Elastic properties of B19’ structure of NiTi alloy under uniaxial and hydrostatic loading from first principles
The uniaxial and hydrostatic deformations of martensitic structure B19’ of NiTi shape memory alloy are studied using first-principles calculations. The bulk and Young’s moduli and the theoretical strength under uniaxial tension and hydrostatic loading are computed from crystal response to applied de...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2008 |
| Hauptverfasser: | Sestak, P., Cerny, M., Pokluda, J. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2008
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/48236 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Elastic properties of B19’ structure of NiTi alloy under uniaxial and hydrostatic loading from first principles / P. Sestak, M. Cerny, J. Pokluda // Проблемы прочности. — 2008. — № 1. — С. 20-23. — Бібліогр.: 7 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
The influence of 18Cr10NiTi and ODS 18Cr10NiTi austenitic stainless steels microstructure on the deuterium desorption
von: Kalchenko, A.S., et al.
Veröffentlicht: (2020)
von: Kalchenko, A.S., et al.
Veröffentlicht: (2020)
Phase transformations and mechanical properties of NiTi based shape memory alloy
von: V. P. Yasnii, et al.
Veröffentlicht: (2018)
von: V. P. Yasnii, et al.
Veröffentlicht: (2018)
Micromechanism of fatigue cracks propagation in pseudoelastic NiTi alloy with shape memory
von: V. P. Yasnii, et al.
Veröffentlicht: (2020)
von: V. P. Yasnii, et al.
Veröffentlicht: (2020)
On the practical application of the 18Cr10NiTi steel after barocryodeformation
von: P. A. Khajmovich
Veröffentlicht: (2016)
von: P. A. Khajmovich
Veröffentlicht: (2016)
Influence of high-dose ion implantation of NiTi equiatomic on shape memory and pseudoelastic
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2012)
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2012)
The influence of artificial saliva on NiTi orthodontic wires: a study on surface characterization
von: I. Ьnal, et al.
Veröffentlicht: (2011)
von: I. Ьnal, et al.
Veröffentlicht: (2011)
The influence of artificial saliva on NiTi orthodontic wires: a study on surface characterization
von: Ünal, I., et al.
Veröffentlicht: (2011)
von: Ünal, I., et al.
Veröffentlicht: (2011)
Influence of high-dose ion implantation of NiTi equiatomic on shape memory and pseudoelastic
von: Pogrebnjak, A., et al.
Veröffentlicht: (2012)
von: Pogrebnjak, A., et al.
Veröffentlicht: (2012)
Формирование неоднородной структуры в приповерхностных слоях NiTi в результате ионной имплантации
von: Погребняк, А.Д., et al.
Veröffentlicht: (2009)
von: Погребняк, А.Д., et al.
Veröffentlicht: (2009)
U-SANS Analysis of As-Sintered and PEC-Treated NiTi SMA Produced by Metal Injection Moulding
von: Giuliani, A., et al.
Veröffentlicht: (2010)
von: Giuliani, A., et al.
Veröffentlicht: (2010)
Effect of hydrostatic pressure on structural and electronic properties of TGS crystals (first-principle calculations)
von: Andriyevsky, B., et al.
Veröffentlicht: (2007)
von: Andriyevsky, B., et al.
Veröffentlicht: (2007)
Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
A finite element comparison between two sizes of NiTi commercial staples used in scaphoid fracture fixation
von: M. K. Majd, et al.
Veröffentlicht: (2023)
von: M. K. Majd, et al.
Veröffentlicht: (2023)
First-principles calculations atomic structure and elastic properties of Ti-Nb alloys
von: Timoshevskii, A.N., et al.
Veröffentlicht: (2012)
von: Timoshevskii, A.N., et al.
Veröffentlicht: (2012)
High-resolution transmission electron microscopy study of crystallography and morphology of TiC precipitates in argon-irradiated 18Cr10NiTi steel
von: Kalchenko, A.S., et al.
Veröffentlicht: (2021)
von: Kalchenko, A.S., et al.
Veröffentlicht: (2021)
Swelling prediction of AISI 304 and 18Cr10NiTi austenitic stainless steels using various empirical functions
von: Kalchenko, A.S., et al.
Veröffentlicht: (2022)
von: Kalchenko, A.S., et al.
Veröffentlicht: (2022)
Effect of argon-ion irradiation on cavity formation in 18Cr10NiTi austenitic steel and its strengthened version
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)
Interaction of elastic and spin waves in a uniaxial ferromagnet
von: A. G. Danilevich
Veröffentlicht: (2015)
von: A. G. Danilevich
Veröffentlicht: (2015)
Interaction of elastic and spin waves in a uniaxial ferromagnet
von: O. H. Danylevych
Veröffentlicht: (2015)
von: O. H. Danylevych
Veröffentlicht: (2015)
The estimation of energy and elastic properties of TiAlNb materials based on results of first principles calculations
von: L. I. Ovsiannikova, et al.
Veröffentlicht: (2021)
von: L. I. Ovsiannikova, et al.
