings considered include internal pressure, and also combined bending and tension. Mixed mode stress intensity factors are evaluated by a crac...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2007 |
| ISSN: | 0556-171X |
| Hauptverfasser: | Sahli, A., Boutchicha, D., Belarbi, A., Rahmani, O. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2007
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/48100 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Stress intensity solutions for cracked plates by the dual boundary method / A. Sahli, D. Boutchicha, A. Belarbi, O. Rahmani // Проблемы прочности. — 2007. — № 5. — С. 81-93. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Dynamic Stress Intensity Factor for Interfacial Cracks of Mode III Emanating from Circular Cavities in Piezoelectric Bimaterials
von: Li, D., et al.
Veröffentlicht: (2016)
von: Li, D., et al.
Veröffentlicht: (2016)
Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002)
von: Minor, H. El, et al.
Veröffentlicht: (2002)
Mechanical Stresses and Crack Analysis of Concrete under the Hygrothermic Effect
von: Dahmani, L.
Veröffentlicht: (2011)
von: Dahmani, L.
Veröffentlicht: (2011)
Effects of Geometrical Parameters on the Stress Field of Three-Dimensional Plates Weakened by Periodic Notches
von: Amini, A., et al.
Veröffentlicht: (2014)
von: Amini, A., et al.
Veröffentlicht: (2014)
Numerical Analysis of Crack Propagation Path Using an Advanced Element Cracking Method
von: Zhong, Z.P., et al.
Veröffentlicht: (2014)
von: Zhong, Z.P., et al.
Veröffentlicht: (2014)
Numerical simulation of stress-strain state near crack tip in a compact tensile specimen
von: Kotlyarenko, A.A., et al.
Veröffentlicht: (2009)
von: Kotlyarenko, A.A., et al.
Veröffentlicht: (2009)
Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis
von: Wang, Y.Q., et al.
Veröffentlicht: (2018)
von: Wang, Y.Q., et al.
Veröffentlicht: (2018)
Fiber Laser Welding of Dual-Phase and Bake-Hardened Steels
von: Švec, P., et al.
Veröffentlicht: (2016)
von: Švec, P., et al.
Veröffentlicht: (2016)
Analytical Analysis of the Interfacial Stress in Damaged Reinforced Concrete Beams Strengthened by Bonded Composite Plates
von: Hassaine Daouadji, T.
Veröffentlicht: (2013)
von: Hassaine Daouadji, T.
Veröffentlicht: (2013)
An Alternative Approach to the Fracture Toughness of Dual Phase Steels
von: Ulu, S., et al.
Veröffentlicht: (2013)
von: Ulu, S., et al.
Veröffentlicht: (2013)
Analysis of Vibration Natural Frequencies of Rotationally Restrained and Simply Supported Circular Plate with Weakened Interior Circle Due to an Angular Crack
von: Bhaskara Rao, L., et al.
Veröffentlicht: (2015)
von: Bhaskara Rao, L., et al.
Veröffentlicht: (2015)
Grain boundary influence during short fatigue crack growth using a discrete dislocation technique
von: Hansson, P., et al.
Veröffentlicht: (2008)
von: Hansson, P., et al.
Veröffentlicht: (2008)
Finite Element Method for Evaluating Rising and Slip of Column–Base Plate for Usual Connections
von: Hamizi, M., et al.
Veröffentlicht: (2011)
von: Hamizi, M., et al.
Veröffentlicht: (2011)
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
von: Kaščák, L., et al.
Veröffentlicht: (2016)
von: Kaščák, L., et al.
Veröffentlicht: (2016)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016)
von: Song, X., et al.
Veröffentlicht: (2016)
Influence of a Strain Rate and Temperature on the Crack Tip Stress and Microstructure Evolution of Monocrystalline Nickel: a Molecular Dynamics Simulation
von: Wu, W.P., et al.
Veröffentlicht: (2014)
von: Wu, W.P., et al.
Veröffentlicht: (2014)
Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
von: Švec, P., et al.
Veröffentlicht: (2017)
von: Švec, P., et al.
Veröffentlicht: (2017)
Formability of Tailor-Welded Blanks from Dual-Phase and Bake-Hardened Steels with a Planar Anisotropy Influence
von: Schrek, A., et al.
Veröffentlicht: (2017)
von: Schrek, A., et al.
