Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
S — N curve of austempered ductile iron was obtained in the range of lifetime including low cycle fatigue domain and high cycle fatigue domain up to 108 cycles. Ultimate tensile strength is used as a limiting value of the curve. Symmetric push-pull fatigue and tensile tests were performed at room te...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2008 |
| Hauptverfasser: | Zapletal, J., Vechet, S., Kohout, J., Obrtlik, K. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2008
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/48240 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit / J. Zapletal, S. Vechet, J. Kohout, K. Obrtlfk // Проблемы прочности. — 2008. — № 1. — С. 40-43. — Бібліогр.: 7 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: He, X., et al.
Veröffentlicht: (2013)
von: He, X., et al.
Veröffentlicht: (2013)
Tensile strength of the brittle materials, probabilistic or deterministic approach?
von: Jeong, J., et al.
Veröffentlicht: (2006)
von: Jeong, J., et al.
Veröffentlicht: (2006)
Method of the shortcut estimation of rails reliability by the fatigue strength criterion
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
von: Luo, W.B., et al.
Veröffentlicht: (2018)
von: Luo, W.B., et al.
Veröffentlicht: (2018)
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: X. He, et al.
Veröffentlicht: (2013)
von: X. He, et al.
Veröffentlicht: (2013)
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)
von: Arsić, D., et al.
Veröffentlicht: (2016)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)
von: Fan, X.L., et al.
Veröffentlicht: (2014)
Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
von: Gopkalo, A.P.
Veröffentlicht: (2009)
von: Gopkalo, A.P.
Veröffentlicht: (2009)
On local fatigue life and fatigue strength
von: V. L. Busov, et al.
Veröffentlicht: (2010)
von: V. L. Busov, et al.
Veröffentlicht: (2010)
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)
von: Zedira, H., et al.
Veröffentlicht: (2004)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Size effect in contact fatigue
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
von: Major, S., et al.
Veröffentlicht: (2008)
von: Major, S., et al.
Veröffentlicht: (2008)
Wear-fatigue test methods and their significance
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
Study on Fatigue Life of Plow Bit under Different Planning Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2014)
von: Zhang, Q., et al.
Veröffentlicht: (2014)
Probabilistic Fatigue Crack Initiation and Propagation Fields Using the Strain Energy Density
von: Correia, J.A.F.O., et al.
Veröffentlicht: (2018)
von: Correia, J.A.F.O., et al.
Veröffentlicht: (2018)
A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)
von: Adib, H., et al.
Veröffentlicht: (2004)
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)
von: Ferro, P., et al.
Veröffentlicht: (2016)
Fatigue of NPP Components and Piping under Service Conditions
von: Filatov, V.M.
Veröffentlicht: (2004)
von: Filatov, V.M.
Veröffentlicht: (2004)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
von: Wang, X.R., et al.
Veröffentlicht: (2018)
von: Wang, X.R., et al.
Veröffentlicht: (2018)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)
von: Mucha, J., et al.
Veröffentlicht: (2015)
Recent developments to improve the quality and economics of testing for fatigue and fracture
von: Sunder, R.
Veröffentlicht: (2009)
von: Sunder, R.
Veröffentlicht: (2009)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
In situ scanning electron microscopy study of fatigue crack propagation
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Thermal Fatigue Resistance of Bionic Compacted Graphite Cast Iron Treated with the Twice Laser Process in Water
von: Liu, Y., et al.
Veröffentlicht: (2015)
von: Liu, Y., et al.
Veröffentlicht: (2015)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2019)
von: Hu, X.L., et al.
Veröffentlicht: (2019)
Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
von: Razavi, S.M.J., et al.
Veröffentlicht: (2017)
von: Razavi, S.M.J., et al.
Veröffentlicht: (2017)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
Fatigue life of welded joints according to energy criteria in the critical plane
von: Lagoda, T.
Veröffentlicht: (2006)
von: Lagoda, T.
Veröffentlicht: (2006)
A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
von: Zhao, W., et al.
Veröffentlicht: (2015)
von: Zhao, W., et al.
Veröffentlicht: (2015)
Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
von: Konecna, R., et al.
Veröffentlicht: (2008)
von: Konecna, R., et al.
Veröffentlicht: (2008)
Service loading test as a source for the fatigue curve parameters’ estimation
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
Fatigue strength of hybride sucker rods
von: B. V. Kopei, et al.
Veröffentlicht: (2018)
von: B. V. Kopei, et al.
Veröffentlicht: (2018)
Static and fatigue strength of basalt reinforcement
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2013)
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: He, X., et al.
Veröffentlicht: (2013) -
Tensile strength of the brittle materials, probabilistic or deterministic approach?
von: Jeong, J., et al.
Veröffentlicht: (2006) -
Method of the shortcut estimation of rails reliability by the fatigue strength criterion
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009) -
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018) -
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
von: Luo, W.B., et al.
Veröffentlicht: (2018)