Veröffentlicht: (2021)
Effect of grain boundary on the cavity formation behavior in 1.4 MeV Ar⁺ irradiated 18Cr10NiTi-ODS steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2023)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2023)
Comparative study of helium bubble formation in Cr-Fe-Ni-Mn high-entropy alloy and 18Cr10NiTi steel after irradiation and post-irradiation annealing
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)
The first principle calculation of electronic and optical properties of AlN, GaN and InN compounds under hydrostatic pressure
von: Berrah, S., et al.
Veröffentlicht: (2006)
von: Berrah, S., et al.
Veröffentlicht: (2006)
First-principles study of optical, elastic anisotropic and thermodynamic properties of TiN under high temperature and high pressure
von: Yang, R., et al.
Veröffentlicht: (2017)
von: Yang, R., et al.
Veröffentlicht: (2017)
Elasticity and fatigue of Ti—Si system deformed alloys at highfrequency load
von: S. A. Firstov, et al.
Veröffentlicht: (2013)
von: S. A. Firstov, et al.
Veröffentlicht: (2013)
Hydrostatic pressure in granular environment
von: O. I. Herasymov, et al.
Veröffentlicht: (2022)
von: O. I. Herasymov, et al.
Veröffentlicht: (2022)
Hydrostatic pressure in granular environment
von: Gerasymov, Oleg I., et al.
Veröffentlicht: (2022)
von: Gerasymov, Oleg I., et al.
Veröffentlicht: (2022)
A first-principles study of structure, elastic and electronic properties of GeTiO3 as environmentally innocuous feroelectric perovskites
von: G. K. Shiferaw, et al.
Veröffentlicht: (2021)
von: G. K. Shiferaw, et al.
Veröffentlicht: (2021)
A first-principles study of structure, elastic and electronic properties of GeTiO3 as environmentally innocuous feroelectric perovskites
von: G. K. Shiferaw, et al.
Veröffentlicht: (2021)
von: G. K. Shiferaw, et al.
Veröffentlicht: (2021)
Effect of hydrostatic pressure on the kinetics of ordering of ferroelectrics upon first-order phase transitions
von: Ju. Mazur, et al.
Veröffentlicht: (2016)
von: Ju. Mazur, et al.
Veröffentlicht: (2016)
Elastic and electronic properties of fluorite RuO₂ from first principle
von: Yang, Z.J., et al.
Veröffentlicht: (2012)
von: Yang, Z.J., et al.
Veröffentlicht: (2012)
To Choice of Model of Limiting State of Heat-Resistant Materials under Uniaxial Asymmetric Loading
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2018)
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2018)
Influence of uniaxial and hydrostatic pressures and shear stress σ5 on the phase transition and thermodynamic properties of quasi-one-dimensional ferroelectrics of the CsH2PO4 type
von: A. S. Vdovych, et al.
Veröffentlicht: (2020)
von: A. S. Vdovych, et al.
Veröffentlicht: (2020)
Fatigue life of S355JR steel under uniaxial constant amplitude and random loading conditions
von: A. Nieslony, et al.
Veröffentlicht: (2019)
von: A. Nieslony, et al.
Veröffentlicht: (2019)
Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
von: A. Falkowska, et al.
Veröffentlicht: (2015)
von: A. Falkowska, et al.
Veröffentlicht: (2015)
The role of interstitial (crowdion) mass-transfer for crack high-temperature healing under uniaxial loading
von: Volosyuk, M.A., et al.
Veröffentlicht: (2015)
von: Volosyuk, M.A., et al.
Veröffentlicht: (2015)
Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
von: Falkowska, A., et al.
Veröffentlicht: (2015)
von: Falkowska, A., et al.
Veröffentlicht: (2015)
Conductivity, strength and morphometry of diamonds, synthesized in the Ni-B-Ti-C system
von: O. I. Cherniienko, et al.
Veröffentlicht: (2016)
von: O. I. Cherniienko, et al.
Veröffentlicht: (2016)
Properties of Mo–Ni–B phases and alloys in the Ni–MoNi–Mo2NiB2–Ni2B region
von: V. Z. Kublii, et al.
Veröffentlicht: (2020)
von: V. Z. Kublii, et al.
Veröffentlicht: (2020)
The influence of hydrostatic pressure on DADP-type antiferroelectrics
von: Levitskii, R.R., et al.
Veröffentlicht: (1998)
von: Levitskii, R.R., et al.
Veröffentlicht: (1998)
Ähnliche Einträge
-
The influence of 18Cr10NiTi and ODS 18Cr10NiTi austenitic stainless steels microstructure on the deuterium desorption
von: Kalchenko, A.S., et al.
Veröffentlicht: (2020) -
Phase transformations and mechanical properties of NiTi based shape memory alloy
von: V. P. Yasnii, et al.
Veröffentlicht: (2018) -
Micromechanism of fatigue cracks propagation in pseudoelastic NiTi alloy with shape memory
von: V. P. Yasnii, et al.
Veröffentlicht: (2020) -
On the practical application of the 18Cr10NiTi steel after barocryodeformation
von: P. A. Khajmovich
Veröffentlicht: (2016) -
Influence of high-dose ion implantation of NiTi equiatomic on shape memory and pseudoelastic
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2012)