Veröffentlicht: (2017)
Evaluation of the elastic-plastic mixity barameters on the base of different crack propagation criteria. Part 2. Solution and results
von: Shlyannikov, V.N., et al.
Veröffentlicht: (2005)
von: Shlyannikov, V.N., et al.
Veröffentlicht: (2005)
Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
von: Haeri, H.
Veröffentlicht: (2015)
von: Haeri, H.
Veröffentlicht: (2015)
On the Strength and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens under Uniaxial Compression
von: Haeri, H., et al.
Veröffentlicht: (2014)
von: Haeri, H., et al.
Veröffentlicht: (2014)
Analysis of thin isotropic rectangular and circular plates with multiquadrics
von: Ferreira, A.J.M., et al.
Veröffentlicht: (2005)
von: Ferreira, A.J.M., et al.
Veröffentlicht: (2005)
Cyclic cracking resistance of brittle materials in compressive loading
von: Lanin, A.G.
Veröffentlicht: (2009)
von: Lanin, A.G.
Veröffentlicht: (2009)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Evaluation by a finite element method of the flexibility factor and fixity degree for the base plate connections commonly used
von: Hamizi, M., et al.
Veröffentlicht: (2007)
von: Hamizi, M., et al.
Veröffentlicht: (2007)
A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
Crack Identification in Reinforced Concrete Beams Using ANSYS Software
von: Dahmani, L., et al.
Veröffentlicht: (2010)
von: Dahmani, L., et al.
Veröffentlicht: (2010)
Analysis of Crack Coalescence in Concrete Using Neural Networks
von: Haeri, H., et al.
Veröffentlicht: (2016)
von: Haeri, H., et al.
Veröffentlicht: (2016)
Dynamic Response of Pavement Plates to the Positive and Negative Phases of the Friedlander Load
von: Alisjahbana, S.W., et al.
Veröffentlicht: (2018)
von: Alisjahbana, S.W., et al.
Veröffentlicht: (2018)
Fatigue Limits of Steels and Stress Gradient
von: Troshchenko, V.T., et al.
Veröffentlicht: (2011)
von: Troshchenko, V.T., et al.
Veröffentlicht: (2011)
Probabilistic Fatigue Crack Initiation and Propagation Fields Using the Strain Energy Density
von: Correia, J.A.F.O., et al.
Veröffentlicht: (2018)
von: Correia, J.A.F.O., et al.
Veröffentlicht: (2018)
Analysis of Longitudinal Cracks in Multilayered Beams with Account of the Material Nonlinearity
von: Rizov, V.I.
Veröffentlicht: (2017)
von: Rizov, V.I.
Veröffentlicht: (2017)
In situ scanning electron microscopy study of fatigue crack propagation
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Micromechanical Coupled Study of Crack Growth Initiation Criterion in Pressure Vessel Steel
von: Rakin, M., et al.
Veröffentlicht: (2004)
von: Rakin, M., et al.
Veröffentlicht: (2004)
Study of Composite Fiber Reinforcement of Cracked Thin-Walled Pressure Vessels Utilizing Multi-Scaling Technique Based on Extended Finite Element Method
von: Mirmohammad, S.H., et al.
Veröffentlicht: (2018)
von: Mirmohammad, S.H., et al.
Veröffentlicht: (2018)
Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)
Numerical and Experimental Analyses of Vibrations of Annular Plates with Multiple Eccentric Holes
von: Noga, S.
Veröffentlicht: (2016)
von: Noga, S.
Veröffentlicht: (2016)
Ähnliche Einträge
-
Dynamic Stress Intensity Factor for Interfacial Cracks of Mode III Emanating from Circular Cavities in Piezoelectric Bimaterials
von: Li, D., et al.
Veröffentlicht: (2016) -
Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002) -
Mechanical Stresses and Crack Analysis of Concrete under the Hygrothermic Effect
von: Dahmani, L.
Veröffentlicht: (2011) -
Effects of Geometrical Parameters on the Stress Field of Three-Dimensional Plates Weakened by Periodic Notches
von: Amini, A., et al.
Veröffentlicht: (2014) -
Numerical Analysis of Crack Propagation Path Using an Advanced Element Cracking Method
von: Zhong, Z.P., et al.
Veröffentlicht: (2014)